[Festo]ไฟฟ้า, ชิ้นส่วนอิเล็กทรอนิกส์
ตัวกรอง
- ตามกลุ่มผลิตภัณฑ์
- ตามผลิตภัณฑ์
เรียงลําดับตาม:
-
Cable Lead NEBC Series NEBC-M12W8-E-10-N-M12G8
Festo Connection Cable - NEBC-M12 W8-E-10-N-M12G8 The Festo NEBC Connection Cable is an 8 pin A-corded cable, round structure with open-ended connections suitable for M12 x 1 connection technology cable energy chains. This cable is part of the FESTO Simple Motion series, with a wide range of features and a complete solution for easy movement between two mechanical termination positions. Angled cable receptacle Cable length is 10 metersSocket connection typeThreaded lockMounting typeSuitable for power supply energy chainUsed for connections, this cable comes withProtection classes are IP65 and IP67 Features and benefits of the Simplified Motion seriesThis simplified motion series combines the simplicity of pneumatic with the benefits of electrical automation tasks. This simple motion series offers a range of internal drives and is the ideal solution when looking for an alternative to traditional electric drive systems, which are usually complex and complex, to replace simple movement and positioning tasks. IO-Link and Digital I/O (DIO) are included and no software is required for operation. The design is simply based on "plug and work." Plug and work principle allows easy commissioning, all parameters can be manually adjusted directly to the actuator, no software required Each drive is designed to be easily moved between Offers a complete solution with built-in two end position actuators, motor and servo driver Designed for swivel work and for applications with high loads Cable and hose with hollow shaft for integrated ducting Electrical mini slides Standardized mounting interface for direct connection to EGSL, EGSC and egss Integrated end positioning detection Simplified Motion Series products: No need for external servo drives or control cabinets for mountingYes to the Festo Simplified Motion SeriesIntegrated - The electronics built into the driveCore of the Simplified Motion SeriesSimple - For commissioning, simply set all relevant parameters directly to the drive (Velocity and force, reference end position and cushion, manual operation) Standardized - Electrical connection via M12 plug design (Power supply 4-pin: Power supply for motor, logic 8-pin control signal, sensor signal, power supply for internal electronic equipment) Connected - Use extended functionality available via IO-Link (Set motion parameters remotely, transfer parameters with copy and backup functions, read function available for advanced process parameters)
1พบ ผลิตภัณฑ์
JPY: 32,600
USD: 204.35
-
Cable Lead NEBC Series NEBC-M12G8-E-2-N-B-LE8
Festo Connecting Cable - NEBC-M12G8-E-2-N-B-LE8 The Festo NEBC connecting cable is an 8 pin A-corded cable, round structure with open-ended connections suitable for M12 x 1 connectivity technology cable energy chains. This cable is part of the FESTO Simple Motion series, with a wide range of features and a complete solution for easy movement between two mechanical termination positions. Straight cable outlet Cable length is 2 metersSocket connection typeThreaded lockMounting typeSuitable for power supply energy chainUsed for connection, this cable comes withProtection classes are IP65 and IP67 Features and benefits of the Simplified Motion seriesThe Simplified Motion series combines the simplicity of pneumatic with the benefits of electrical automation tasks. This simple motion series offers a range of internal drives and is the ideal solution when looking for an alternative to traditional electric drive systems, which are usually complex and complex, to replace simple movement and positioning tasks. IO-Link and Digital I/O (DIO) are included and no software is required for operation. The design is simply based on "plug and work." Plug and work principle allows easy commissioning, all parameters can be manually adjusted directly to the actuator, no software required Each drive is designed to be easily moved between Offers a complete solution with built-in two end position actuators, motor and servo driver Designed for swivel work and for applications with high loads Cable and hose with hollow shaft for integrated ducting Electrical mini slides Standardized mounting interface for direct connection to EGSL, EGSC and egss Integrated end positioning detection Simplified Motion Series products: No external servo drive or control cabinet required for installationYes to Festo Simplified Motion Series Integrated - The electronics in the drive are at the heart of the Simplified Motion series. Simple - For commissioning, simply set all relevant parameters directly on the drive (Velocity and force, reference end position and cushion, manual operation) Standardized - Electrical connections with M12 plug design (Power supply 4-pin: Power supply for motor, logic 8-pin control signal, sensor signal, power supply for internal electronic equipment) Connected - with enhancements available via IO-Link (Set motion parameters remotely, transfer parameters with copy and backup functions, read function available for advanced process parameters)
1พบ ผลิตภัณฑ์
JPY: 12,300
USD: 77.10
-
Connector NEBV-M12G8 - KD -3 -M12G4 Series NEBV-M12G8-KD-3-M12G4
Festo's Nebu Series 4 pin M12 connecting cable is 2.5 m and 0.5 m long and is used for VPPM proportional pressure regulators. This device works with standard angled cable outlets for plug sockets. Suitable for use with energy chains.Ambient temperature: -25 → 80 °C 2 - moderate corrosion stress
1พบ ผลิตภัณฑ์
JPY: 48,100
USD: 301.51
-
Cable lead BL Series NEBL-T12W4-E-10-N-LE4
Festo Connection Cable - NEBL-T12 W4-E-10 N-LE4 The Festo NEBL connection cable is a 4 pin T-corded cable with an M12 x 1 connection technology cable. Round structure with open-ended connections suitable for energy chains. This cable is part of the FESTO Simple Motion series, with a wide range of features and a complete solution for easy movement between two mechanical termination positions. Angled cable receptacle Cable length is 10 metersSocket connection typeThreaded lockMounting typeSuitable for power supply energy chainUsed for connections, this cable comes withProtection classes are IP65 and IP67 Features and benefits of the Simplified Motion seriesThis simplified motion series combines the simplicity of pneumatic with the benefits of electrical automation tasks. This simple motion series offers a range of internal drives and is the ideal solution when looking for an alternative to traditional electric drive systems, which are usually complex and complex, to replace simple movement and positioning tasks. IO-Link and Digital I/O (DIO) are included and no software is required for operation. The design is simply based on "plug and work." Plug and work principle allows easy commissioning, all parameters can be manually adjusted directly to the actuator, no software required Each drive is designed to be easily moved between Offers a complete solution with built-in two end position actuators, motor and servo driver Designed for swivel work and for applications with high loads Cable and hose with hollow shaft for integrated ducting Electrical mini slides Standardized mounting interface for direct connection to EGSL, EGSC and egss Integrated end positioning detection Simplified Motion Series products: No external servo drive or control cabinet required for installationYes to Festo Simplified Motion Series Integrated - The electronics in the drive are at the heart of the Simplified Motion series. Simple - For commissioning, simply set all relevant parameters directly on the drive (Velocity and force, reference end position and cushion, manual operation) Standardized - Electrical connections with M12 plug design (Power supply 4-pin: Power supply for motor, logic 8-pin control signal, sensor signal, power supply for internal electronic equipment) Connected - with enhancements available via IO-Link (Set motion parameters remotely, transfer parameters with copy and backup functions, read function available for advanced process parameters)
1พบ ผลิตภัณฑ์
JPY: 34,000
USD: 213.13
-
Pressure Sensor SPAN-V1R-R18M-PN-PN-L1
Festo's SPAN series pressure sensors are suitable for monitoring compressed air and non-corrosive gases. This measurement method is based on a piezoresistive cell for relative pressure measurement. G1/8 Pneumatic Connection Male Screw Provided and Used PN Protection Class IP40 Ambient Temperature: 0 → 50 °C
1พบ ผลิตภัณฑ์
JPY: 33,900
USD: 212.50
-
Pressure Sensor M5 SPAN-P10R-M5F-PN-PN-L1
Festo brackets are suitable for VPPM proportional pressure regulators. Product weight: 71 g
1พบ ผลิตภัณฑ์
JPY: 33,900
USD: 212.50
-
Pressure Sensor SPAN-V1R-G18M-PNLK-PNVBA-L1
FESTO NECC series plug comes with 9 pin socket and used sub-d fieldbus interface with length 58 mm Product weight: 24 g
1พบ ผลิตภัณฑ์
JPY: 37,900
USD: 237.57
-
Cable Lead NEBC Series NEBC-M12W8-E-15-N-M12G8
Festo Connection Cable - NEBC-M12 W8-E-15-N-M12G8 The Festo NEBC Connection Cable is an 8 pin A-corded cable, round structure with open-ended connections suitable for M12 x 1 connection technology cable energy chains. This cable is part of the FESTO Simple Motion series, with a wide range of features and a complete solution for easy movement between two mechanical termination positions. Angled cable receptacle Cable length is 15 metersSocket connection typeThreaded lockMounting typeSuitable for power supply energy chainUsed for connections, this cable comes withProtection classes are IP65 and IP67 Features and benefits of the Simplified Motion seriesThe Simplified Motion series combines the simplicity of pneumatic with the benefits of electrical automation tasks. This simple motion series offers a range of internal drives and is the ideal solution when looking for an alternative to traditional electric drive systems, which are usually complex and complex, to replace simple movement and positioning tasks. IO-Link and Digital I/O (DIO) are included and no software is required for operation. The design is simply based on "plug and work." Plug and work principle allows easy commissioning, all parameters can be manually adjusted directly to the actuator, no software required Each drive is designed to be easily moved between Offers a complete solution with built-in two end position actuators, motor and servo driver Designed for swivel work and for applications with high loads Cable and hose with hollow shaft for integrated ducting Electrical mini slides Standardized mounting interface for direct connection to EGSL, EGSC and egss Integrated end positioning detection Simplified Motion Series products: No external servo drive or control cabinet required for installationYes to Festo Simplified Motion Series Integrated - The electronics in the drive are at the heart of the Simplified Motion series. Simple - For commissioning, simply set all relevant parameters directly on the drive (Velocity and force, reference end position and cushion, manual operation) Standardized - Electrical connections with M12 plug design (Power supply 4-pin: Power supply for motor, logic 8-pin control signal, sensor signal, power supply for internal electronic equipment) Connected - with enhancements available via IO-Link (Set motion parameters remotely, transfer parameters with copy and backup functions, read function available for advanced process parameters)
1พบ ผลิตภัณฑ์
JPY: 40,700
USD: 255.12
-
Pressure Sensor M5 SPAN-P10R-M5F-PNLK-PNVBA-L1
FESTO hollow bolts use anodized aluminum material and are used for multiple distributor functions in combination with LK or TK components. No use of copper or PTFE
1พบ ผลิตภัณฑ์
JPY: 37,900
USD: 237.57
-
Pressure Sensor SPAN-V1R-Q4-PN-PN-L1
Festo cap nuts are used for hollow bolts. Enter codeVTM
1พบ ผลิตภัณฑ์
JPY: 32,800
USD: 205.60
-
Plug Connector NEBV-HSG2-KN-2.5 N-LE2 Series NEBV-HSG2-KN-2.5-N-LE2
Festo's NEBV series plug socket connection cables are for connecting 2.5 m long valves. NEBV Series preassembled leads come standard with 2 pin straight sockets with plug socket outlets and various types of black PVC cables Ambient temperature: -5 to 60 °C Protection Class IP40
1พบ ผลิตภัณฑ์
JPY: 1,770
USD: 11.10
-
Plug Connector NEBV-HSG2-P-5 N-LE2 Series NEBV-HSG2-P-5-N-LE2
Festo's NEBV series plug socket connection cable is used to connect 5 m long valves. NEBV Series preassembled leads come standard with 2 pin straight socket, outlet for plug socket and grey cladding with PVC cable available Ambient temperature: -5 to 60 °C Protection Class IP40
1พบ ผลิตภัณฑ์
JPY: 6,100
USD: 38.24
-
Connector NEBV-M12G8 - K -2 -M12G4 Series NEBV-M12G8-K-2-M12G4
Festo's Nebu Series 4 pin M12 connecting cable is 2 meters long. This device works with standard straight cable outlets for plug sockets. Suitable for energy chain and robot applications. Bending radius is 29 mm at surge.Ambient temperature: -25 → 85 °C 2 - moderate corrosion stress
1พบ ผลิตภัณฑ์
JPY: 30,800
USD: 193.07
-
Cable NEBC Series NEBC-M12W8-E-5-N-B-LE8
Festo Connecting Cable - NEBC-M12 W8-E-5-N-B-LE8 The Festo NEBC connecting cable is an 8 pin A-corded cable, round structure with open-ended connections suitable for M12 x 1 connection technology cable energy chains. This cable is part of the FESTO Simple Motion series, with a wide range of features and a complete solution for easy movement between two mechanical termination positions. Angled cable receptacle Cable length is 5 metersSocket connection typeThreaded lockMounting typeSuitable for power supply energy chainUsed for connections, this cable comes withProtection classes are IP65 and IP67 Features and benefits of the Simplified Motion seriesThe Simplified Motion series combines the simplicity of pneumatic with the benefits of electrical automation tasks. This simple motion series offers a range of internal drives and is the ideal solution when looking for an alternative to traditional electric drive systems, which are usually complex and complex, to replace simple movement and positioning tasks. IO-Link and Digital I/O (DIO) are included and no software is required for operation. The design is simply based on "plug and work." Plug and work principle allows easy commissioning, all parameters can be manually adjusted directly to the actuator, no software required Each drive is designed to be easily moved between Offers a complete solution with built-in two end position actuators, motor and servo driver Designed for swivel work and for applications with high loads Cable and hose with hollow shaft for integrated ducting Electrical mini slides Standardized mounting interface for direct connection to EGSL, EGSC and egss Integrated end positioning detection Simplified Motion Series products: No external servo drive or control cabinet required for installationYes to Festo Simplified Motion Series Integrated - The electronics in the drive are at the heart of the Simplified Motion series. Simple - For commissioning, simply set all relevant parameters directly on the drive (Velocity and force, reference end position and cushion, manual operation) Standardized - Electrical connections with M12 plug design (Power supply 4-pin: Power supply for motor, logic 8-pin control signal, sensor signal, power supply for internal electronic equipment) Connected - with enhancements available via IO-Link (Set motion parameters remotely, transfer parameters with copy and backup functions, read function available for advanced process parameters)
1พบ ผลิตภัณฑ์
JPY: 19,100
USD: 119.73
-
Cable Lead NEBC Series NEBC-M12G8-E-15-N-B-LE8
Festo Connecting Cable - NEBC-M12G8-E-15-N-B-LE8 Our Festo NEBC connecting cable is a 8-pin, A-coded cable with M12 x 1 connection technology cable
It is round in structure with an open-end connection which is suitable for energy chains1พบ ผลิตภัณฑ์
JPY: 34,000
USD: 213.13
-
Pressure Sensor M5 SPAN-B2R-M5F-PN-PN-L1
Festo regulator plates are used for valves Terminal VTSA and VTSA-F. The standard port pattern is 15407-2 with a maximum of 6 bars. You can select a pressure gauge with a width of 26 mm to be used with a fixed clamp connection. Assembled at any p Ambient temperature: -5 → 50 °C Protection class IP65 Product weight: 692 g
1พบ ผลิตภัณฑ์
JPY: 33,900
USD: 212.50
-
Cable lead BL Series NEFC-M12G8-0.3-M12G5-LK
Festo Connection Cable - NEFC-M12G8 -0.3 to M12G5 - LK The Festo NEFC connection cable is an 8 pin A-corded cable with an M12 x 1 connection technology cable. M12, round structure with 5 pin end connections, suitable for energy chains. This cable is part of the FESTO Simple Motion series, with a wide range of features and a complete solution for easy movement between two mechanical termination positions. Straight cable outlet Cable length is 0.3 m Socket connection type Threaded lock mounting type Suitable for power supply energy chain connection This cable is used with Protection classes are IP65 and IP67 Features and benefits of the Simplified Motion series The Simplified Motion series combines the simplicity of pneumatic with the benefits of electrical automation tasks. This simple motion series offers a range of internal drives and is the ideal solution when looking for an alternative to traditional electric drive systems, which are usually complex and complex, to replace simple movement and positioning tasks. IO-Link and Digital I/O (DIO) are included and no software is required for operation. The design is simply based on "plug and work." Plug and work principle allows easy commissioning, all parameters can be manually adjusted directly to the actuator, no software required Each drive is designed to be easily moved between Offers a complete solution with built-in two end position actuators, motor and servo driver Designed for swivel work and for applications with high loads Cable and hose with hollow shaft for integrated ducting Electrical mini slides Standardized mounting interface for direct connection to EGSL, EGSC and egss Integrated end positioning detection Simplified Motion Series products: No external servo drive or control cabinet required for installationYes to Festo Simplified Motion Series Integrated - The electronics in the drive are at the heart of the Simplified Motion series. Simple - For commissioning, simply set all relevant parameters directly on the drive (Velocity and force, reference end position and cushion, manual operation) Standardized - Electrical connections with M12 plug design (Power supply 4-pin: Power supply for motor, logic 8-pin control signal, sensor signal, power supply for internal electronic equipment) Connected - with enhancements available via IO-Link (Set motion parameters remotely, transfer parameters with copy and backup functions, read function available for advanced process parameters)
1พบ ผลิตภัณฑ์
JPY: 15,000
USD: 94.03
-
Plug Connector NEBV-HSG2-P-1 N-LE2 Series NEBV-HSG2-P-1-N-LE2
This FESTO NEBV series plug socket connection cable is for connecting valves of 1 m length. NEBV Series preassembled leads come standard with 2 pin straight socket, outlet for plug socket and grey cladding with PVC cable available Ambient temperature: -5 to 60 °C Protection Class IP40
1พบ ผลิตภัณฑ์
JPY: 3,140
USD: 19.68
-
Plug Connector NEBV-HSG2-KN-5 N-LE2 Series NEBV-HSG2-KN-5-N-LE2
Festo's NEBV series plug socket connection cable is used to connect 5 m long valves. NEBV Series preassembled leads come standard with 2 pin straight sockets with plug socket outlets and various types of black PVC cables Ambient temperature: -5 to 60 °C Protection Class IP40
1พบ ผลิตภัณฑ์
JPY: 3,190
USD: 20.00
-
Cable Lead NEBC Series NEBC-M12G8-E-5-N-B-LE8
Festo Connecting Cable - NEBC-M12G8-E-5-N-B-LE8 The Festo NEBC connecting cable is an 8 pin A-corded cable, round structure with open-ended connections suitable for M12 x 1 connectivity technology cable energy chains. This cable is part of the FESTO Simple Motion series, with a wide range of features and a complete solution for easy movement between two mechanical termination positions. Straight cable outlet Cable length is 5 metersSocket connection typeThreaded lockMounting typeSuitable for power supply energy chainUsed for connection, this cable comes withProtection classes are IP65 and IP67 Features and benefits of the Simplified Motion seriesThe Simplified Motion series combines the simplicity of pneumatic with the benefits of electrical automation tasks. This simple motion series offers a range of internal drives and is the ideal solution when looking for an alternative to traditional electric drive systems, which are usually complex and complex, to replace simple movement and positioning tasks. IO-Link and Digital I/O (DIO) are included and no software is required for operation. The design is simply based on "plug and work." Plug and work principle allows easy commissioning, all parameters can be manually adjusted directly to the actuator, no software required Each drive is designed to be easily moved between Offers a complete solution with built-in two end position actuators, motor and servo driver Designed for swivel work and for applications with high loads Cable and hose with hollow shaft for integrated ducting Electrical mini slides Standardized mounting interface for direct connection to EGSL, EGSC and egss Integrated end positioning detection Simplified Motion Series products: No external servo drive or control cabinet required for installationYes to Festo Simplified Motion Series Integrated - The electronics in the drive are at the heart of the Simplified Motion series. Simple - For commissioning, simply set all relevant parameters directly on the drive (Velocity and force, reference end position and cushion, manual operation) Standardized - Electrical connections with M12 plug design (Power supply 4-pin: Power supply for motor, logic 8-pin control signal, sensor signal, power supply for internal electronic equipment) Connected - with enhancements available via IO-Link (Set motion parameters remotely, transfer parameters with copy and backup functions, read function available for advanced process parameters)
1พบ ผลิตภัณฑ์
JPY: 17,700
USD: 110.95
-
Cable lead BL Series NEBL-T12G4-E-15-N-LE4
Festo Connection Cable - NEBL-T12G4-E-15 N-LE4 The Festo NEBL connection cable is a 4 pin T-corded cable with an M12 x 1 connection technology cable. Round structure with open-ended connections suitable for energy chains. This cable is part of the FESTO Simple Motion series, with a wide range of features and a complete solution for easy movement between two mechanical termination positions. Straight cable outlet Cable length is 15 metersSocket connection typeThreaded lockMounting typeSuitable for power supply energy chainUsed for connection, this cable comes withProtection classes are IP65 and IP67 Features and benefits of the Simplified Motion seriesThe Simplified Motion series combines the simplicity of pneumatic with the benefits of electrical automation tasks. This simple motion series offers a range of internal drives and is the ideal solution when looking for an alternative to traditional electric drive systems, which are usually complex and complex, to replace simple movement and positioning tasks. IO-Link and Digital I/O (DIO) are included and no software is required for operation. The design is simply based on "plug and work." Plug and work principle allows easy commissioning, all parameters can be manually adjusted directly to the actuator, no software required Each drive is designed to be easily moved between Offers a complete solution with built-in two end position actuators, motor and servo driver Designed for swivel work and for applications with high loads Cable and hose with hollow shaft for integrated ducting Electrical mini slides Standardized mounting interface for direct connection to EGSL, EGSC and egss Integrated end positioning detection Simplified Motion Series products: No external servo drive or control cabinet required for installationYes to Festo Simplified Motion Series Integrated - The electronics in the drive are at the heart of the Simplified Motion series. Simple - For commissioning, simply set all relevant parameters directly on the drive (Velocity and force, reference end position and cushion, manual operation) Standardized - Electrical connections with M12 plug design (Power supply 4-pin: Power supply for motor, logic 8-pin control signal, sensor signal, power supply for internal electronic equipment) Connected - with enhancements available via IO-Link (Set motion parameters remotely, transfer parameters with copy and backup functions, read function available for advanced process parameters)
1พบ ผลิตภัณฑ์
JPY: 43,500
USD: 272.68
-
Cable lead BL Series NEBL-T12G4-E-5-N-LE4
Festo Connection Cable - NEBL-T12G4-E-5 N-LE4 The Festo NEBL connection cable is a 4 pin T-cord cable with M12 x 4 pin connection technology cable. Round structure with open-ended connections suitable for energy chains. This cable is part of the FESTO Simple Motion series, with a wide range of features and a complete solution for easy movement between two mechanical termination positions. Straight cable outlet Cable length is 5 metersSocket connection typeThreaded lockMounting typeSuitable for power supply energy chainUsed for connection, this cable comes withProtection classes are IP65 and IP67 Features and benefits of the Simplified Motion seriesThe Simplified Motion series combines the simplicity of pneumatic with the benefits of electrical automation tasks. This simple motion series offers a range of internal drives and is the ideal solution when looking for an alternative to traditional electric drive systems, which are usually complex and complex, to replace simple movement and positioning tasks. IO-Link and Digital I/O (DIO) are included and no software is required for operation. The design is simply based on "plug and work." Plug and work principle allows easy commissioning, all parameters can be manually adjusted directly to the actuator, no software required Each drive is designed to be easily moved between Offers a complete solution with built-in two end position actuators, motor and servo driver Designed for swivel work and for applications with high loads Cable and hose with hollow shaft for integrated ducting Electrical mini slides Standardized mounting interface for direct connection to EGSL, EGSC and egss Integrated end positioning detection Simplified Motion Series products: No external servo drive or control cabinet required for installationYes to Festo Simplified Motion Series Integrated - The electronics built into the drive are the heart of the Simplified Motion series. Simple - For commissioning, simply set all relevant parameters directly on the drive (Velocity and force, reference end position and cushion, manual operation) Standardized - Electrical connections with M12 plug design (Power supply 4-pin: Power supply for motor, logic 8-pin control signal, sensor signal, power supply for internal electronic equipment) Connected - with enhancements available via IO-Link (Set motion parameters remotely, transfer parameters with copy and backup functions, read function available for advanced process parameters)
1พบ ผลิตภัณฑ์
JPY: 21,800
USD: 136.65
-
Cable Lead NEBC Series NEBC-M12G8-E-10-N-M12G8
Festo Connecting Cable - NEBC-M12G8-E -10 N-M12G8 The Festo NEBC connecting cable is an 8 pin A-corded cable with round structure with open end connections suitable for M12 x 1 connection technology cable energy chains. This cable is part of the FESTO Simple Motion series, with a wide range of features and a complete solution for easy movement between two mechanical termination positions. Straight cable outlet Cable length is 10 metersSocket connection typeThreaded lockMounting typeSuitable for power supply energy chainUsed for connection, this cable comes withProtection classes are IP65 and IP67 Features and benefits of the Simplified Motion seriesThe Simplified Motion series combines the simplicity of pneumatic with the benefits of electrical automation tasks. This simple motion series offers a range of internal drives and is the ideal solution when looking for an alternative to traditional electric drive systems, which are usually complex and complex, to replace simple movement and positioning tasks. IO-Link and Digital I/O (DIO) are included and no software is required for operation. The design is simply based on "plug and work." Plug and work principle allows easy commissioning, all parameters can be manually adjusted directly to the actuator, no software required Each drive is designed to be easily moved between Offers a complete solution with built-in two end position actuators, motor and servo driver Designed for swivel work and for applications with high loads Cable and hose with hollow shaft for integrated ducting Electrical mini slides Standardized mounting interface for direct connection to EGSL, EGSC and egss Integrated end positioning detection Simplified Motion Series products: No external servo drive or control cabinet required for installationYes to Festo Simplified Motion Series Integrated - The electronics built into the drive are the heart of the Simplified Motion series. Simple - For commissioning, simply set all relevant parameters directly on the drive (Velocity and force, reference end position and cushion, manual operation) Standardized - Electrical connections with M12 plug design (Power supply 4-pin: Power supply for motor, logic 8-pin control signal, sensor signal, power supply for internal electronic equipment) Connected - with enhancements available via IO-Link (Set motion parameters remotely, transfer parameters with copy and backup functions, read function available for advanced process parameters)
1พบ ผลิตภัณฑ์
JPY: 31,200
USD: 195.58
-
Cable Lead NEBC Series NEBC-M12G8-E-2-N-M12G8
Festo Connecting Cable - NEBC-M12G8-E -2 N-M12G8 The Festo NEBC connecting cable is an 8 pin A-corded cable with round structure with open end connections suitable for M12 x 1 connection technology cable energy chains. This cable is part of the FESTO Simple Motion series, with a wide range of features and a complete solution for easy movement between two mechanical termination positions. Straight cable outlet Cable length is 2 metersSocket connection typeThreaded lockMounting typeSuitable for power supply energy chainUsed for connection, this cable comes withProtection classes are IP65 and IP67 Features and benefits of the Simplified Motion seriesThe Simplified Motion series combines the simplicity of pneumatic with the benefits of electrical automation tasks. This simple motion series offers a range of internal drives and is the ideal solution when looking for an alternative to traditional electric drive systems, which are usually complex and complex, to replace simple movement and positioning tasks. IO-Link and Digital I/O (DIO) are included and no software is required for operation. The design is simply based on "plug and work." Plug and work principle allows easy commissioning, all parameters can be manually adjusted directly to the actuator, no software required Each drive is designed to be easily moved between Offers a complete solution with built-in two end position actuators, motor and servo driver Designed for swivel work and for applications with high loads Cable and hose with hollow shaft for integrated ducting Electrical mini slides Standardized mounting interface for direct connection to EGSL, EGSC and egss Integrated end positioning detection Simplified Motion Series products: No external servo drive or control cabinet required for installationYes to Festo Simplified Motion Series Integrated - The electronics in the drive are at the heart of the Simplified Motion series. Simple - For commissioning, simply set all relevant parameters directly on the drive (Velocity and force, reference end position and cushion, manual operation) Standardized - Electrical connections with M12 plug design (Power supply 4-pin: Power supply for motor, logic 8-pin control signal, sensor signal, power supply for internal electronic equipment) Connected - with enhancements available via IO-Link (Set motion parameters remotely, transfer parameters with copy and backup functions, read function available for advanced process parameters)
1พบ ผลิตภัณฑ์
JPY: 17,700
USD: 110.95
-
Cable Lead NEBC Series NEBC-M12G8-E-5-N-M12G8
Festo Connecting Cable - NEBC-M12G8-E -5 N-M12G8 The Festo NEBC connecting cable is an 8 pin A-corded cable with round structure with open end connections suitable for M12 x 1 connection technology cable energy chains. This cable is part of the FESTO Simple Motion series, with a wide range of features and a complete solution for easy movement between two mechanical termination positions. Straight cable outlet Cable length is 5 metersSocket connection typeThreaded lockMounting typeSuitable for power supply energy chainUsed for connections, this cable comes withProtection classes are IP65 and IP67 Features and benefits of the Simplified Motion seriesThe Simplified Motion series combines the simplicity of pneumatic with the benefits of electrical automation tasks. This simple motion series offers a range of internal drives and is the ideal solution when looking for an alternative to traditional electric drive systems, which are usually complex and complex, to replace simple movement and positioning tasks. IO-Link and Digital I/O (DIO) are included and no software is required for operation. The design is simply based on "plug and work." Plug and work principle allows easy commissioning, all parameters can be manually adjusted directly to the actuator, no software required Each drive is designed to be easily moved between Offers a complete solution with built-in two end position actuators, motor and servo driver Designed for swivel work and for applications with high loads Cable and hose with hollow shaft for integrated ducting Electrical mini slides Standardized mounting interface for direct connection to EGSL, EGSC and egss Integrated end positioning detection Simplified Motion Series products: No external servo drive or control cabinet required for installationYes to Festo Simplified Motion Series Integrated - The electronics in the drive are at the heart of the Simplified Motion series. Simple - For commissioning, simply set all relevant parameters directly on the drive (Velocity and force, reference end position and cushion, manual operation) Standardized - Electrical connections with M12 plug design (Power supply 4-pin: Power supply for motor, logic 8-pin control signal, sensor signal, power supply for internal electronic equipment) Connected - with enhancements available via IO-Link (Set motion parameters remotely, transfer parameters with copy and backup functions, read function available for advanced process parameters)
1พบ ผลิตภัณฑ์
JPY: 23,200
USD: 145.43
-
Cable Lead NEBC Series NEBC-M12G8-E-10-N-B-LE8
Festo Connecting Cable - NEBC-M12G8-E-10-N-B-LE8 The Festo NEBC connecting cable is an 8 pin A-corded cable, round structure with open-ended connections suitable for M12 x 1 connectivity technology cable energy chains. This cable is part of the FESTO Simple Motion series, with a wide range of features and a complete solution for easy movement between two mechanical termination positions. Straight cable outlet Cable length is 10 metersSocket connection typeThreaded lockMounting typeSuitable for power supply energy chainUsed for connection, this cable comes withProtection classes are IP65 and IP67 Features and benefits of the Simplified Motion seriesThe Simplified Motion series combines the simplicity of pneumatic with the benefits of electrical automation tasks. This simple motion series offers a range of internal drives and is the ideal solution when looking for an alternative to traditional electric drive systems, which are usually complex and complex, to replace simple movement and positioning tasks. IO-Link and Digital I/O (DIO) are included and no software is required for operation. The design is simply based on "plug and work." Plug and work principle allows easy commissioning, all parameters can be manually adjusted directly to the actuator, no software required Each drive is designed to be easily moved between Offers a complete solution with built-in two end position actuators, motor and servo driver Designed for swivel work and for applications with high loads Cable and hose with hollow shaft for integrated ducting Electrical mini slides Standardized mounting interface for direct connection to EGSL, EGSC and egss Integrated end positioning detection Simplified Motion Series products: No external servo drive or control cabinet required for installationYes to Festo Simplified Motion Series Integrated - The electronics in the drive are at the heart of the Simplified Motion series. Simple - For commissioning, simply set all relevant parameters directly on the drive (Velocity and force, reference end position and cushion, manual operation) Standardized - Electrical connections with M12 plug design (Power supply 4-pin: Power supply for motor, logic 8-pin control signal, sensor signal, power supply for internal electronic equipment) Connected - with enhancements available via IO-Link (Set motion parameters remotely, transfer parameters with copy and backup functions, read function available for advanced process parameters)
1พบ ผลิตภัณฑ์
JPY: 25,900
USD: 162.35
-
Cable Lead NEBC Series NEBC-M12G8-E-15-N-M12G8
Festo Connecting Cable - NEBC-M12G8-E -15 N-M12G8 The Festo NEBC connecting cable is an 8 pin A-corded cable with round structure with open end connections suitable for M12 x 1 connection technology cable energy chains. This cable is part of the FESTO Simple Motion series, with a wide range of features and a complete solution for easy movement between two mechanical termination positions. Straight cable outlet Cable length is 15 metersSocket connection typeThreaded lockMounting typeSuitable for power supply energy chainUsed for connection, this cable comes withProtection classes are IP65 and IP67 Features and benefits of the Simplified Motion seriesThe Simplified Motion series combines the simplicity of pneumatic with the benefits of electrical automation tasks. This simple motion series offers a range of internal drives and is the ideal solution when looking for an alternative to traditional electric drive systems, which are usually complex and complex, to replace simple movement and positioning tasks. IO-Link and Digital I/O (DIO) are included and no software is required for operation. The design is simply based on "plug and work." Plug and work principle allows easy commissioning, all parameters can be manually adjusted directly to the actuator, no software required Each drive is designed to be easily moved between Offers a complete solution with built-in two end position actuators, motor and servo driver Designed for swivel work and for applications with high loads Cable and hose with hollow shaft for integrated ducting Electrical mini slides Standardized mounting interface for direct connection to EGSL, EGSC and egss Integrated end positioning detection Simplified Motion Series products: No external servo drive or control cabinet required for installationYes to Festo Simplified Motion Series Integrated - The electronics in the drive are at the heart of the Simplified Motion series. Simple - For commissioning, simply set all relevant parameters directly on the drive (Velocity and force, reference end position and cushion, manual operation) Standardized - Electrical connections with M12 plug design (Power supply 4-pin: Power supply for motor, logic 8-pin control signal, sensor signal, power supply for internal electronic equipment) Connected - with enhancements available via IO-Link (Set motion parameters remotely, transfer parameters with copy and backup functions, read function available for advanced process parameters)
1พบ ผลิตภัณฑ์
JPY: 39,400
USD: 246.98
-
Cable NEBC Series NEBC-M12W8-E-5-N-M12G8
Festo Connection Cable - NEBC-M12 W8-E-5-N-M12G8 The Festo NEBC Connection Cable is an 8 pin A-corded cable, round structure with open-ended connections suitable for M12 x 1 connection technology cable energy chains. This cable is part of the FESTO Simple Motion series, with a wide range of features and a complete solution for easy movement between two mechanical termination positions. Angled cable receptacle Cable length is 5 metersSocket connection typeThreaded lockMounting typeSuitable for power supply energy chainUsed for connections, this cable comes withProtection classes are IP65 and IP67 Features and benefits of the Simplified Motion seriesThe Simplified Motion series combines the simplicity of pneumatic with the benefits of electrical automation tasks. This simple motion series offers a range of internal drives and is the ideal solution when looking for an alternative to traditional electric drive systems, which are usually complex and complex, to replace simple movement and positioning tasks. IO-Link and Digital I/O (DIO) are included and no software is required for operation. The design is simply based on "plug and work." Plug and work principle allows easy commissioning, all parameters can be manually adjusted directly to the actuator, no software required Each drive is designed to be easily moved between Offers a complete solution with built-in two end position actuators, motor and servo driver Designed for swivel work and for applications with high loads Cable and hose with hollow shaft for integrated ducting Electrical mini slides Standardized mounting interface for direct connection to EGSL, EGSC and egss Integrated end positioning detection Simplified Motion Series products: No external servo drive or control cabinet required for installationYes to Festo Simplified Motion Series Integrated - The electronics in the drive are at the heart of the Simplified Motion series. Simple - For commissioning, simply set all relevant parameters directly on the drive (Velocity and force, reference end position and cushion, manual operation) Standardized - Electrical connections with M12 plug design (Power supply 4-pin: Power supply for motor, logic 8-pin control signal, sensor signal, power supply for internal electronic equipment) Connected - with enhancements available via IO-Link (Set motion parameters remotely, transfer parameters with copy and backup functions, read function available for advanced process parameters)
1พบ ผลิตภัณฑ์
JPY: 24,500
USD: 153.58
-
Cable Lead NEBC Series NEBC-M12W8-E-2-N-B-LE8
Festo Connecting Cable - NEBC-M12 W8-E-2 -N-B-LE 8 The Festo NEBC connecting cable is an 8 pin A-corded cable, round structure with open-ended connections suitable for M12 x 1 connection technology cable energy chains. This cable is part of the FESTO Simple Motion series, with a wide range of features and a complete solution for easy movement between two mechanical termination positions. Angled cable receptacle Cable length is 2 metersSocket connection typeThreaded lockMounting typeSuitable for power supply energy chainUsed for connections, this cable comes withProtection classes are IP65 and IP67 Features and benefits of the Simplified Motion seriesThe Simplified Motion series combines the simplicity of pneumatic with the benefits of electrical automation tasks. This simple motion series offers a range of internal drives and is the ideal solution when looking for an alternative to traditional electric drive systems, which are usually complex and complex, to replace simple movement and positioning tasks. IO-Link and Digital I/O (DIO) are included and no software is required for operation. The design is simply based on "plug and work." Plug and work principle allows easy commissioning, all parameters can be manually adjusted directly to the actuator, no software required Each drive is designed to be easily moved between Offers a complete solution with built-in two end position actuators, motor and servo driver Designed for swivel work and for applications with high loads Cable and hose with hollow shaft for integrated ducting Electrical mini slides Standardized mounting interface for direct connection to EGSL, EGSC and egss Integrated end positioning detection Simplified Motion Series products: No external servo drive or control cabinet required for installationYes to Festo Simplified Motion Series Integrated - The electronics in the drive are at the heart of the Simplified Motion series. Simple - For commissioning, simply set all relevant parameters directly on the drive (Velocity and force, reference end position and cushion, manual operation) Standardized - Electrical connections with M12 plug design (Power supply 4-pin: Power supply for motor, logic 8-pin control signal, sensor signal, power supply for internal electronic equipment) Connected - with enhancements available via IO-Link (Set motion parameters remotely, transfer parameters with copy and backup functions, read function available for advanced process parameters)
1พบ ผลิตภัณฑ์
JPY: 13,600
USD: 85.25
-
Cable Ni BL Series NEBL-T12W4-E-5-N-LE4
Festo Connection Cable - NEBL-T12 W4-E-5 N-LE4 The Festo NEBL connection cable is a 4 pin T-cord cable with M12 x 4 pin connection technology cable. Round structure with open-ended connections suitable for energy chains. This cable is part of the FESTO Simple Motion series, with a wide range of features and a complete solution for easy movement between two mechanical termination positions. Angled cable receptacle Cable length is 5 metersSocket connection typeThreaded lockMounting typeSuitable for power supply energy chainUsed for connections, this cable comes withProtection classes are IP65 and IP67 Features and benefits of the Simplified Motion seriesThe Simplified Motion series combines the simplicity of pneumatic with the benefits of electrical automation tasks. This simple motion series offers a range of internal drives and is the ideal solution when looking for an alternative to traditional electric drive systems, which are usually complex and complex, to replace simple movement and positioning tasks. IO-Link and Digital I/O (DIO) are included and no software is required for operation. The design is simply based on "plug and work." Plug and work principle allows easy commissioning, all parameters can be manually adjusted directly to the actuator, no software required Each drive is designed to be easily moved between Offers a complete solution with built-in two end position actuators, motor and servo driver Designed for swivel work and for applications with high loads Cable and hose with hollow shaft for integrated ducting Electrical mini slides Standardized mounting interface for direct connection to EGSL, EGSC and egss Integrated end positioning detection Simplified Motion Series products: No need for external servo drives or control cabinets for mountingYes to the Festo Simplified Motion SeriesIntegrated - The electronics built into the driveCore of the Simplified Motion SeriesSimple - For commissioning, simply set all relevant parameters directly to the drive (Velocity and force, reference end position and cushion, manual operation) Standardized - Electrical connection via M12 plug design (Power supply 4-pin: Power supply for motor, logic 8-pin control signal, sensor signal, power supply for internal electronic equipment) Connected - Use extended functionality available via IO-Link (Set motion parameters remotely, transfer parameters with copy and backup functions, read function available for advanced process parameters)
1พบ ผลิตภัณฑ์
JPY: 23,200
USD: 145.43
-
Cable lead BL Series NEBL-T12G4-E-2-N-LE4
Festo Connection Cable - NEBL-T12G4-E-2 N-LE4 The Festo NEBL connection cable is a 4 pin T-corded cable with an M12 x 1 connection technology cable. Round structure with open-ended connections suitable for energy chains. This cable is part of the FESTO Simple Motion series, with a wide range of features and a complete solution for easy movement between two mechanical termination positions. Straight cable outlet Cable length is 2 metersSocket connection typeThreaded lockMounting typeSuitable for power supply energy chainUsed for connection, this cable comes withProtection classes are IP65 and IP67 Features and benefits of the Simplified Motion seriesThe Simplified Motion series combines the simplicity of pneumatic with the benefits of electrical automation tasks. This simple motion series offers a range of internal drives and is the ideal solution when looking for an alternative to traditional electric drive systems, which are usually complex and complex, to replace simple movement and positioning tasks. IO-Link and Digital I/O (DIO) are included and no software is required for operation. The design is simply based on "plug and work." Plug and work principle allows easy commissioning, all parameters can be manually adjusted directly to the actuator, no software required Each drive is designed to be easily moved between Offers a complete solution with built-in two end position actuators, motor and servo driver Designed for swivel work and for applications with high loads Cable and hose with hollow shaft for integrated ducting Electrical mini slides Standardized mounting interface for direct connection to EGSL, EGSC and egss Integrated end positioning detection Simplified Motion Series products: No external servo drive or control cabinet required for installationYes to Festo Simplified Motion Series Integrated - The electronics in the drive are at the heart of the Simplified Motion series. Simple - For commissioning, simply set all relevant parameters directly on the drive (Velocity and force, reference end position and cushion, manual operation) Standardized - Electrical connections with M12 plug design (Power supply 4-pin: Power supply for motor, logic 8-pin control signal, sensor signal, power supply for internal electronic equipment) Connected - with enhancements available via IO-Link (Set motion parameters remotely, transfer parameters with copy and backup functions, read function available for advanced process parameters)
1พบ ผลิตภัณฑ์
JPY: 16,400
USD: 102.80
-
Plug Connector NEBV-HSG2-P-2.5 N-LE2 Series NEBV-HSG2-P-2.5-N-LE2
Festo's NEBV series plug socket connection cable is a product for connecting 2.5 m long valves. NEBV Series preassembled leads come standard with 2 pin straight socket with plug socket outlet and grey sheath with PVC cable Ambient temperature: -5 to 60 °C Protection Class IP40
1พบ ผลิตภัณฑ์
JPY: 4,320
USD: 27.08
-
Cable lead BL Series NEBL-T12W4-E-15-N-LE4
Festo Connection Cable - NEBL-T12 W4-E-15 N-LE4 The Festo NEBL connection cable is a 4 pin T-corded cable with an M12 x 1 connection technology cable. Round structure with open-ended connections suitable for energy chains. This cable is part of the FESTO Simple Motion series, with a wide range of features and a complete solution for easy movement between two mechanical termination positions. Angled cable receptacle Cable length is 15 metersSocket connection typeThreaded lockMounting typeSuitable for power supply energy chainUsed for connections, this cable comes withProtection classes are IP65 and IP67 Features and benefits of the Simplified Motion seriesThe Simplified Motion series combines the simplicity of pneumatic with the benefits of electrical automation tasks. This simple motion series offers a range of internal drives and is the ideal solution when looking for an alternative to traditional electric drive systems, which are usually complex and complex, to replace simple movement and positioning tasks. IO-Link and Digital I/O (DIO) are included and no software is required for operation. The design is simply based on "plug and work." Plug and work principle allows easy commissioning, all parameters can be manually adjusted directly to the actuator, no software required Each drive is designed to be easily moved between Offers a complete solution with built-in two end position actuators, motor and servo driver Designed for swivel work and for applications with high loads Cable and hose with hollow shaft for integrated ducting Electrical mini slides Standardized mounting interface for direct connection to EGSL, EGSC and egss Integrated end positioning detection Simplified Motion Series products: No need for external servo drives or control cabinets for mountingYes to the Festo Simplified Motion SeriesIntegrated - The electronics built into the driveCore of the Simplified Motion SeriesSimple - For commissioning, simply set all relevant parameters directly into the drive (Velocity and force, reference end position and cushion, manual operation) Standardized - Electrical connection via M12 plug design (Power supply 4-pin: Power supply for motor, logic 8-pin control signal, sensor signal, power supply for internal electronic equipment) Connected - Use extended functionality available via IO-Link (Set motion parameters remotely, transfer parameters with copy and backup functions, read function available for advanced process parameters)
1พบ ผลิตภัณฑ์
JPY: 44,800
USD: 280.83
-
Cable lead BL Series NEBL-T12W4-E-2-N-LE4
Festo Connection Cable - NEBL-T12 W4-E-2 N-LE4 The Festo NEBL connection cable is a 4 pin T-corded cable with an M12 x 1 connection technology cable. Round structure with open-ended connections suitable for energy chains. This cable is part of the FESTO Simple Motion series, with a wide range of features and a complete solution for easy movement between two mechanical termination positions. Angled cable receptacle Cable length is 2 metersSocket connection typeThreaded lockMounting typeSuitable for power supply energy chainUsed for connections, this cable comes withProtection classes are IP65 and IP67 Features and benefits of the Simplified Motion seriesThe Simplified Motion series combines the simplicity of pneumatic with the benefits of electrical automation tasks. This simple motion series offers a range of internal drives and is the ideal solution when looking for an alternative to traditional electric drive systems, which are usually complex and complex, to replace simple movement and positioning tasks. IO-Link and Digital I/O (DIO) are included and no software is required for operation. The design is simply based on "plug and work." Plug and work principle allows easy commissioning, all parameters can be manually adjusted directly to the actuator, no software required Each drive is designed to be easily moved between Offers a complete solution with built-in two end position actuators, motor and servo driver Designed for swivel work and for applications with high loads Cable and hose with hollow shaft for integrated ducting Electrical mini slides Standardized mounting interface for direct connection to EGSL, EGSC and egss Integrated end positioning detection Simplified Motion Series products: No external servo drive or control cabinet required for installationYes to Festo Simplified Motion Series Integrated - The electronics in the drive are at the heart of the Simplified Motion series. Simple - For commissioning, simply set all relevant parameters directly on the drive (Velocity and force, reference end position and cushion, manual operation) Standardized - Electrical connections with M12 plug design (Power supply 4-pin: Power supply for motor, logic 8-pin control signal, sensor signal, power supply for internal electronic equipment) Connected - with enhancements available via IO-Link (Set motion parameters remotely, transfer parameters with copy and backup functions, read function available for advanced process parameters)
1พบ ผลิตภัณฑ์
JPY: 17,700
USD: 110.95
-
Cable Lead NEBC Series NEBC-M12W8-E-2-N-M12G8
Festo Connection Cable - NEBC-M12 W8-E-2-N-M12G8 The Festo NEBC Connection Cable is an 8 pin A-corded cable, round structure with open-ended connections suitable for M12 x 1 connection technology cable energy chains. This cable is part of the FESTO Simple Motion series, with a wide range of features and a complete solution for easy movement between two mechanical termination positions. Angled cable receptacle Cable length is 2 metersSocket connection typeThreaded lockMounting typeSuitable for power supply energy chainUsed for connections, this cable comes withProtection classes are IP65 and IP67 Features and benefits of the Simplified Motion seriesThe Simplified Motion series combines the simplicity of pneumatic with the benefits of electrical automation tasks. This simple motion series offers a range of internal drives and is the ideal solution when looking for an alternative to traditional electric drive systems, which are usually complex and complex, to replace simple movement and positioning tasks. IO-Link and Digital I/O (DIO) are included and no software is required for operation. The design is simply based on "plug and work." Plug and work principle allows easy commissioning, all parameters can be manually adjusted directly to the actuator, no software required Each drive is designed to be easily moved between Offers a complete solution with built-in two end position actuators, motor and servo driver Designed for swivel work and for applications with high loads Cable and hose with hollow shaft for integrated ducting Electrical mini slides Standardized mounting interface for direct connection to EGSL, EGSC and egss Integrated end positioning detection Simplified Motion Series products: No external servo drive or control cabinet required for installationYes to Festo Simplified Motion Series Integrated - The electronics in the drive are at the heart of the Simplified Motion series. Simple - For commissioning, simply set all relevant parameters directly on the drive (Velocity and force, reference end position and cushion, manual operation) Standardized - Electrical connections with M12 plug design (Power supply 4-pin: Power supply for motor, logic 8-pin control signal, sensor signal, power supply for internal electronic equipment) Connected - with enhancements available via IO-Link (Set motion parameters remotely, transfer parameters with copy and backup functions, read function available for advanced process parameters)
1พบ ผลิตภัณฑ์
JPY: 19,100
USD: 119.73
-
Cable lead BL Series NEBL-T12G4-E-10-N-LE4
Festo Connection Cable - NEBL-T12G4-E-10 N-LE4 The Festo NEBL connection cable is a 4 pin T-corded cable with an M12 x 1 connection technology cable. Round structure with open-ended connections suitable for energy chains. This cable is part of the FESTO Simple Motion series, with a wide range of features and a complete solution for easy movement between two mechanical termination positions. Straight cable outlet Cable length is 10 metersSocket connection typeThreaded lockMounting typeSuitable for power supply energy chainUsed for connection, this cable comes withProtection classes are IP65 and IP67 Features and benefits of the Simplified Motion seriesThe Simplified Motion series combines the simplicity of pneumatic with the benefits of electrical automation tasks. This simple motion series offers a range of internal drives and is the ideal solution when looking for an alternative to traditional electric drive systems, which are usually complex and complex, to replace simple movement and positioning tasks. IO-Link and Digital I/O (DIO) are included and no software is required for operation. The design is simply based on "plug and work." Plug and work principle allows easy commissioning, all parameters can be manually adjusted directly to the actuator, no software required Each drive is designed to be easily moved between Offers a complete solution with built-in two end position actuators, motor and servo driver Designed for swivel work and for applications with high loads Cable and hose with hollow shaft for integrated ducting Electrical mini slides Standardized mounting interface for direct connection to EGSL, EGSC and egss Integrated end positioning detection Simplified Motion Series products: No external servo drive or control cabinet required for installationYes to Festo Simplified Motion Series Integrated - The electronics in the drive are at the heart of the Simplified Motion series. Simple - For commissioning, simply set all relevant parameters directly on the drive (Velocity and force, reference end position and cushion, manual operation) Standardized - Electrical connections with M12 plug design (Power supply 4-pin: Power supply for motor, logic 8-pin control signal, sensor signal, power supply for internal electronic equipment) Connected - with enhancements available via IO-Link (Set motion parameters remotely, transfer parameters with copy and backup functions, read function available for advanced process parameters)
1พบ ผลิตภัณฑ์
JPY: 32,600
USD: 204.35
-
Cable Lead NEBC Series NEBC-M12W8-E-10-N-B-LE8
Festo Connecting Cable - NEBC-M12 W8-E-10-N-B-LE8 The Festo NEBC connecting cable is an 8 pin A-corded cable, round structure with open-ended connections suitable for M12 x 1 connection technology cable energy chains. This cable is part of the FESTO Simple Motion series, with a wide range of features and a complete solution for easy movement between two mechanical termination positions. Angled cable receptacle Cable length is 10 metersSocket connection typeThreaded lockMounting typeSuitable for power supply energy chainUsed for connections, this cable comes withProtection classes are IP65 and IP67 Features and benefits of the Simplified Motion seriesThe Simplified Motion series combines the simplicity of pneumatic with the benefits of electrical automation tasks. This simple motion series offers a range of internal drives and is the ideal solution when looking for an alternative to traditional electric drive systems, which are usually complex and complex, to replace simple movement and positioning tasks. IO-Link and Digital I/O (DIO) are included and no software is required for operation. The design is simply based on "plug and work." Plug and work principle allows easy commissioning, all parameters can be manually adjusted directly to the actuator, no software required Each drive is designed to be easily moved between Offers a complete solution with built-in two end position actuators, motor and servo driver Designed for swivel work and for applications with high loads Cable and hose with hollow shaft for integrated ducting Electrical mini slides Standardized mounting interface for direct connection to EGSL, EGSC and egss Integrated end positioning detection Simplified Motion Series products: No external servo drive or control cabinet required for installationYes to Festo Simplified Motion Series Integrated - The electronics in the drive are at the heart of the Simplified Motion series. Simple - For commissioning, simply set all relevant parameters directly on the drive (Velocity and force, reference end position and cushion, manual operation) Standardized - Electrical connections with M12 plug design (Power supply 4-pin: Power supply for motor, logic 8-pin control signal, sensor signal, power supply for internal electronic equipment) Connected - with enhancements available via IO-Link (Set motion parameters remotely, transfer parameters with copy and backup functions, read function available for advanced process parameters)
1พบ ผลิตภัณฑ์
JPY: 27,200
USD: 170.50
-
Cable Lead NEBC Series NEBC-M12W8-E-15-N-B-LE8
Festo Connecting Cable - NEBC-M12 W8-E-15-N-B-LE8 The Festo NEBC connecting cable is an 8 pin A-corded cable, round structure with open-ended connections suitable for M12 x 1 connection technology cable energy chains. This cable is part of the FESTO Simple Motion series, with a wide range of features and a complete solution for easy movement between two mechanical termination positions. Angled cable receptacle Cable length is 15 metersSocket connection typeThreaded lockMounting typeSuitable for power supply energy chainUsed for connections, this cable comes withProtection classes are IP65 and IP67 Features and benefits of the Simplified Motion seriesThe Simplified Motion series combines the simplicity of pneumatic with the benefits of electrical automation tasks. This simple motion series offers a range of internal drives and is the ideal solution when looking for an alternative to traditional electric drive systems, which are usually complex and complex, to replace simple movement and positioning tasks. IO-Link and Digital I/O (DIO) are included and no software is required for operation. The design is simply based on "plug and work." Plug and work principle allows easy commissioning, all parameters can be manually adjusted directly to the actuator, no software required Each drive is designed to be easily moved between Offers a complete solution with built-in two end position actuators, motor and servo driver Designed for swivel work and for applications with high loads Cable and hose with hollow shaft for integrated ducting Electrical mini slides Standardized mounting interface for direct connection to EGSL, EGSC and egss Integrated end positioning detection Simplified Motion Series products: No external servo drive or control cabinet required for installationYes to Festo Simplified Motion Series Integrated - The electronics built into the drive are the heart of the Simplified Motion series. Simple - For commissioning, simply set all relevant parameters directly on the drive (Velocity and force, reference end position and cushion, manual operation) Standardized - Electrical connections with M12 plug design (Power supply 4-pin: Power supply for motor, logic 8-pin control signal, sensor signal, power supply for internal electronic equipment) Connected - with enhancements available via IO-Link (Set motion parameters remotely, transfer parameters with copy and backup functions, read function available for advanced process parameters)
1พบ ผลิตภัณฑ์
JPY: 35,300
USD: 221.28
-
Pressure Sensor SPAN-V1R-Q4-PNLK-PNVBA-L1
Festo solenoid coils are used to pin standard plug sockets according to DIN EN175301 and can be assembled in any position using 100% duty cycle at 24 V dc operating voltage. Minimum Pickup Time: 10 ms Protection Class IP65
1พบ ผลิตภัณฑ์
JPY: 36,900
USD: 231.30
-
Pressure Sensor M5 SPAN-B2R-M5F-PNLK-PNVBA-L1
FESTO leg mounts have a maximum tightening torque of 0.6 Nm and use steel type brackets. 2- moderate corrosion pressure
1พบ ผลิตภัณฑ์
JPY: 37,900
USD: 237.57
