[SKF]ผลิตภัณฑ์และเครื่องมือ
ตัวกรอง
- ตามกลุ่มผลิตภัณฑ์
- ตามผลิตภัณฑ์
เรียงลําดับตาม:
-
ชุดเครื่องมือกลไกอุปกรณ์สําหรับ SKF 40 TMFT 36
SKF กําลังแบ่งภาพ ชุดเครื่องมือ TMFT
1พบ ผลิตภัณฑ์
JPY: 124,000
USD: 777.28
-
ดีพกรูฟบอลขนาด 10 มม. แบริ่ง 26 มม. W 6000-2RS1/VP311
Stainless Steel Deep Groove Ball Bearings for SKF Food Line
The stainless steel deep groove ball bearings in the SKF food line series are used in a wide range of food and beverage applications. Corrosion resistance to moisture and various media, resists radial and axial loads in both directions. These bearings have a lower load capacity than similarly sized high chrome steel bearings. Manufactured with high reliability and food safety in mind, these wet corrosion environment bearings are designed to meet the needs and requirements of the food and beverage industry.1พบ ผลิตภัณฑ์
JPY: 6,010
USD: 37.67
-
ดีปกรูฟบอลขนาด 12 มม. แบริ่ง 28 มม. W 6001-2RS1/VP311
Stainless Steel Deep Groove Ball Bearings for SKF Food Line
The stainless steel deep groove ball bearings in the SKF food line series are used in a wide range of food and beverage applications. Corrosion resistance to moisture and various media, resists radial and axial loads in both directions. These bearings have a lower load capacity than similarly sized high chrome steel bearings. Manufactured with high reliability and food safety in mind, these wet corrosion environment bearings are designed to meet the needs and requirements of the food and beverage industry.1พบ ผลิตภัณฑ์
JPY: 6,630
USD: 41.56
-
ดีปกรูฟบอลขนาด 15 มม. แบริ่ง 32 มม. W 6002-2RS1/VP311
Stainless Steel Deep Groove Ball Bearings for SKF Food Line
The stainless steel deep groove ball bearings in the SKF food line series are used in a wide range of food and beverage applications. Corrosion resistance to moisture and various media, resists radial and axial loads in both directions. These bearings have a lower load capacity than similarly sized high chrome steel bearings. Manufactured with high reliability and food safety in mind, these wet corrosion environment bearings are designed to meet the needs and requirements of the food and beverage industry.1พบ ผลิตภัณฑ์
JPY: 7,780
USD: 48.77
-
17 มม. ดีปกรูฟบอล แบริ่ง 35 มม. W 6003-2RS1/VP311
Stainless Steel Deep Groove Ball Bearings for SKF Food Line
The stainless steel deep groove ball bearings in the SKF food line series are used in a wide range of food and beverage applications. Corrosion resistance to moisture and various media, resists radial and axial loads in both directions. These bearings have a lower load capacity than similarly sized high chrome steel bearings. Manufactured with high reliability and food safety in mind, these wet corrosion environment bearings are designed to meet the needs and requirements of the food and beverage industry.1พบ ผลิตภัณฑ์
JPY: 10,100
USD: 63.31
-
ดีปกรูฟบอลแบริ่ง 42 มม. W 6004-2RS1/VP311
Stainless Steel Deep Groove Ball Bearings for SKF Food Line
The stainless steel deep groove ball bearings in the SKF food line series are used in a wide range of food and beverage applications. Corrosion resistance to moisture and various media, resists radial and axial loads in both directions. These bearings have a lower load capacity than similarly sized high chrome steel bearings. Manufactured with high reliability and food safety in mind, these wet corrosion environment bearings are designed to meet the needs and requirements of the food and beverage industry.1พบ ผลิตภัณฑ์
JPY: 11,700
USD: 73.34
-
ดีปกรูฟบอลขนาด 25 มม. แบริ่ง 47 มม. W 6005-2RS1/VP311
Stainless Steel Deep Groove Ball Bearings for SKF Food Line
The stainless steel deep groove ball bearings in the SKF food line series are used in a wide range of food and beverage applications. Corrosion resistance to moisture and various media, resists radial and axial loads in both directions. These bearings have a lower load capacity than similarly sized high chrome steel bearings. Manufactured with high reliability and food safety in mind, these wet corrosion environment bearings are designed to meet the needs and requirements of the food and beverage industry.1พบ ผลิตภัณฑ์
JPY: 15,300
USD: 95.91
-
ดีปกรูฟบอลขนาด 30 มม. แบริ่ง 55 มม. W 6006-2RS1/VP311
Stainless Steel Deep Groove Ball Bearings for SKF Food Line
The stainless steel deep groove ball bearings in the SKF food line series are used in a wide range of food and beverage applications. Corrosion resistance to moisture and various media, resists radial and axial loads in both directions. These bearings have a lower load capacity than similarly sized high chrome steel bearings. Manufactured with high reliability and food safety in mind, these wet corrosion environment bearings are designed to meet the needs and requirements of the food and beverage industry.1พบ ผลิตภัณฑ์
JPY: 23,800
USD: 149.19
-
ดีปกรูฟบอลขนาด 8 มม. แบริ่ง 22 มม. W 608-2RS1/VP311
Stainless Steel Deep Groove Ball Bearings for SKF Food Line
The stainless steel deep groove ball bearings in the SKF food line series are used in a wide range of food and beverage applications. Corrosion resistance to moisture and various media, resists radial and axial loads in both directions. These bearings have a lower load capacity than similarly sized high chrome steel bearings. Manufactured with high reliability and food safety in mind, these wet corrosion environment bearings are designed to meet the needs and requirements of the food and beverage industry.1พบ ผลิตภัณฑ์
JPY: 6,420
USD: 40.24
-
ดีพกรูฟบอลขนาด 12 มม. แบริ่ง 32 มม. W 6201-2RS1/VP311
Stainless Steel Deep Groove Ball Bearings for SKF Food Line
The stainless steel deep groove ball bearings in the SKF food line series are used in a wide range of food and beverage applications. Corrosion resistance to moisture and various media, resists radial and axial loads in both directions. These bearings have a lower load capacity than similarly sized high chrome steel bearings. Manufactured with high reliability and food safety in mind, these wet corrosion environment bearings are designed to meet the needs and requirements of the food and beverage industry.1พบ ผลิตภัณฑ์
JPY: 8,290
USD: 51.97
-
15 มม. ดีปกรูฟบอล แบริ่ง 35 มม. W 6202-2RS1/VP311
Stainless Steel Deep Groove Ball Bearings for SKF Food Line
The stainless steel deep groove ball bearings in the SKF food line series are used in a wide range of food and beverage applications. Corrosion resistance to moisture and various media, resists radial and axial loads in both directions. These bearings have a lower load capacity than similarly sized high chrome steel bearings. Manufactured with high reliability and food safety in mind, these wet corrosion environment bearings are designed to meet the needs and requirements of the food and beverage industry.1พบ ผลิตภัณฑ์
JPY: 8,400
USD: 52.66
-
17 มม. ดีปกรูฟบอล แบริ่ง 40 มม. W 6203-2RS1/VP311
Stainless Steel Deep Groove Ball Bearings for SKF Food Line
The stainless steel deep groove ball bearings in the SKF food line series are used in a wide range of food and beverage applications. Corrosion resistance to moisture and various media, resists radial and axial loads in both directions. These bearings have a lower load capacity than similarly sized high chrome steel bearings. Manufactured with high reliability and food safety in mind, these wet corrosion environment bearings are designed to meet the needs and requirements of the food and beverage industry.1พบ ผลิตภัณฑ์
JPY: 10,100
USD: 63.31
-
ดีปกรูฟบอลขนาด 20 มม. แบริ่ง 47 มม. W 6204-2RS1/VP311
Stainless Steel Deep Groove Ball Bearings for SKF Food Line
The stainless steel deep groove ball bearings in the SKF food line series are used in a wide range of food and beverage applications. Corrosion resistance to moisture and various media, resists radial and axial loads in both directions. These bearings have a lower load capacity than similarly sized high chrome steel bearings. Manufactured with high reliability and food safety in mind, these wet corrosion environment bearings are designed to meet the needs and requirements of the food and beverage industry.1พบ ผลิตภัณฑ์
JPY: 13,000
USD: 81.49
-
ดีปกรูฟบอลขนาด 25 มม. แบริ่ง 52 มม. W 6205-2RS1/VP311
Stainless Steel Deep Groove Ball Bearings for SKF Food Line
The stainless steel deep groove ball bearings in the SKF food line series are used in a wide range of food and beverage applications. Corrosion resistance to moisture and various media, resists radial and axial loads in both directions. These bearings have a lower load capacity than similarly sized high chrome steel bearings. Manufactured with high reliability and food safety in mind, these wet corrosion environment bearings are designed to meet the needs and requirements of the food and beverage industry.1พบ ผลิตภัณฑ์
JPY: 14,600
USD: 91.52
-
ดีพกรูฟบอลขนาด 30 มม. แบริ่ง 62 มม. W 6206-2RS1/VP311
Stainless Steel Deep Groove Ball Bearings for SKF Food Line
The stainless steel deep groove ball bearings in the SKF food line series are used in a wide range of food and beverage applications. Corrosion resistance to moisture and various media, resists radial and axial loads in both directions. These bearings have a lower load capacity than similarly sized high chrome steel bearings. Manufactured with high reliability and food safety in mind, these wet corrosion environment bearings are designed to meet the needs and requirements of the food and beverage industry.1พบ ผลิตภัณฑ์
JPY: 26,400
USD: 165.49
-
บล็อกหมอน แบริ่ง SYWK 25 YTH 25 มม. SYWK 25 YTH
SKF Food Line Y Bearing Unit
SKF's food line Y bearing unit is an innovative solution for cleaning room-related problems such as corrosion and premature bearing failure. Productivity is improved by eliminating human errors such as misuse of grease and preventing pollution. The SKF food line Y bearing consumes less grease, eliminates the need for re-lubrication, and reduces waste.1พบ ผลิตภัณฑ์
JPY: 34,000
USD: 213.13
-
บล็อกหมอน แบริ่ง SYWK 30 YTH 30 มม. SYWK 30 YTH
SKF Food Line Y Bearing Unit
SKF's food line Y bearing unit is an innovative solution for cleaning room-related problems such as corrosion and premature bearing failure. Productivity is improved by eliminating human errors such as misuse of grease and preventing pollution. The SKF food line Y bearing consumes less grease, eliminates the need for re-lubrication, and reduces waste.1พบ ผลิตภัณฑ์
JPY: 37,900
USD: 237.57
-
บล็อคหมอต แบริ่ง SYWK 20 YTH 20 มม. SYWK 20 YTH
SKF Food Line Y Bearing Unit
SKF's food line Y bearing unit is an innovative solution for cleaning room-related problems such as corrosion and premature bearing failure. Productivity is improved by eliminating human errors such as misuse of grease and preventing pollution. The SKF food line Y bearing consumes less grease, eliminates the need for re-lubrication, and reduces waste.1พบ ผลิตภัณฑ์
JPY: 31,900
USD: 199.96
-
บล็อกหมอนแบริ่ง SYWK 40 YTH, ID 40 มม. SYWK 40 YTH
SKF Food Line Y Bearing Unit
SKF's food line Y bearing unit is an innovative solution for cleaning room-related problems such as corrosion and premature bearing failure. Productivity is improved by eliminating human errors such as misuse of grease and preventing pollution. The SKF food line Y bearing consumes less grease, eliminates the need for re-lubrication, and reduces waste.1พบ ผลิตภัณฑ์
JPY: 56,300
USD: 352.91
-
บล็อกหมอน แบริ่ง SYFWK 40 LTR, ID 40 มม. SYFWK 40 LTHR
SKF Food Line Y Bearing Unit
SKF's food line Y bearing unit is an innovative solution for cleaning room-related problems such as corrosion and premature bearing failure. Productivity is improved by eliminating human errors such as misuse of grease and preventing pollution. The SKF food line Y bearing consumes less grease, eliminates the need for re-lubrication, and reduces waste.1พบ ผลิตภัณฑ์
JPY: 86,600
USD: 542.85
-
ดีพกรูฟบอลขนาด 10 มม. แบริ่ง 26 มม. 6000-2Z/C2
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1พบ ผลิตภัณฑ์
JPY: 1,910
USD: 11.97
-
ดีปกรูฟบอลขนาด 12 มม. แบริ่ง 28 มม. 6001TN9/C3
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1พบ ผลิตภัณฑ์
JPY: 2,980
USD: 18.68
-
ดีปกรูฟบอลขนาด 15 มม. แบริ่ง 32 มม. 6002-2RSHNR
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1พบ ผลิตภัณฑ์
JPY: 6,070
USD: 38.05
-
ดีปกรูฟบอลแบริ่ง 42 มม. 6004-2RSHNR
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1พบ ผลิตภัณฑ์
JPY: 5,460
USD: 34.23
-
ดีปกรูฟบอลแบริ่ง 42 มม. 6004-2ZNR
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1พบ ผลิตภัณฑ์
JPY: 4,460
USD: 27.96
-
ดีปกรูฟบอลขนาด 25 มม. แบริ่ง 47 มม. 6005-2RSH/C4
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1พบ ผลิตภัณฑ์
JPY: 5,000
USD: 31.34
-
ดีปกรูฟบอลขนาด 25 มม. แบริ่ง 47 มม. 6005-2RSHNR
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1พบ ผลิตภัณฑ์
JPY: 6,100
USD: 38.24
-
ดีปกรูฟบอลขนาด 25 มม. แบริ่ง 47 มม. 6005-2ZNR
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1พบ ผลิตภัณฑ์
JPY: 5,210
USD: 32.66
-
ดีปกรูฟบอลขนาด 25 มม. แบริ่ง 47 มม. 6005NR
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1พบ ผลิตภัณฑ์
JPY: 4,740
USD: 29.71
-
ดีปกรูฟบอลขนาด 25 มม. แบริ่ง 47 มม. 6005TN9/C3
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1พบ ผลิตภัณฑ์
JPY: 4,590
USD: 28.77
-
ดีปกรูฟบอลขนาด 30 มม. แบริ่ง 55 มม. 6006-2RS1NR
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1พบ ผลิตภัณฑ์
JPY: 7,460
USD: 46.76
-
ดีปกรูฟบอลขนาด 40 มม. แบริ่ง 68 มม. 6008NR
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1พบ ผลิตภัณฑ์
JPY: 6,980
USD: 43.75
-
ดีปกรูฟบอลขนาด 8 มม. แบริ่ง 22 มม. 608/C3
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1พบ ผลิตภัณฑ์
JPY: 1,090
USD: 6.83
-
ดีปกรูฟบอลขนาด 8 มม. แบริ่ง 22 มม. 608-Z
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1พบ ผลิตภัณฑ์
JPY: 1,500
USD: 9.40
-
ดีปกรูฟบอลขนาด 22 มม. แบริ่ง 50 มม. 62/22
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1พบ ผลิตภัณฑ์
JPY: 5,940
USD: 37.23
-
28 มม. ดีปกรูฟบอล แบริ่ง 58มม. 62/28-2RS1/C3
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1พบ ผลิตภัณฑ์
JPY: 12,400
USD: 77.73
-
ดีพกรูฟบอลขนาด 12 มม. แบริ่ง 32 มม. 6201-2RSHNR/C3GJN
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1พบ ผลิตภัณฑ์
JPY: 3,500
USD: 21.94
-
16 มม. ดีพ กรูฟ บอล แบริ่ง 35 มม. 6202/16-2Z
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1พบ ผลิตภัณฑ์
JPY: 13,000
USD: 81.49
-
15 มม. ดีปกรูฟบอล แบริ่ง 35 มม. 6202/C4
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1พบ ผลิตภัณฑ์
JPY: 2,450
USD: 15.36
-
15 มม. ดีปกรูฟบอล แบริ่ง 35 มม. 6202-2RSH/C4HT
SKF Heat-Resistant Deep Groove Ball Bearings • SKF ball bearings are designed to increase reliability, reduce complexity, and reduce environmental impact even at high operating temperatures. Features: Excellent performance in high temperature environments, dry environments, and low rotational speedUse temperature range: -30 → 150 °CSuitable for high speed and very high speedSteel/ceramic ball materialPlain lace typeLow frictionVarious designs, types, and sizes available Why choose deep-groove ball bearingsVersatility - Supports radial and axial loads and is widely cost-efficient in many industries - Low friction torque keeps temperatures low and reduces energy costs when operating equipment such as conveyor beltsLow maintenance - No additional lubrication required after installation Use: Agricultural food processing Machinery toolsRaw materials processingMedical/pharmaceutical printing Wind power generation Inner ring diameter range: 6 mm → 40 mm Internal/external design: 2RS1 - Contact seal NBR on both sides, 2RSH - Contact seal NBR Z on both sides, 2Z - Shield on one or both sides 2RSL - RSL Low Friction Contact Seal on both sides of bearing 2RZ - RZ Low Friction Non-Contact Seal on both sides of bearing 2ZNR - Shield on both sides, Snap Ring Groove in outer ring, NR - Snap Ring Groove in outer ring, E-Reinforced Ball Set Cage Design TN9 - Glass Fiber Reinforced Polyamide 66 Cage, Centrally rolled stainless steel lubricated GJN-NLGI scale with a concentration of 2 polyurea thickener for a temperature range of -30 → +150 °C (standard fill grade) VT162 - Klueber Isoflex Topas NB52 lubricated with grease WT-NLGI scale with a concentration of 2 → 3 polyurea thickener for a temperature range of -40 → +160 °C Grease with a concentration of 2 → 3 lithium thickener for LHT-NLGI scale with a temperature range of -30 → +150 °C Grease with a concentration of 2 → 3 polyurea thickener for HT-NLGI scale with a temperature range of 40 → + 66 °C (standard fill grade) Precision/Clearance C2 - small internal radial clearance, C3 - Internal clearance greater than normal C4 - Radial internal clearance greater than C3 - Radial internal clearance greater than C5 - C4
1พบ ผลิตภัณฑ์
JPY: 5,100
USD: 31.97
