TP GIKEN

ชนิดกล่องตัวทดสอบ Sag (Drooping Tester) JIS Standard 140 x 40 x 30 มม.

TP GIKEN

หลายโปรแกรมประยุกต์ (ความกว้างของการรวมข้อมูลที่ 50 มม.)

TP GIKEN

การทดสอบการแยกส่วนของนกพิราบ ตัวทดสอบ 500 x 420 x 650 มม.　TP-035

This machine has been developed as a dispersion comparison test machine that is closest to the dispersion principle of Eyeliter sand grind mill.
Pigments, vehicles, and glass beads are prepared in a glass tube, tightly stoppered, and loaded into the unit. When horizontal motion is applied in the longitudinal direction of the tube, the dispersion effect is exerted by the movement and vibration of the glass bead.

TP GIKEN

Tester ต่อต้านการขยายตัวของทาเบอร์ 515 x 310 x 360 มม.　TP-152

This machine is used to measure the degree of wear of surface treatment materials such as coating and plating, plastics, rubber, decorative plywood, fibers, and other materials.

TP GIKEN

Washing Tester (2 Racks) 480 x 650 x 720 มม.　TP-153

It is an excellent testing machine that performs cleaning resistance tests on paint coatings, plastics, floor materials, and other materials and is manufactured in accordance with JIS standards and the Gardner system.
The specimen surface is reciprocated at constant speed by the prescribed brush to observe the condition of feeding the specimen.

TP GIKEN

Film Testing Machine 400 x 350 x 600 มม.　TP-154

This machine measures the friction durability of marker pens for metal coatings and stationery by rubbing them with gauze, felt, sand eraser, etc.

TP GIKEN

Erichsen Test Machine 240 x 480 x 300 มม.　TP-180

This unit measures the coating strength of a painted surface.
The specimen set in the specimen holder is fastened and fixed with a die, and the punch is extruded from the back of the film surface.

TP GIKEN

แผ่นดูด 160 x 260 x 50 มม.　TP-201

When the applicator, sag tester, etc., is used to create a constant thickness coating film, the purpose of this system is to create a constant coating film by sucking and adhering the test specimen onto the plate (float glass) to maintain smooth contact.

TP GIKEN

โปรแกรมประยุกต์สําหรับภาพยนตร์อัตโนมัติ (ชนิดนี้ใช้เป็นบาร์โค้ดด้วย) 940 x 540 x 300 มม.　TP-202

This is a test machine that performs optimum coating tests on sheets of paper, metal, film, etc., by setting the coating speed with an applicator or bar coater.

TP GIKEN

ชนิด JIS ไม่มีเวลาเบิกสินค้า Tester 450 x 400 x 400 มม.　TP-250

This machine measures the drying time of traffic paint. It rolls the machine on the painted surface at a constant speed (passing through the paint film for 1 second) and checks whether the paint film has adhered to the tire of the test roll.
Use the traffic applicator to create a 150 mm wide coating film. Test the film 15 minutes after 1 type, 10 minutes after 2 types, and 3 types after 3 minutes to check for adhesion and reference the no-pickup time.

TP GIKEN

เครื่องทดสอบสแคตช์ดินสอ (ชนิดด้วยตนเอง) 150 (130) x 80 x 65 มม.　TP-260

This is a manual pencil scratching tester manufactured in accordance with JIS K-5600 and equipped with the function of a pencil scratching tester.
The hardness and adhesion strength of the coating film are measured by the hardness of the pencil that scratches when the paint or varnish is scratched with a pencil held at a load of 750 g and an angle of 45 degrees.

TP GIKEN

เครื่องทดสอบเอนดูแรนซ์แบบแห้ง　TP-261

It is used for a pass/fail test to determine whether a single coating or multilayer coating system of a paint or related product has reached a cured dry state after a specified drying time has elapsed.
It can also be used to measure the time it takes to reach the cured dry state.

TP GIKEN

ฟอร์ดคัพ สตีลเลส 200 x 180 x 280 มม.　TP-304

This device fills a cup with a sample of paint, varnish, etc., and measures the viscosity easily and quickly by grinding the surface tension with the attached glass plate and the flow time from a fixed orifice.

TP GIKEN

เส้นผ่านศูนย์กลาง ISO Flow Coup 3มม. 108mL

TP GIKEN

ซาห์น-วิสโคซิตี้คัพ โน1 ออริฟฟิค ดีเมียเตอร์ 2.0 มม.

TP GIKEN

สตอร์เมอร์วีสคูมิเตอร์ 210 x 210 x 415 มม.　TP-330

Viscosity of paint in a 500 ml sample can is measured in seconds of 100 revolutions by the resistance value of the accurately finished rotor blade.
This is a test machine that measures the time and calculates the KU value by determining the head so that the rotor rotates 100 times in about 30 seconds.

TP GIKEN

แสดงถึง แรงดึงดูด 50mL 45φ x 45 มม.

TP GIKEN

JIS Moisture-Permeable Cup 410 x 250 x 200 มม.　TP-415

This unit is used to measure the moisture permeability of plastic paper, tarpaulin paper, and other packaging materials.

TP GIKEN

วิธีหลักกลไกทดสอบ Flex

TP GIKEN

［เลิกผลิตแล้ว］ชนิด RC การใช้ฟิล์มประเภทแห้ง ชนิดเครื่องมือวัดความแห้ง I (ตัวบันทึกการทําความแห้ง) 240 x 500 x 110 มม.