[XP Power]ตัวเชื่อมต่อ
ตัวกรอง
- ตามกลุ่มผลิตภัณฑ์
- ตามผลิตภัณฑ์
เรียงลําดับตาม:
-
IEC Inlet 1 Fuse Screw 10 A 264 V ac FDMM10SFR
The FDMM is contained in a compact single housing with a front accessible dual fuse holder (when the main power connector is disconnected) and a low ground leakage medical IEC inlet filter. Suitable for mains powered medical devices that require dual fuses and low ground leakage current. It provides excellent attenuation against electromagnetic interference from the main power source, while reducing conductive emissions from inside the unit to the main power source. All models that are ideal for Class I equipment have a shielded metal body and a bleed resistor to safely discharge the filter capacitor when power is removed. 40 → +110 °C wide operating temperature range up to +50 °C full power operation Filtered inlet Dual fuse screw attachment Small design Medical rating: 1, 3, 6, 10 A 6.3 x 0.8 mm faston terminal Bleed resistor Shielded metal body Wide operating temperature range 3 years warranty
1พบ ผลิตภัณฑ์
JPY: 3,430
USD: 21.34
-
IEC Inlet 1 Fuse Screw 1A 264 V ac FASAS01SFR
FASA combines EMI filters and inlets to provide superior attenuation in a compact module. These products can be used in either the consumer, commercial, ITE, and instrumentation snap-ins (FASASxxPFR) or screw attachments (FASASxxSFR). When installed on a main power supply device, it provides excellent attenuation performance to attenuate electromagnetic interference from the main power supply, while reducing conductive emissions from inside the device to the main power supply. All models that are ideal for Class I equipment have a shielded metal body and a bleed resistor to safely discharge the filter capacitor when power is removed. 40 → +110 °C Wide Operating Temperature Range Up to +50 °C Full Power Operating Filtered Inlet Screw Mounting and Snap-in Type Small Design ITE Version Rating: 1, 3, 6, 10 A 6.3 x 0.8 mm Faston Terminal Bleed ResistorShielded Metal BodyWide Operating Temperature Range 3 Year Warranty
1พบ ผลิตภัณฑ์
JPY: 1,700
USD: 10.58
-
IEC Inlet 1 Fuse 2 Pole Screw 2 A 264 V ac FFSAS02BFR
The FDMM is contained in a compact single housing with a front accessible dual fuse holder (when the main power connector is disconnected) and a low ground leakage medical IEC inlet filter. Suitable for mains powered medical devices that require dual fuses and low ground leakage current. It provides excellent attenuation against electromagnetic interference from the main power source, while reducing conductive emissions from inside the unit to the main power source. All models that are ideal for Class I equipment have a shielded metal body and a bleed resistor to safely discharge the filter capacitor when power is removed. 40 → +110 °C wide operating temperature range up to +50 °C full power with filter inlet single fuse input switch screw mounting small design ITE version rating: 1, 2, 4, 6, 10 A 6.3 x 0.8 mm faston terminal bleed resistor Shielded metal body wide operating temperature range 3 years warranty
1พบ ผลิตภัณฑ์
JPY: 5,220
USD: 32.48
-
IEC Inlet 1 Fuse Screw 3 A 264 V ac FDMM03SFR
The FDMM is contained in a compact single housing with a front accessible dual fuse holder (when the main power connector is disconnected) and a low ground leakage medical IEC inlet filter. Suitable for mains powered medical devices that require dual fuses and low ground leakage current. It provides excellent attenuation against electromagnetic interference from the main power source, while reducing conductive emissions from inside the unit to the main power source. All models that are ideal for Class I equipment have a shielded metal body and a bleed resistor to safely discharge the filter capacitor when power is removed. 40 → +110 °C wide operating temperature range up to +50 °C full power operation Filtered inlet Dual fuse screw attachment Small design Medical rating: 1, 3, 6, 10 A 6.3 x 0.8 mm faston terminal Bleed resistor Shielded metal body Wide operating temperature range 3 years warranty
1พบ ผลิตภัณฑ์
JPY: 3,430
USD: 21.34
-
IEC Inlet 1 Fuse Screw 3 A 264 V ac FASAS03SFR
FASA combines EMI filters and inlets to provide superior attenuation in a compact module. These products can be used in either the consumer, commercial, ITE, and instrumentation snap-ins (FASASxxPFR) or screw attachments (FASASxxSFR). When installed on a main power supply device, it provides excellent attenuation performance to attenuate electromagnetic interference from the main power supply, while reducing conductive emissions from inside the device to the main power supply. All models that are ideal for Class I equipment have a shielded metal body and a bleed resistor to safely discharge the filter capacitor when power is removed. 40 → +110 °C Wide Operating Temperature Range Up to +50 °C Full Power Operating Filtered Inlet Screw Mounting and Snap-in Type Small Design ITE Version Rating: 1, 3, 6, 10 A 6.3 x 0.8 mm Faston Terminal Bleed ResistorShielded Metal BodyWide Operating Temperature Range 3 Year Warranty
1พบ ผลิตภัณฑ์
JPY: 1,390
USD: 8.65
-
IEC Inlet 1 Fuse Screw 10 A 264 V ac FCSS10SFR
The FCS has a front accessible inlet (when the main power connector is disconnected). The single fuse holder incorporates a main power EMI filter in a compact single housing, providing excellent attenuation in a compact module. When installed in a main power supply drive ITE device, it exhibits excellent attenuation performance against electromagnetic interference from the main power supply and reduces conductive radiation from inside the device to the main power supply. All models that are ideal for Class I equipment have a shielded metal body and a bleed resistor to safely discharge the filter capacitor when power is removed. 40 → +110 °C Wide Operating Temperature Range Up to +50 °C Full Power Filtered Inlet Single Fuse Screw Mounting and Snap-in Type Small Design ITE Application Rating: 1, 3, 6, 10 A 6.3 x 0.8 mm Faston Terminal Bleed Resistor Shielded Metal Body Wide Operating Temperature Range 3 Year Warranty
1พบ ผลิตภัณฑ์
JPY: 3,360
USD: 20.91
-
IEC Inlet 1 Fuse 2 Pole Screw 4 A 264 V ac FFSAS04BFR
The FDMM is contained in a compact single housing with a front accessible dual fuse holder (when the main power connector is disconnected) and a low ground leakage medical IEC inlet filter. Suitable for mains powered medical devices that require dual fuses and low ground leakage current. It provides excellent attenuation against electromagnetic interference from the main power source, while reducing conductive emissions from inside the unit to the main power source. All models that are ideal for Class I equipment have a shielded metal body and a bleed resistor to safely discharge the filter capacitor when power is removed. 40 → +110 °C wide operating temperature range up to +50 °C full power with filter inlet single fuse input switch screw mounting small design ITE version rating: 1, 2, 4, 6, 10 A 6.3 x 0.8 mm faston terminal bleed resistor Shielded metal body wide operating temperature range 3 years warranty
1พบ ผลิตภัณฑ์
JPY: 5,210
USD: 32.42
-
IEC Inlet 1 Fuse 2 Pole Screw 6 A 264 V ac FGSMA06BFR
FGSM is a medical product that combines a two-pole switch, a front-accessible (when the main power connector is disconnected) dual fuse holder, and an inlet with a low earth leakage filter into a single compact housing. When installed on a main power supply device, it provides excellent attenuation performance to attenuate electromagnetic interference from the main power supply, while reducing conductive emissions from inside the device to the main power supply. All models that are ideal for Class I equipment have a shielded metal body and a bleed resistor to safely discharge the filter capacitor when power is removed. 40 → +110 °C wide range of operating temperatures up to +50 °C full power filteringInlet with dual-fuse input switchScrew installationSmall designMedical rating: 1, 2, 4, 6, 10 A 6.3 x 0.8 mm faston terminal bleed resistorShielded metal bodyWide operating temperature range 3 years warranty
1พบ ผลิตภัณฑ์
JPY: 5,550
USD: 34.53
-
IEC Inlet 1 Fuse Screw 6 A 264 V ac FASMA06SFR
FASM combines EMI filters and inlets to provide superior attenuation in compact modules. Achieves a low ground leakage current of 5 μA @ 250 V ac for medical device applications. When installed on a main power supply device, it provides excellent attenuation performance to attenuate electromagnetic interference from the main power supply, while reducing conductive emissions from inside the device to the main power supply. All models that are ideal for Class I equipment have a shielded metal body and a bleed resistor to safely discharge the filter capacitor when power is removed. 40 → +110 °C wide operating temperature range up to +50 °C full power operation Filtered inlet screw attachment Small designMedical rating: 1, 3, 6, 10 A 6.3 x 0.8 mm faston terminalBleed resistorShielded metal bodyWide operating temperature range 3 years warranty
1พบ ผลิตภัณฑ์
JPY: 1,440
USD: 8.96
-
IEC Inlet 1 Fuse 2 Pole Screw 2 A 264 V ac FGSMA02BFR
FGSM is a medical product that combines a two-pole switch, a front-accessible (when the main power connector is disconnected) dual fuse holder, and an inlet with a low earth leakage filter into a single compact housing. When installed on a main power supply device, it provides excellent attenuation performance to attenuate electromagnetic interference from the main power supply, while reducing conductive emissions from inside the device to the main power supply. All models that are ideal for Class I equipment have a shielded metal body and a bleed resistor to safely discharge the filter capacitor when power is removed. 40 → +110 °C wide range of operating temperatures up to +50 °C full power filteringInlet with dual-fuse input switchScrew installationSmall designMedical rating: 1, 2, 4, 6, 10 A 6.3 x 0.8 mm faston terminal bleed resistorShielded metal bodyWide operating temperature range 3 years warranty
1พบ ผลิตภัณฑ์
JPY: 6,910
USD: 42.99
-
IEC Inlet 1 Fuse Screw 6 A 264 V ac FCSS06SFR
The FCS has a front accessible inlet (when the main power connector is disconnected). The single fuse holder incorporates a main power EMI filter in a compact single housing, providing excellent attenuation in a compact module. When installed in a main power supply drive ITE device, it exhibits excellent attenuation performance against electromagnetic interference from the main power supply and reduces conductive radiation from inside the device to the main power supply. All models that are ideal for Class I equipment have a shielded metal body and a bleed resistor to safely discharge the filter capacitor when power is removed. 40 → +110 °C Wide Operating Temperature Range Up to +50 °C Full Power Filtered Inlet Single Fuse Screw Mounting and Snap-in Type Small Design ITE Application Rating: 1, 3, 6, 10 A 6.3 x 0.8 mm Faston Terminal Bleed Resistor Shielded Metal Body Wide Operating Temperature Range 3 Year Warranty
1พบ ผลิตภัณฑ์
JPY: 3,360
USD: 20.91
-
IEC Inlet 1 Fuse 2 Pole Screw 4 A 264 V ac FGSMA04BFR
FGSM is a medical product that combines a two-pole switch, a front-accessible (when the main power connector is disconnected) dual fuse holder, and an inlet with a low earth leakage filter into a single compact housing. When installed on a main power supply device, it provides excellent attenuation performance to attenuate electromagnetic interference from the main power supply, while reducing conductive emissions from inside the device to the main power supply. All models that are ideal for Class I equipment have a shielded metal body and a bleed resistor to safely discharge the filter capacitor when power is removed. 40 → +110 °C wide range of operating temperatures up to +50 °C full power filteringInlet with dual-fuse input switchScrew installationSmall designMedical rating: 1, 2, 4, 6, 10 A 6.3 x 0.8 mm faston terminal bleed resistorShielded metal bodyWide operating temperature range 3 years warranty
1พบ ผลิตภัณฑ์
JPY: 5,560
USD: 34.59
-
IEC Inlet 1 Fuse Screw 3 A 264 V ac FASMA03SFR
FASM combines EMI filters and inlets to provide superior attenuation in compact modules. Achieves a low ground leakage current of 5 μA @ 250 V ac for medical device applications. When installed on a main power supply device, it provides excellent attenuation performance to attenuate electromagnetic interference from the main power supply, while reducing conductive emissions from inside the device to the main power supply. All models that are ideal for Class I equipment have a shielded metal body and a bleed resistor to safely discharge the filter capacitor when power is removed. 40 → +110 °C wide operating temperature range up to +50 °C full power operation Filtered inlet screw attachment Small designMedical rating: 1, 3, 6, 10 A 6.3 x 0.8 mm faston terminalBleed resistorShielded metal bodyWide operating temperature range 3 years warranty
1พบ ผลิตภัณฑ์
JPY: 1,380
USD: 8.59
-
IEC Inlet 1 Fuse Screw 6 A 264 V ac FDMM06SFR
The FDMM is contained in a compact single housing with a front accessible dual fuse holder (when the main power connector is disconnected) and a low ground leakage medical IEC inlet filter. Suitable for mains powered medical devices that require dual fuses and low ground leakage current. It provides excellent attenuation against electromagnetic interference from the main power source, while reducing conductive emissions from inside the unit to the main power source. All models that are ideal for Class I equipment have a shielded metal body and a bleed resistor to safely discharge the filter capacitor when power is removed. 40 → +110 °C wide operating temperature range up to +50 °C full power operation Filtered inlet Dual fuse screw attachment Small design Medical rating: 1, 3, 6, 10 A 6.3 x 0.8 mm faston terminal Bleed resistor Shielded metal body Wide operating temperature range 3 years warranty
1พบ ผลิตภัณฑ์
JPY: 3,990
USD: 24.83
-
IEC Inlet 1 Fuse Snap-in 3 A 264 V ac FASAS03PFR
FASA combines EMI filters and inlets to provide superior attenuation in a compact module. These products can be used in either the consumer, commercial, ITE, and instrumentation snap-ins (FASASxxPFR) or screw attachments (FASASxxSFR). When installed on a main power supply device, it provides excellent attenuation performance to attenuate electromagnetic interference from the main power supply, while reducing conductive emissions from inside the device to the main power supply. All models that are ideal for Class I equipment have a shielded metal body and a bleed resistor to safely discharge the filter capacitor when power is removed. 40 → +110 °C Wide Operating Temperature Range Up to +50 °C Full Power Operating Filtered Inlet Screw Mounting and Snap-in Type Small Design ITE Version Rating: 1, 3, 6, 10 A 6.3 x 0.8 mm Faston Terminal Bleed ResistorShielded Metal BodyWide Operating Temperature Range 3 Year Warranty
1พบ ผลิตภัณฑ์
JPY: 1,370
USD: 8.52
-
IEC Inlet 1 Fuse Screw 10 A 264 V ac FASMA10SFR
FASM combines EMI filters and inlets to provide superior attenuation in compact modules. Achieves a low ground leakage current of 5 μA @ 250 V ac for medical device applications. When installed on a main power supply device, it provides excellent attenuation performance to attenuate electromagnetic interference from the main power supply, while reducing conductive emissions from inside the device to the main power supply. All models that are ideal for Class I equipment have a shielded metal body and a bleed resistor to safely discharge the filter capacitor when power is removed. 40 → +110 °C wide operating temperature range up to +50 °C full power operation Filtered inlet screw attachment Small designMedical rating: 1, 3, 6, 10 A 6.3 x 0.8 mm faston terminalBleed resistorShielded metal bodyWide operating temperature range 3 years warranty
1พบ ผลิตภัณฑ์
JPY: 1,440
USD: 8.96
-
IEC Inlet 1 Fuse Screw 1A 264 V ac FCSS01SFR
The FCS has a front accessible inlet (when the main power connector is disconnected). The single fuse holder incorporates a main power EMI filter in a compact single housing, providing excellent attenuation in a compact module. When installed in a main power supply drive ITE device, it exhibits excellent attenuation performance against electromagnetic interference from the main power supply and reduces conductive radiation from inside the device to the main power supply. All models that are ideal for Class I equipment have a shielded metal body and a bleed resistor to safely discharge the filter capacitor when power is removed. 40 → +110 °C Wide Operating Temperature Range Up to +50 °C Full Power Filtered Inlet Single Fuse Screw Mounting and Snap-in Type Small Design ITE Application Rating: 1, 3, 6, 10 A 6.3 x 0.8 mm Faston Terminal Bleed Resistor Shielded Metal Body Wide Operating Temperature Range 3 Year Warranty
1พบ ผลิตภัณฑ์
JPY: 3,730
USD: 23.21
-
IEC Inlet 1 Fuse 2 Pole Screw 10 A 264 V ac FFSAS10BFR
The FDMM is contained in a compact single housing with a front accessible dual fuse holder (when the main power connector is disconnected) and a low ground leakage medical IEC inlet filter. Suitable for mains powered medical devices that require dual fuses and low ground leakage current. It provides excellent attenuation against electromagnetic interference from the main power source, while reducing conductive emissions from inside the unit to the main power source. All models that are ideal for Class I equipment have a shielded metal body and a bleed resistor to safely discharge the filter capacitor when power is removed. 40 → +110 °C wide operating temperature range up to +50 °C full power with filter inlet single fuse input switch screw mounting small design ITE version rating: 1, 2, 4, 6, 10 A 6.3 x 0.8 mm faston terminal bleed resistor Shielded metal body wide operating temperature range 3 years warranty
1พบ ผลิตภัณฑ์
JPY: 4,930
USD: 30.67
-
IEC Inlet 1 Fuse Snap-in 3 A 264 V ac FASAS06PFR
FASA combines EMI filters and inlets to provide superior attenuation in a compact module. These products can be used in either the consumer, commercial, ITE, and instrumentation snap-ins (FASASxxPFR) or screw attachments (FASASxxSFR). When installed on a main power supply device, it provides excellent attenuation performance to attenuate electromagnetic interference from the main power supply, while reducing conductive emissions from inside the device to the main power supply. All models that are ideal for Class I equipment have a shielded metal body and a bleed resistor to safely discharge the filter capacitor when power is removed. 40 → +110 °C Wide Operating Temperature Range Up to +50 °C Full Power Operating Filtered Inlet Screw Mounting and Snap-in Type Small Design ITE Version Rating: 1, 3, 6, 10 A 6.3 x 0.8 mm Faston Terminal Bleed ResistorShielded Metal BodyWide Operating Temperature Range 3 Year Warranty
1พบ ผลิตภัณฑ์
JPY: 1,360
USD: 8.46
-
IEC Inlet 1 Fuse Screw 3 A 264 V ac FCSS03SFR
The FCS has a front accessible inlet (when the main power connector is disconnected). The single fuse holder incorporates a main power EMI filter in a compact single housing, providing excellent attenuation in a compact module. When installed in a main power supply drive ITE device, it exhibits excellent attenuation performance against electromagnetic interference from the main power supply and reduces conductive radiation from inside the device to the main power supply. All models that are ideal for Class I equipment have a shielded metal body and a bleed resistor to safely discharge the filter capacitor when power is removed. 40 → +110 °C Wide Operating Temperature Range Up to +50 °C Full Power Filtered Inlet Single Fuse Screw Mounting and Snap-in Type Small Design ITE Application Rating: 1, 3, 6, 10 A 6.3 x 0.8 mm Faston Terminal Bleed Resistor Shielded Metal Body Wide Operating Temperature Range 3 Year Warranty
1พบ ผลิตภัณฑ์
JPY: 3,360
USD: 20.91
-
IEC Inlet 1 Fuse Screw 1A 264 V ac FASMA01SFR
FASM combines EMI filters and inlets to provide superior attenuation in compact modules. Achieves a low ground leakage current of 5 μA @ 250 V ac for medical device applications. When installed on a main power supply device, it provides excellent attenuation performance to attenuate electromagnetic interference from the main power supply, while reducing conductive emissions from inside the device to the main power supply. All models that are ideal for Class I equipment have a shielded metal body and a bleed resistor to safely discharge the filter capacitor when power is removed. 40 → +110 °C wide operating temperature range up to +50 °C full power operation Filtered inlet screw attachment Small designMedical rating: 1, 3, 6, 10 A 6.3 x 0.8 mm faston terminalBleed resistorShielded metal bodyWide operating temperature range 3 years warranty
1พบ ผลิตภัณฑ์
JPY: 1,380
USD: 8.59
-
IEC Inlet 1 Fuse Screw 1A 264 V ac FDMM01SFR
The FDMM is contained in a compact single housing with a front accessible dual fuse holder (when the main power connector is disconnected) and a low ground leakage medical IEC inlet filter. Suitable for mains powered medical devices that require dual fuses and low ground leakage current. It provides excellent attenuation against electromagnetic interference from the main power source, while reducing conductive emissions from inside the unit to the main power source. All models that are ideal for Class I equipment have a shielded metal body and a bleed resistor to safely discharge the filter capacitor when power is removed. 40 → +110 °C wide operating temperature range up to +50 °C full power operation Filtered inlet Dual fuse screw attachment Small design Medical rating: 1, 3, 6, 10 A 6.3 x 0.8 mm faston terminal Bleed resistor Shielded metal body Wide operating temperature range 3 years warranty
1พบ ผลิตภัณฑ์
JPY: 3,430
USD: 21.34
-
IEC Inlet 1 Fuse 2 Pole Screw 1 A 264 V ac FGSMA01BFR
FGSM is a medical product that combines a two-pole switch, a front-accessible (when the main power connector is disconnected) dual fuse holder, and an inlet with a low earth leakage filter into a single compact housing. When installed on a main power supply device, it provides excellent attenuation performance to attenuate electromagnetic interference from the main power supply, while reducing conductive emissions from inside the device to the main power supply. All models that are ideal for Class I equipment have a shielded metal body and a bleed resistor to safely discharge the filter capacitor when power is removed. 40 → +110 °C wide range of operating temperatures up to +50 °C full power filteringInlet with dual-fuse input switchScrew installationSmall designMedical rating: 1, 2, 4, 6, 10 A 6.3 x 0.8 mm faston terminal bleed resistorShielded metal bodyWide operating temperature range 3 years warranty
1พบ ผลิตภัณฑ์
JPY: 6,900
USD: 42.93
-
IEC Inlet 1 Fuse 2 Pole Screw 10 A 264 V ac FGSMA10BFR
FGSM is a medical product that combines a two-pole switch, a front-accessible (when the main power connector is disconnected) dual fuse holder, and an inlet with a low earth leakage filter into a single compact housing. When installed on a main power supply device, it provides excellent attenuation performance to attenuate electromagnetic interference from the main power supply, while reducing conductive emissions from inside the device to the main power supply. All models that are ideal for Class I equipment have a shielded metal body and a bleed resistor to safely discharge the filter capacitor when power is removed. 40 → +110 °C wide range of operating temperatures up to +50 °C full power filteringInlet with dual-fuse input switchScrew installationSmall designMedical rating: 1, 2, 4, 6, 10 A 6.3 x 0.8 mm faston terminal bleed resistorShielded metal bodyWide operating temperature range 3 years warranty
1พบ ผลิตภัณฑ์
JPY: 5,560
USD: 34.59
-
［Discontinued］IEC Inlet 1 Fuse 2 Pole Screw 1 A 264 V ac FFSAS01BFR
The FDMM is contained in a compact single housing with a front accessible dual fuse holder (when the main power connector is disconnected) and a low ground leakage medical IEC inlet filter. Suitable for mains powered medical devices that require dual fuses and low ground leakage current. It provides excellent attenuation against electromagnetic interference from the main power source, while reducing conductive emissions from inside the unit to the main power source. All models that are ideal for Class I equipment have a shielded metal body and a bleed resistor to safely discharge the filter capacitor when power is removed. 40 → +110 °C wide operating temperature range up to +50 °C full power with filter inlet single fuse input switch screw mounting small design ITE version rating: 1, 2, 4, 6, 10 A 6.3 x 0.8 mm faston terminal bleed resistor Shielded metal body wide operating temperature range 3 years warranty
1พบ ผลิตภัณฑ์
JPY: 5,510
USD: 34.28
-
［Discontinued］IEC Inlet 1 Fuse Screw 10 A 264 V ac FASAS10SFR
FASA combines EMI filters and inlets to provide superior attenuation in a compact module. These products can be used in either the consumer, commercial, ITE, and instrumentation snap-ins (FASASxxPFR) or screw attachments (FASASxxSFR). When installed on a main power supply device, it provides excellent attenuation performance to attenuate electromagnetic interference from the main power supply, while reducing conductive emissions from inside the device to the main power supply. All models that are ideal for Class I equipment have a shielded metal body and a bleed resistor to safely discharge the filter capacitor when power is removed. 40 → +110 °C Wide Operating Temperature Range Up to +50 °C Full Power Operating Filtered Inlet Screw Mounting and Snap-in Type Small Design ITE Version Rating: 1, 3, 6, 10 A 6.3 x 0.8 mm Faston Terminal Bleed ResistorShielded Metal BodyWide Operating Temperature Range 3 Year Warranty
1พบ ผลิตภัณฑ์
JPY: 1,520
USD: 9.46
