Samtec

Ribbon Cable Assembly FFSD Series　FFSD-10-D-08.00-01-N

Samtec FFSD Series 1.27 mm Tiger Eye (TM) IDC Socket Ribbon Cable Assembly
The FFSD Series Tiger Eye (TM) IDC socket ribbon cable assembly consists of a 30 AWG 0.635 mm pitch gray ribbon cable and a 1.27 mm pitch 2 row female socket with reliable gold-plated Tiger Eye (TM) contacts at one end and a polarization notch for precise engagement.

Samtec

Ribbon Cable IDT Connector 200 mm TCMD Series　TCMD-10-T-08.00-01-N

TCSD Series IDC Socket Cable Assembly
Double-ended female-to-female or male-to-oscillatory assemblies (100 mm or 200 mm length) Low profile, height 5 mm (0.200 ") Wire uses 2 mm pitch, 28 awg, 7/36 stranded, PVC-insulated copper 4 finger contact optimizes normal insertion/extraction forces TCSD uses beryllium copper, 0.76 μm gold-plated contacts TCMD uses phosphor bronze, tin-plated contacts Rated current: 1 A Contact resistance: 10 mΩ (max.) Operating temperature range: -40 to +105 °C

Samtec

Ribbon Cable IDT Connector 200 mm TCMD Series　TCMD-15-T-08.00-01-N

TCSD Series IDC Socket Cable Assembly
Double-ended female-to-female or male-to-oscillatory assemblies (100 mm or 200 mm length) Low profile, height 5 mm (0.200 ") Wire uses 2 mm pitch, 28 awg, 7/36 stranded, PVC-insulated copper 4 finger contact optimizes normal insertion/extraction forces TCSD uses beryllium copper, 0.76 μm gold-plated contacts TCMD uses phosphor bronze, tin-plated contacts Rated current: 1 A Contact resistance: 10 mΩ (max.) Operating temperature range: -40 to +105 °C

Samtec

Board Connection Socket QSE Series 0.8 mm 120 Pole 2 Row Straight Surface Mounted　QSE-060-01-L-D-A

QSE Series High-Speed Socket
This QSE Series 0.8 mm pitch socket includes alignment pins, gold-plated contacts, ground surfaces, and tin-plated tails.

Samtec

Board Connection Socket QSS Series 0.635 mm 100 Pole 2 Row Straight Surface Mounted　QSS-050-01-L-D-A

0.635 mm SMT High Speed Header - QSS/QTS Series
Surface-Mounted header single end or differential pair interconnect suitable for substrate stacking application

Samtec

Board Connection Socket QSS Series 0.635 mm 50 Pole 2 Row Straight Surface Mounted　QSS-025-01-L-D-A

0.635 mm SMT High Speed Header - QSS/QTS Series
Surface-Mounted header single end or differential pair interconnect suitable for substrate stacking application

Samtec

Ribbon Cable IDT Connector 200 mm TCSD Series　TCSD-25-D-08.00-01-N

Samtec TCSD Series 2.00mm Tiger Eye IDC Socket Ribbon Cable Assemblies
TCSD series IDC socket to socket ribbon cable assemblies consisting of a 28 AWG 7/36 stranded tinned copper wire PVC insulated ribbon cable with a 2.00mm pitch double row female socket either end with highly reliable gold plated IDC Tiger Eye contacts and polarizing notch for accurate mating

Samtec

0.635 mm Pitch 20 Pole 2 Row Straight SMT Female Card Edge Connector　MEC6-110-02-S-DV-A

Samtec 0.635mm MEC6 Series PCB Micro Edge Card Sockets
0.635mm MEC6 series PCB micro edge card sockets with standard PCB alignment pins and a double row design that accepts up to 140 gold plated contacts

Samtec

Ribbon Cable IDT Connector 203.2 mm TCSD Series　TCSD-15-D-08.00-01-N

Samtec TCSD Series 2.00mm Tiger Eye IDC Socket Ribbon Cable Assemblies
TCSD series IDC socket to socket ribbon cable assemblies consisting of a 28 AWG 7/36 stranded tinned copper wire PVC insulated ribbon cable with a 2.00mm pitch double row female socket either end with highly reliable gold plated IDC Tiger Eye contacts and polarizing notch for accurate mating

Samtec

SFP Cage SFPC Series　SFPC-SL

Transceiver interface for SFP system, Series MECT/SFPC
The SFP system (Small Form-factor Pluggable) is an interface in a popular industry format for multiple protocols The SFP system supports hot-swapping of fibre-optic and copper cable-based transceivers in the host unit

Samtec

Ribbon Cable IDT Connector 200 mm TCSD Series　TCSD-10-D-08.00-01-N

Samtec TCSD Series 2.00mm Tiger Eye IDC Socket Ribbon Cable Assemblies
TCSD series IDC socket to socket ribbon cable assemblies consisting of a 28 AWG 7/36 stranded tinned copper wire PVC insulated ribbon cable with a 2.00mm pitch double row female socket either end with highly reliable gold plated IDC Tiger Eye contacts and polarizing notch for accurate mating

Samtec

Wire-to-Substrate Cable assembly　FFSD-20-D-08.00-01-N

Samtec FFSD Series 1.27 mm Tiger Eye IDC Socket Ribbon Cable Assembly
The FFSD Series Tiger Eye IDC socket ribbon cable assembly consists of a 30 AWG 0.635 mm pitch gray ribbon cable and a 1.27 mm pitch 2 row female socket with reliable gold-plated Tiger Eye contacts and a polarization notch at one end for precise engagement.　These FFSD Series IDC flat ribbon cable socket assemblies consist of up to 50 contacts in assembly lengths of 2 to 10 inches.

Samtec

Ribbon Cable Assembly FFSD Series　FFSD-25-D-08.00-01-N

Samtec FFSD Series 1.27 mm Tiger Eye IDC Socket Ribbon Cable Assembly
The FFSD Series Tiger Eye IDC socket ribbon cable assembly consists of a 30 AWG 0.635 mm pitch gray ribbon cable and a 1.27 mm pitch 2 row female socket with reliable gold-plated Tiger Eye contacts and a polarization notch at one end for precise engagement.　These FFSD Series IDC flat ribbon cable socket assemblies consist of up to 50 contacts in assembly lengths of 2 to 10 inches.

Samtec

Ribbon Cable IDT Connector FFMD Series　FFMD-10-T-08.00-01-N

FFMD Series Cable Assembly
Cable jumper suitable for microboard-to-board interconnection with male/female IDC connectors.

Samtec

Ribbon Cable IDT Connector 8-inch TCMD Series　TCMD-25-T-08.00-01-N

TCSD Series IDC Socket Cable Assembly
Double-ended female-to-female or male-to-oscillatory assemblies (100 mm or 200 mm length) Low profile, height 5 mm (0.200 ") Wire uses 2 mm pitch, 28 awg, 7/36 stranded, PVC-insulated copper 4 finger contact optimizes normal insertion/extraction forces TCSD uses beryllium copper, 0.76 μm gold-plated contacts TCMD uses phosphor bronze, tin-plated contacts Rated current: 1 A Contact resistance: 10 mΩ (max.) Operating temperature range: -40 to +105 °C

Samtec

0.8 mm Pitch 20 Pole 2 Row Light Angle SMT Female Card Edge Connector　MECT-110-01-M-D-RA1

Transceiver interface for SFP system, Series MECT/SFPC
The SFP system (Small Form-factor Pluggable) is an interface in a popular industry format for multiple protocols The SFP system supports hot-swapping of fibre-optic and copper cable-based transceivers in the host unit

Samtec

Ribbon Cable IDT Connector FFMD Series　FFMD-20-T-08.00-01-N

FFMD Series Cable Assembly
Cable jumper suitable for microboard-to-board interconnection with male/female IDC connectors.

Samtec

Ribbon Cable IDT Connector FFMD Series　FFMD-25-T-08.00-01-N

FFMD Series Cable Assembly
Cable jumper suitable for microboard-to-board interconnection with male/female IDC connectors.

Samtec

Board Connection Header Q Strip QTS Series 50 Polar 0.635 mm 2 Row Straight　QTS-025-01-L-D-A

0.635 mm SMT High Speed Header - QSS/QTS Series
Surface-Mounted header single end or differential pair interconnect suitable for substrate stacking application

Samtec

Socket for Board Connection CLP Series 1.27 mm 10 Pole 2 Row Light Angle Surface Mounting　CLP-105-02-F-DH

Samtec

Pin Header Flex Stack TW Series 14 Polar 2 mm 2 Row Straight　TW-07-09-T-D-170-SM

Samtec

Board Connection Socket 1 mm 18 Pole 2 Row Straight Surface Mounting　MLE-109-01-G-DV-A

Samtec

Board Connection Socket SFM Series 1.27 mm 10 Pole 2 Row Straight Through Hole　SFM-105-01-S-D-A

Samtec

Board Connection Socket SMM Series 2 mm 8 Pole 2 Row Straight Surface Mount　SMM-104-02-S-D

Samtec

Board Connection Socket SMM Series 2 mm 12 Pole 2 Row Straight Surface Mounting　SMM-106-02-S-D

Samtec

Pin Header FTSH Series 20 Pole 1.27 mm 2 Row Light Angle　FTSH-110-02-L-DH

FTSH series SMT terminal strip mating: FFSD series IDC cable assembly, typical part number; See 159-880 159-880.　CLP Series Micro Socket Strip, Representative Part No.; See 481-4695 481-4695.　FLE Series Socket Strip, Representative Part Number; See 766-8959 766-8959.
Surface Mount Microheader - FTSH Series

Samtec

Board Connection Socket SFMC Series 1.27 mm 12 Pole 2 Row Straight Surface Mounted　SFMC-106-02-SM-D

Samtec

Pin Header TMS Series 26 Pole 1.27 mm 2 Row Straight　TMS-113-02-S-D

Samtec

Pin Header TMM Series 12 Pole 2 mm 1 Row Light Angle　TMM-112-01-G-S-RE

Samtec

MMCX Connector Female　GRF1-J-P-02-E-ST-TH1

Samtec interconnection board mounted MMCX jack
This is a series of connected ultra-compact MMCX circuit board mounting jacks manufactured by Samtec.　50 ohm micro connections are typically used for DC to 6 GHz communication applications.　Ideal for use with limited board space.　Snap lock design allows 360 ° rotation during engagement.　This series of MMCX connection jacks is available in a variety of straight and light angle models.　Interlock with GRF1-P MMCX Cable Assembly: Typical Part Number; 123-6824 123-6824

Samtec

MMCX Connector Female　GRF1-J-P-08-E-ST-TH1

Samtec interconnection board mounted MMCX jack
This is a series of connected ultra-compact MMCX circuit board mounting jacks manufactured by Samtec.　50 ohm micro connections are typically used for DC to 6 GHz communication applications.　Ideal for use with limited board space.　Snap lock design allows 360 ° rotation during engagement.　This series of MMCX connection jacks is available in a variety of straight and light angle models.　Interlock with GRF1-P MMCX Cable Assembly: Typical Part Number; 123-6824 123-6824

Samtec

MMCX Connector Female　GRF1-J-P-06-E-RA-TH1

Samtec interconnection board mounted MMCX jack
This is a series of connected ultra-compact MMCX circuit board mounting jacks manufactured by Samtec.　50 ohm micro connections are typically used for DC to 6 GHz communication applications.　Ideal for use with limited board space.　Snap lock design allows 360 ° rotation during engagement.　This series of MMCX connection jacks is available in a variety of straight and light angle models.　Interlock with GRF1-P MMCX Cable Assembly: Typical Part Number; 123-6824 123-6824

Samtec

MMCX Connector Female　GRF1-J-P-06-E-ST-TH1-E

Samtec interconnection board mounted MMCX jack
This is a series of connected ultra-compact MMCX circuit board mounting jacks manufactured by Samtec.　50 ohm micro connections are typically used for DC to 6 GHz communication applications.　Ideal for use with limited board space.　Snap lock design allows 360 ° rotation during engagement.　This series of MMCX connection jacks is available in a variety of straight and light angle models.　Interlock with GRF1-P MMCX Cable Assembly: Typical Part Number; 123-6824 123-6824

Samtec

MMCX Connector Male　GRF1-P-P-04-E-ST-TH1

Samtec Coupling Board Mounted MMCX Plug
This is a series of connecting ultra-compact MMCX board mounting plugs manufactured by Samtec.　50 ohm micro connections are typically used for DC to 6 GHz communication applications.　Ideal for use with limited board space.　Snap lock design allows 360 ° rotation during engagement.　This series of MMCX connecting plugs is available in a variety of straight vertical lead styles.

Samtec

MMCX Connector Male　GRF1-P-P-06-E-ST-TH1

Samtec Coupling Board Mounted MMCX Plug
This is a series of connecting ultra-compact MMCX board mounting plugs manufactured by Samtec.　50 ohm micro connections are typically used for DC to 6 GHz communication applications.　Ideal for use with limited board space.　Snap lock design allows 360 ° rotation during engagement.　This series of MMCX connecting plugs is available in a variety of straight vertical lead styles.

Samtec

Coaxial Cable RG-316 50 Ω GRF1-C　GRF1-P-C-06-0100-C1-D-S

Samtec tethered MMCX cable assembly
A series of articulated ultra-compact MMCX RF cable assemblies from Samtec.　The 50 ohm MMCX cable assembly consists of RG 316 cables with double-ended connecting plugs in a sturdy polycarbonate housing.　Captive panel screw is attached at one end.　The MMXC connection adopts a meshing design and allows 360 ° rotation during meshing.　Ideal for space-constrained applications.　Available in a variety of lengths and positions.　Connection with GRF1J Series MMCX Jack: Representative Part No. < 123-6808') 123-6808 /

Samtec

2 way ganged MMCX cable assembly 300mm　GRF1-P-C-02-0300-C1-D-S

Samtec tethered MMCX cable assembly
A series of articulated ultra-compact MMCX RF cable assemblies from Samtec.　The 50 ohm MMCX cable assembly consists of RG 316 cables with double-ended connecting plugs in a sturdy polycarbonate housing.　Captive panel screw is attached at one end.　The MMXC connection adopts a meshing design and allows 360 ° rotation during meshing.　Ideal for space-constrained applications.　Available in a variety of lengths and positions.　Connection with GRF1J Series MMCX Jack: Representative Part No. < 123-6808') 123-6808 /

Samtec

4 way ganged MMCX cable assembly 300mm　GRF1-P-C-04-0300-C1-D-S

Samtec tethered MMCX cable assembly
A series of articulated ultra-compact MMCX RF cable assemblies from Samtec.　The 50 ohm MMCX cable assembly consists of RG 316 cables with double-ended connecting plugs in a sturdy polycarbonate housing.　Captive panel screw is attached at one end.　The MMXC connection adopts a meshing design and allows 360 ° rotation during meshing.　Ideal for space-constrained applications.　Available in a variety of lengths and positions.　Connection with GRF1J Series MMCX Jack: Representative Part No. < 123-6808') 123-6808 /

Samtec

6 way ganged MMCX cable assembly 300mm　GRF1-P-C-06-0300-C1-D-S

Samtec tethered MMCX cable assembly
A series of articulated ultra-compact MMCX RF cable assemblies from Samtec.　The 50 ohm MMCX cable assembly consists of RG 316 cables with double-ended connecting plugs in a sturdy polycarbonate housing.　Captive panel screw is attached at one end.　The MMXC connection adopts a meshing design and allows 360 ° rotation during meshing.　Ideal for space-constrained applications.　Available in a variety of lengths and positions.　Connection with GRF1J Series MMCX Jack: Representative Part No. < 123-6808') 123-6808 /

Samtec

SO series PCB standoff 5 mm stack height 1 bag (5 pcs)　SO-0515-01-01-01

Samtec SO Series Precision Board Stacking Standoff
SO Series board stacking standoffs are designed for use with Samtec SI connectors.　This SO Series board standoff is made of aluminum with a rugged precision machined design and comes with standard nylon locking compound.　The standoff screws for the SO series PCB to PCB are 4 → 40 mm, and female screws/press-in (part number SO-xxxx-01-01-01) or male/female configuration (part number SO-xxxx-02-01-01-L) are available as standoffs.　This board standoff is designed to be 0.15 mm longer than the connector stack height to accommodate process changes. For example, a standoff with a body length of 5.15 mm has a stack height of 5 mm.