OMRON Corporation (FA and control equipment)

［Discontinued］Proximity Sensor Barrel Type Detection Range 4 mm Screw Nominal M12 x 1 Embedded 1 kHz　E2AS12KS04M1B1

E2A, short body, stainless steel
PBTP Detection Surface Material LED Display Current Consumption: 15 mA Maximum Switching Current: 200 mA Short Circuit Protection, Reverse Polarity Protection

OMRON Corporation (FA and control equipment)

［Discontinued］PLC (CPU Unit) Unit Series Name: CJ1M 20,000 (Program Memory) Steps, 32000 (Data Memory) Words　CJ1M-CPU23

CPU CJ1M-CPU2
Similar to CJ1M-CPU1, but with built-in 10 x 24 V dc/line driver input and 6 x 5-24 V dc NPN output (300 mA per point). This built-in I/O can be configured for use with 2 x 100 kHz pulse input and output ports. It is also ideal for use in applications that require servo/stepper positioning functions. 2 RS-232 ports Compact Flash card slot

OMRON Corporation (FA and control equipment)

［Discontinued］Optical fiber sensor IP67 12 → 24 V dc　E32DC200

E32 Series Fiber Sensing Head
Wide lineup for a variety of applications IP67 (IP 50 E32 - L 25) All fibers are 2 m long black PE Allowable bend radius: minimum 25 mm Adjust the length with the supplied cutting tool and insert into the clamp opening of the amplifier Operating temperature range -40°C +70°C wafer-mapped ultra-thin through-beam fiber

OMRON Corporation (FA and control equipment)

［Discontinued］Optical fiber sensor IP67　E32-T11N

The detection distance is measured using white paper as the sensing object.
E32 N fiber-optic detection head (light angle)

OMRON Corporation (FA and control equipment)

［Discontinued］Proximity sensor barrel type detection range 25 mm　E2K-C25ME22M

long-range barrel sensor
E2K-C series adjustable long-range sensors detect both metallic and non-metallic objects (Water, plastic, etc.)

OMRON Corporation (FA and control equipment)

［Discontinued］Proximity Sensor Block Detection Range 10 mm Flange Mount 500 Hz　TL-N10ME12MOMS

TL-N; TL-Q standard induction sensor
Inductive proximity sensor models in the TL-N and TL-Q series are ideal for limiting control, aggregation control and other applications.

OMRON Corporation (FA and control equipment)

［Discontinued］Proximity Sensor Barrel Type Detection Range 3 mm Screw Nominal M12 x 1 Embedded 1 kHz　E2E-X3D2-N2MOMS

DC2 wire sensor with E2EX shield
The E2EX series sensors are standard proximity sensors for detecting non-ferrous metals.

OMRON Corporation (FA and control equipment)

［Discontinued］For Bus Coupler NX Series CPU Units　NXECC203

NX Series EtherCAT Coupler Units
Omron's NX-ECC series EtherCAT coupler unit. It combines the flexibility of remote I/O configuration with the speed and decisiveness of EtherCAT. This EtherCAT coupler unit on the NX Series links EtherCAT machine control with the NX Series I/O units. The NX series works well with Sysmac machine automation controllers. The NX-ECC coupler unit boasts high reliability and quality.

OMRON Corporation (FA and control equipment)

［Discontinued］Inductive Proximity Sensor Barrel Detection Range 8 mm Screw Nominal M12　E2A-M12LN08-M1-B1

OMRON Corporation (FA and control equipment)

［Discontinued］Encoder feedback card differential and　3G3AX-PG01

The Omron 3G3AX-PG01 is an encoder feedback card for differential phase A, B and Z input and pulse monitor output with a maximum PG frequency range of 100 kHz Frequency Inverter Accessory

OMRON Corporation (FA and control equipment)

［Discontinued］Inverter 3G3MX2 400 V ac 0.75 kW AC Motor　3G3MX2-A4004-E-ECT

The Omron MX2 series inverters were developed specifically for your use. MX2 was developed to harmonize Advanced motor and machine control. With its advanced design and algorithms, the MX2 provides smooth control down to zero speed, precision cycling, and torque control in the open loop. High starting torque: 200% @ 0.5 Hz Torque control with open loop vector Dual rating: VT 120%/1 min and CT 150%/1 min IM and PM motor control Compliant to ISO13849-1 category 3 Performance level PLD Logic programming Integrated positioning function Integrated with Omron Machine Automation Fieldbus communication: EtherCAT, Modbus, DeviceNet, Profibus, CompoNet, MECHATROLINK-II, EtherNet/IP rating: 200 V single phase 0.1 ~ 2.2 kW, 200 V three phase 0.1 ~ 15.0 kW, 400 V three phase 0.4 ~ 15.0 kW.

OMRON Corporation (FA and control equipment)

［Discontinued］Inverter AX-FIR 400 V ac 4 kW　AX-FIR3010-RE

The Omron AX-FIR is an RX footprint RFI filter for the 0.44.0 kW model. Compatible with RX frequency inverters. RX Frequency Inverter Accessories

OMRON Corporation (FA and control equipment)

［Discontinued］bar code reader　V420-F000W12M-SRX

The Omron V420-F series MicroHAWK is an autofocus multi-code reader that can read code at various distances. We have a 5-megapixel sensor. We also have a corner exit cable. Use Serial RS-232, USB, or Ethernet over USB as communication media. Supports 60 frames per second. Aluminum die cast, aluminum (black), used as a case material. The model number structure allows users to design and build models according to their requirements. Simple configuration with web link Operating temperature range: 0 → +45 °C

OMRON Corporation (FA and control equipment)

［Discontinued］Inverter CIMR-A 400 V ac 1.5 kW AC Motor　CIMR-AC4A0005FAA

Omron A1000 series inverters have current vector control with/without PG, high starting torque (200%/0.3 Hz, speed range 1: 200 OLV), and (200% @ 0 r/min with a speed range of 1: 1500 CLV). Dual rated ND 120%/1 min and HD 150%/1 min. It has advanced automatic tuning of IM and PM motors by using low-noise low-carrier technology and open-loop control of PM motors. It has a screw-free terminal and a control terminal with memory backup. Heavy-duty current: 4.8 A Number of phase 3 Maximum output frequency: 400 Hz

OMRON Corporation (FA and control equipment)

［Discontinued］Vision Sensor　7412-2000-2101

The Omron MicroHAWK MV-40 is a rugged, ultra-compact device. Supports FTP image storage. It has 2 GB of non-volatile flash memory and 256 MB of RAM. Operating temperature range: 0 → +45 °C

OMRON Corporation (FA and control equipment)

［Discontinued］I/O Unit Powered CS1/CJ1 DeviceNet or Component for Master Unit　GRT1-PC8-1

The Omron GRT1-PC8-1 is a smart slice I/O power feed module with 4 x V and 8 x G terminals. Protection rating: IP20

OMRON Corporation (FA and control equipment)

［Discontinued］3G3RX option PROFIBUS DP communication　3G3AX-RX-PRT-E

The Omron communication option board functions as a gateway for running and stopping the inverter, setting and referencing parameters, and the output frequency option board functions as a gateway for passing register values communicated from the PROFIBUS network to the inverter and vice versa. The PROFIBUS Master can read/write parameter data via the option board using the mailboxes provided by some modules and the PROFIdrive DP-V1 parameter channel. The option board can be configured simply by wiring the unit, setting the PROFIBUS node address (page 180) and device profile (page 182), and restarting the device. When the power is turned on, the unit settings are automatically read. You do not need to use special programming equipment to configure it. All parameters required by the option board are stored in the inverter. Option boards are replaceable and do not require reconfiguration. The option board automatically detects the master communication baud rate, so no user configuration is required.

OMRON Corporation (FA and control equipment)

［Discontinued］Inverter J1000 400 V ac 0.75 kW J1000　JZA40P4BAA

The Omron JZA40P4BAA is a 0.55 kW heavy-duty rated inverter drive. The rated voltage supply voltage is 415 V ac, and the maximum output frequency is 400 Hz in 3 phases. Thermal function overload detection function of excellent torque performance motor

OMRON Corporation (FA and control equipment)

［Discontinued］Inverter AX 400 Vac 11 kW AC Motor　AX-FIR3030-RE

The Omron RX series frequency inverters feature high start-up torque of up to 200% in the open loop (at 0.3 Hz) and sensorless and vector closed-loop control of up to 0 Hz in the closed loop. Built-in EMC filter, logic programming, and application capabilities. Omron meets both quality and reliability requirements. It also provides Ability to easily and quickly customize the inverter to suit your needs. The RX series is the perfect tool for the job. Of course, Omron also comes with a wealth of application features that can be customized to your exact requirements. Dual rating: VT 120%/1 min and CT 150%/1 min Positioning function Automatic energy saving Micro surge voltage suppression Communication options: Modbus, DeviceNet, PROFIBUS, CompoNet, EtherCAT, ML2 Regeneration solutions available

OMRON Corporation (FA and control equipment)

［Discontinued］Inverter CIMR-AC 400 Vac 5.5 kW　CIMR-AC4A0011FAA

The Omron CIMR-AC4 series is a 3 phase 400 V A1000 inverter with a maximum output frequency of 400 Hz. For heavy-duty 4 kW 9.2 A and normal-duty 5.5 kW 11.1 A. IP Class: IP20

OMRON Corporation (FA and control equipment)

［Discontinued］Inverter 3G3MX2 400 V ac 2.2 kW AC Motor　3G3MX2-A4015-E-ECT

The Omron 3G3MX2 series is a maximum output frequency inverter drive. 580 Hz. The MX2 is designed specifically for drive machines. It was developed to harmonize advanced motor and mechanical control. The MX2 also offers comprehensive features IP Grade: IP20

OMRON Corporation (FA and control equipment)

［Discontinued］Digital I/O Module Digital I/O Module CJ PLC EtherCAT Coupler Unit for NX Series CPU Unit　NXOC4633

NX Relay Digital Output Unit
This is an Omron NX Series relay digital output unit for professional use. The NX-OC Digital Output Relay operates in a free-run refresh manner and connects to the NX CPU unit in a screwless push-in manner. All models boast reliability and superior quality.

OMRON Corporation (FA and control equipment)

［Discontinued］Servo Motor 230 V ac 4.5 Nm　R88M-1M40030H-S2

The Omron 1S AC servo motor are compact and smaller size servo motors that comes with battery-free absolute multi-turn encoder or incremental encoder
They are 23 bit resolution encoder and are designed for easy EMC compliance .Pre-assembled motor cables Multi-turn encoder design without mechanics: 16-bit, 65536 turns Rated torque is 1.91 to 28.7 Nm

OMRON Corporation (FA and control equipment)

［Discontinued］Communication Module for SmartSlice MECHATROLINK II　GRT1-ML2

The Omron GRT1-M Series is a SmartSlice communication adapter MECHATROLINK II Grade of Protection (IP) IP20 that connects to up to 64 GRT1 I/O units