SANWA SUPPLY INC.

64-0873-39 蓝光屏幕保护器 (最大10.1英寸) LCD-101WBCF

功能

  • Supports up to 10.1 models.
  • Free cut type blue light cut liquid crystal protection fingerprint protection gloss film which can be cut to any size.
  • You can cut it to your desired size and attach it.
  • At the blue light main wavelength of 450 nm of the LED back monitor, about 26% cut.
  • The blue light, which is difficult to absorb by the lens of the eye and can damage the retina, is cut in concentration. Recommended for eye strain.
  • It reduces blue light and absorbs inside and outside of the film, making it easy on the eyes.
  • Fingerprint prevention prevents fingerprints from sticking to the film.
  • Since the adhesive surface is made of silicone material, it sticks perfectly to the LCD screen.
  • Double-sided tape is not required.
  • Ideal for Windows8 touch. Touch panel compatible.
  • Protects the LCD screen from dust, fingerprints, scratches, etc.

规格

  • 材料:粘接表面/硅膜,表面/PET
  • 尺寸:W 190 x D 0.2 x H 270 mm
  • 数量:1件
  • 反射率:5%
  • 透过率:81%
  • 紫外线切割:99.9%
  • 表面硬度:2~3H
  • *薄膜为蓝光切割,防指纹光泽类型。
  • *以上是测量值,不是保证值。[保护膜切割方法] (1) 使用包装背面的网格纸测量安装设备的尺寸。2用方格纸决定从4个标记中剪切的大小。
  • *如果您的平板电脑或其他设备是平的框架,让它更大一些 (2至3毫米) ,使其覆盖整个LCD。
  • ※如果有LCD屏幕和边框之间有台阶的型号,请缩小 (2~3mm) 。这是因为如果尺寸合适的话,上下左右很难对齐。3将薄膜主体置于网格纸上并剪下。(可以用剪刀剪,但建议用切刀剪得漂亮一点。)[保护膜粘贴方法] (1) 清洁LCD屏幕和主机。(如果灰尘被夹住,可能会产生气泡。)2涂膜前揭去胶纸。取下的一侧是可以安装在LCD屏幕上的一侧。卸除指甲油时,要在灰尘较少的地方工作,以防止灰尘产生静电。3从边缘慢慢地涂上保护膜。用柔软的布把空气推开的话会更容易粘住。
  • ※因为会有损坏,所以请注意不要用力按液晶显示屏。
  • *使用剪刀或切刀切割产品时,请注意不要受伤。
  • *Sanwa Supply不对因本产品断线而导致的任何事故或损坏承担任何责任。
  • *将产品涂在平板等平板设备的整个表面时,无法测量转角的R (弯曲) 。保护LCD的凿子。
  • *切割薄膜可能会在薄膜边缘上放置负载,导致部分薄膜漂浮。谢谢您的理解。
  •  

封装大小:208×3×303 mm 60 g  [关于封装大小]

第号命令。 64-0873-39
型号号。 LCD-101WBCF
JAN代码 4969887869659
标准价格 JPY: 2,980 USD: 18.69
Excange rate 1USD= 159.42JPY
Valid price in Japan
数量 1piece
日本股票
供应商存货