Samtec

Socket for Board Connection 6 Pole 2.54 mm 1 Row Through Hole　SLW-106-01-G-S

This SLW series low profile board to board socket strip engagement partner: TLW series low profile square post header: representative part number; See 765-6114 765-6114. TSM Series Square Post Header: Representative Part Number; See 765-6423 765-6423. TSW Series Square Post Header: Representative Part Number; See 767-0820 767-0820.
2.54 mm Low Profile Socket Strip with Tiger Buy Contacts - SLW Series

Samtec

Board Connection Pin Header 2 Pole 2.0 mm 1 Row　UMPS-02-05.5-G-V-S-W-TR

Designed flexibly as a two-piece system for power and signaling applications Up to 21 A per power blade 2 ~ 5 power blades (2.00 mm pitch stack height: 5 → 16 mm) Samtec high-speed connector systems include Edge Rate R, accelerate R HD, Q Strip R, Q2, Q Rate R, LP Array, SEARAY, SEARAY 0.80 mm, Razor Beam LP, Tiger Eye, Blade & Beam.

Samtec

Board Connection Pin Header 3 Pole 2.0 mm 1 Row　UMPT-03-06.5-G-VT-SM-WT-K

Designed flexibly as a two-piece system for power and signaling applications Up to 21 A per power blade 2 ~ 5 power blades (2.00 mm pitch stack height: 5 → 16 mm) Samtec high-speed connector systems include Edge Rate R, accelerate R HD, Q Strip R, Q2, Q Rate R, LP Array, SEARAY, SEARAY 0.80 mm, Razor Beam LP, Tiger Eye, Blade & Beam.

Samtec

Board Connection Pin Header 2 Pole 2.0 mm 1 Row　UMPT-02-01.5-L-V-S-W-TR

Designed flexibly as a two-piece system for power and signaling applications Up to 21 A per power blade 2 ~ 5 power blades (2.00 mm pitch stack height: 5 → 16 mm) Samtec high-speed connector systems include Edge Rate R, accelerate R HD, Q Strip R, Q2, Q Rate R, LP Array, SEARAY, SEARAY 0.80 mm, Razor Beam LP, Tiger Eye, Blade & Beam.

Samtec

Header 6 Pole 2 mm 1 Row 1 Set (425 Pieces)　TMM-106-01-T-S-SM-P-TR

Samtec TMM Series 2 mm low profile SMT headers are 6 pins per row, 1 lead style. Brushed tin on the tail. Single-Row surface-mounted tail plastic pick-and-place pad tape and reel packaging

Samtec

Socket for Board Connection 2 Pole 2.54 mm 1 Row Through Hole　SSA-102-W-G

The Samtec 2.54 mm SSA series consists of cost-effective socket strips. Comes with black PET polyester insulation and UL94 V-0 flame retardant rating. There are 2 contacts in 1 row and 0.25 μm gold plating is used for the contacts. Voltage: 1000 Vrms Insulation Resistance: 5000 mW (min.

Samtec

Header 8 Pole 2.54 mm 2 Rows 1 Bag (5 Pieces)　TSM-104-01-S-DV-007-P-TR

Samtec

Header 10 Pole 1.27 mm 2 Rows 1 Set (400 Pieces)　TFM-105-02-S-D-LC-P-TR

The Samtec TFM series has 5 positions per row, 2 lead style. The contacts are selectively gold-plated to 0.000762 mm and the tails are brushed tin plated. Packaging of 2-Row lock clip plastic pick-and-place pad tape and reel

Samtec

Header 10 Pole 2 mm 2 Row 1 Set (400 Pieces)　TMM-105-06-L-D-SM-P-TR

Samtec

Board Connection Socket 12 Pole 2.54 mm 2 Row Surface Mounting 1 Set (375 Pieces)　SSM-106-L-DV-A-K-TR

Samtec

Board Connection Socket 6 Pole 1.27 mm 1 Row Surface Mounting 1 Bag (5 Pieces)　RSM-106-02-L-S-P-TR

Samtec RSM Series 1.27 mm SMT micro sockets are 2 lead style with 6 positions per row. Selective gold plating of 0.000254 mm on the contact surface and brushed tin on the tail. Single-Row plastic pick-and-place pad tape and reel packaging

Samtec

Header 3 Pole 2.54 mm 1 Row 1 Set (325 Pieces)　TSM-103-01-LM-SV-P-TR

Samtec TSM Series 2.54 mm SMT Rectangular Post Headers have 2 positions per row and 1 lead style. This product has light contacts of 10 Au/50 Ni and brushed tin on the tail. Vertical single row positioning pin Plastic pick-and-place pad tape and reel packaging

Samtec

Header 120 Pole 0.8 mm 2 Rows 1 Set (150 Pieces)　QTE-060-03-L-D-A-K-TR

Samtec

Substrate Connection Socket 4 Pole 2.54 mm 2 Row Surface Mounting 1 Bag (5 Pieces)　SSM-102-L-DV-K-TR

The Samtec SSM Series 2.54 mm Tiger twin SMT socket has 2 pins per row. Selective gold plating of 0.000254 mm on the contact surface and brushed tin on the tail. 2-Row Vertical Polyimide Film Pick-and-Place Pad Tape and Reel Packaging

Samtec

Header 80 Pole 0.8 mm 2 Rows　QTE-040-02-F-D-A-K-TR

Samtec QTE series high-speed earthplane headers are 40 pins per 1 row, 2 lead style. Gold flash on the post and brushed tin on the tail. Single end positioning pin, polyimide film pick and place pad, tape and reel packaging completed.

Samtec

Base Strip 80 Polar 0.635 mm 2 Rows　LSS-140-02-F-DV-A-K-TR

Samtec

Board Connection Socket 16 Pole 2 mm 2 Row Through Hole Surface Mounting 1 Set (375 Pieces)　SQW-108-01-S-D-VS-A-K-TR

Samtec SQW Series 2 mm cost effective rugged sockets with 8 positions per row and 1 lead style. The contacts are selectively gold-plated to 0.000762 mm and the tails are brushed tin plated. Two rows of surface mount positioning pins Polyimide film pick and place pads Tape and reel packaging

Samtec

Board Connection Socket 22 Pole 2.54 mm 1 Row Surface Mounting 1 Set (300 Pieces)　SSM-111-L-SV-P-TR

The Samtec SSM Series 2.54 mm Tiger twin SMT socket has 11 pins in 1 row. Selective gold plating of 0.000254 mm on the contact surface and brushed tin on the tail. Packaging of vertical single row plastic pick-and-place pad tape and reel

Samtec

Socket for Board Connection 5 Pole 2 mm 1 Row Through Hole　SQT-105-01-L-S-RA

Representative part number for TMM SMT header to be engaged; See 481-4780 481-4780. For the engaged TMM through-hole header, refer to the representative part number.; See 765-6212 765-6212.
SQT Series High Durability Socket

Samtec

Substrate Connection Socket 20 Pole 0.4 mm 2 Row Surface Mounting　SS4-10-3.50-L-D-K-TR

Ultra-Fine 0.4 mm Pitch, Low Profile Socket Strip - SS4 Series
SS4 series ultra-fine 0.4 mm pitch substrate to substrate low profile 2 row socket strip. It has a slim body design with small board spacing. This SMT ultra-fine 0.4 mm pitch low profile socket strip is made of phosphor bronze with Razor Beam contacts, black LCP insulation, 0.25 μm gold plated contacts and a brushed tin plated tail, ideal for high speed and high durability applications. Equipped with a 1mm contact swipe, it is equipped as standard with a holding notch with an undercut to increase insertion and removal force during contact engagement. The height of part number SS4-xx-3.00-x-x-x-xx from the board is 3.50 mm. The height of part number SS4-xx-3.50-x-x-x-xx from the board is 4.00 mm.

Samtec

Board Connection Socket 8 Pole 4.191 mm 2 Row Through Hole 1 Bag (2 Pieces)　IPBS-104-02-T-D

Samtec

Socket for Board Connection 4 Pole 6.35 mm 1 Row Through Hole　PES-04-01-T-RA-SD

Samtec

Board Connection Socket 100 Pole 1.27 mm 2 Row Surface Mounting 1 Set (9 Pieces)　FLE-150-01-G-DV-A

Samtec

Board Connection Pin Header 120 Pole 1.27 mm 4 Rows 1 Set (100 Pieces)　SEAM-30-11.0-L-04-2-A-K-TR

The Samtec SEAM Series high-speed high-density open-pin field array Terminal has 120 pins. Polar pitch is 1.27 mm. The insulation of the black LCP and the material used for the terminals are copper alloys. Au or Sn on 50 μm "(1.27 μm) Ni is used for plating Operating temperature range: -55 to +125 °C Rated voltage: 240 V ac RoHS compliant (as of October 2022)

Samtec

Board Connection Pin Header 2.54 mm 2 Rows　IPT1-125-01-L-D-RA

Samtec

Pin Header 20 Pole 1.27 mm 2 Rows 1 Set (475 Pieces)　FTSH-110-01-L-DV-007-K-P-TR

Samtec

Pin Header 20 Pole 1.27 mm 2 Rows　FTSH-110-01-L-DV-007-K-P-TR

The Samtec FTSH-110-01-L-DV-007-K-P-TR is a microheader. The terminal is made of phosphor bronze and the insulator material used is a black liquid crystal polymer. This microheader is a long-life product with a range of standard optionsRated current: 3.4 A (per pin Operating temperature range: -55 °C to +125 °C)

Samtec

Board Connection Pin Header 5 Pole 2.54 mm 2 Rows 1 Bag (5 Pieces)　HTSS-105-01-T-DV

Samtec HTSS Series High Temperature Shroud Terminal Strip. Terminal Material Insulation Resistance -5000 M Flame Retardant Grade: UL94V-0 Operating Temperature Range: -55 → +105°C RoHS Compatible (as of October 2022) Lead-free Solder

Samtec

Board Connection Pin Header 50 Pole 0.635 mm 2 Rows　QTS-025-02-L-D-A

Samtec

Pin Header 16 Pole 1.27 mm 2 Rows　FTSH-108-04-L-DH-A-TR

Samtec

Board Connection Socket 5 Pole 2.54 mm 1 Row Through Hole 1 Set (43 Pieces)　ESQ-105-24-G-S

Samtec

Board Connection Pin Header 0.64 mm 2 Rows　LSS-150-02-L-DV-A

Samtec

Pin Header 12 Pole 2.54 mm 1 Row 1 Bag (5 Pieces)　BBL-112-T-F

Samtec

Board Connection Pin Header 0.64 mm 2 Rows 1 Bag (2 Pieces)　LSS-110-03-F-DV-A

Samtec

Terminal Strip 26 Pole 5 mm 4 Rows 1 Set (56 pcs)　MPTC-01-24-01-01-01-L-RA-LC

Samtec

Jumper OS Straight White Jumper 2 Pole 1 Row 2.54 mm Pitch 1 Bag (50 Pieces)　JL-250-25-T

Samtec

Pin Header 5 Pole 2.54 mm 1 Row 1 Set (46 Pieces)　TSM-105-04-T-SV

The Samtec TSM series is a surface mount Terminal strip. The insulating material used is a black liquid crystal polymer. The terminals are made of phosphor bronze. There are five contacts in total. Plating method: Au or Sn over 50 μm "(1.27 μm) Ni Operating temperature range: -55 °C to +105 °C, -55 °C to +125 °C with tin gold RoHS compliant (as of October 2022)

Samtec

Header 6 Pole 2 mm 1 Row 1 Bag (10 Pieces)　TMM-106-01-T-S-SM-P-TR

Samtec

Substrate Connection Socket 6 Pole 1.27 mm 2 Row Surface Mounting 1 Bag (1000 Pieces)　CLP-103-02-G-D-BE

Samtec

Board Connection Pin Header 2.0 mm 2 Rows 1 Set (13 Pieces)　LTMM-120-02-L-D-RA

2 The Samtec LTMM series is a shrouded board header. Can be used for blind engagement up to 50 pins. Provides both through-hole and surface-mount terminationsOrientation: Vertical, Right Angle