[NS TOOL Co., Ltd.]การเจาะรหัสคาร์ไบด์
ตัวกรอง
- ตามกลุ่มผลิตภัณฑ์
- ตามผลิตภัณฑ์
เรียงลําดับตาม:
-
การเจาะดูข้อมูล NISSIN Carbide (การประมวลผลความแข็งแกร่งสูง, MSDH, 0.1 x 1) MSDH 0.1X1
Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.1พบ ผลิตภัณฑ์
JPY: 11,025
USD: 68.60
-
การเจาะดูข้อมูล NISSIN Carbide (การประมวลผลความแข็งแกร่งสูง, MSDH, 0.2 x 2) MSDH 0.2X2
Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.1พบ ผลิตภัณฑ์
JPY: 10,275
USD: 63.93
-
การเจาะดูข้อมูล NISSIN Carbide (การประมวลผลความแข็งแกร่งสูง, MSDH, 0.25 x 2.5) MSDH 0.25X2.5
Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.1พบ ผลิตภัณฑ์
JPY: 10,275
USD: 63.93
-
การเจาะดูข้อมูล NISSIN Carbide (การประมวลผลความแข็งแกร่งสูง, MSDH, 0.3 x 3) MSDH 0.3X3
Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.1พบ ผลิตภัณฑ์
JPY: 9,450
USD: 58.80
-
การเจาะดูข้อมูล NISSIN Carbide (การประมวลผลความแข็งแกร่งสูง, MSDH, 0.35 x 3.5) MSDH 0.35X3.5
Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.1พบ ผลิตภัณฑ์
JPY: 9,450
USD: 58.80
-
การเจาะดูข้อมูล NISSIN Carbide (การประมวลผลความแข็งแกร่งสูง, MSDH, 0.4 x 4) MSDH 0.4X4
Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.1พบ ผลิตภัณฑ์
JPY: 7,575
USD: 47.13
-
การเจาะดูข้อมูล NISSIN Carbide (การประมวลผลความแข็งแกร่งสูง, MSDH, 0.45 x 4.5) MSDH 0.45X4.5
Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.1พบ ผลิตภัณฑ์
JPY: 7,575
USD: 47.13
-
การเจาะดูข้อมูล NISSIN Carbide (Small, Hardness Processing, MSDH, 0.5 x 5) MSDH 0.5X5
Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.1พบ ผลิตภัณฑ์
JPY: 6,675
USD: 41.53
-
การเจาะดูข้อมูล NISSIN Carbide (การประมวลผลความแข็งแกร่งสูง, MSDH, 0.55 x 5.5) MSDH 0.55X5.5
Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.1พบ ผลิตภัณฑ์
JPY: 6,675
USD: 41.53
-
การเจาะดูข้อมูล NISSIN Carbide (การประมวลผลความแข็งแกร่งสูง, MSDH, 0.6 x 6) MSDH 0.6X6
Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.1พบ ผลิตภัณฑ์
JPY: 6,150
USD: 38.27
-
การเจาะดูข้อมูล NISSIN Carbide (การประมวลผลความแข็งแกร่งสูง, MSDH, 0.65 x 6.5) MSDH 0.65X6.5
Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.1พบ ผลิตภัณฑ์
JPY: 6,150
USD: 38.27
-
การเจาะดูข้อมูล NISSIN Carbide (การประมวลผลความแข็งแกร่งสูง, MSDH, 0.7 x 7) MSDH 0.7X7
Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.1พบ ผลิตภัณฑ์
JPY: 5,700
USD: 35.47
-
การเจาะดูข้อมูล NISSIN Carbide (การประมวลผลความแข็งแกร่งสูง, MSDH, 0.75 x 7.5) MSDH 0.75X7.5
Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.1พบ ผลิตภัณฑ์
JPY: 5,700
USD: 35.47
-
การเจาะดูข้อมูล NISSIN Carbide (การประมวลผลความแข็งแกร่งสูง, MSDH, 0.8 x 8) MSDH 0.8X8
Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.1พบ ผลิตภัณฑ์
JPY: 5,325
USD: 33.13
-
การเจาะดูข้อมูล NISSIN Carbide (การประมวลผลความแข็งแกร่งสูง, MSDH, 0.85 x 8.5) MSDH 0.85X8.5
Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.1พบ ผลิตภัณฑ์
JPY: 5,325
USD: 33.13
-
การเจาะดูข้อมูล NISSIN Carbide (การประมวลผลความแข็งแกร่งสูง, MSDH, 0.9 x 9) MSDH 0.9X9
Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.1พบ ผลิตภัณฑ์
JPY: 5,100
USD: 31.73
-
การเจาะดูข้อมูล NISSIN Carbide (การประมวลผลความแข็งแกร่งสูง, MSDH, 0.95 x 9.5) MSDH 0.95X9.5
Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.1พบ ผลิตภัณฑ์
JPY: 5,100
USD: 31.73
-
การเจาะดูข้อมูล NISSIN Carbide (Small, Hardness Processing, MSDH และ Φ1 x 10) MSDH 1X10
Hole-drilling on quenched steel 65HRC is possible with a small diameter drill.
It has a hole diameter with little variation and a stable long life.1พบ ผลิตภัณฑ์
JPY: 4,725
USD: 29.40
-
NISSIN Carbide Micro-Drill (Mugen Microarchitecture, NSMD-MS Φ0.01 0.06) NSMD-MS-0.01X0.06
Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.1พบ ผลิตภัณฑ์
JPY: 39,225
USD: 244.06
-
NISSIN Carbide Micro-Drill (Mugen Microarchitecture, NSMD-MS Φ0.015 0.09) NSMD-MS-0.015X0.09
Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.1พบ ผลิตภัณฑ์
JPY: 39,225
USD: 244.06
-
NISSIN Carbide Micro-Drill (Mugen Microarchitecture, NSMD-MS Φ0.02 0.12) NSMD-MS-0.02X0.12
Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.1พบ ผลิตภัณฑ์
JPY: 26,175
USD: 162.86
-
NISSIN Carbide Micro-Drill (Mugen Microarchitecture, NSMD-MS Φ0.025 0.15) NSMD-MS-0.025X0.15
Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.1พบ ผลิตภัณฑ์
JPY: 26,175
USD: 162.86
-
NISSIN Carbide Micro-Drill (Mugen Microarchitecture, NSMD-MS Φ0.03 0.18) NSMD-MS-0.03X0.18
Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.1พบ ผลิตภัณฑ์
JPY: 20,100
USD: 125.06
-
NISSIN Carbide Micro-Drill (Mugen Microarchitecture, NSMD-MS Φ0.035 0.24) NSMD-MS-0.035X0.24
Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.1พบ ผลิตภัณฑ์
JPY: 20,100
USD: 125.06
-
NISSIN Carbide Micro-Drill (Mugen Microarchitecture, NSMD-MS Φ0.045 0.3) NSMD-MS-0.045X0.3
Short type with 6D groove length using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.1พบ ผลิตภัณฑ์
JPY: 15,375
USD: 95.66
-
NISSIN Carbide Micro-Drill (Mugen Microarchitecture, NSMD-ΜΦ0.01 x 0.1) NSMD-M-0.01X0.1
A standard type with a groove length of 10D using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.1พบ ผลิตภัณฑ์
JPY: 46,050
USD: 286.52
-
NISSIN Carbide Micro-Drill (Mugen Microarchitecture, NSMD-ΜΦ0.015 x 0.15) NSMD-M-0.015X0.15
A standard type with a groove length of 10D using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.1พบ ผลิตภัณฑ์
JPY: 46,050
USD: 286.52
-
NISSIN Carbide Micro-Drill (Mugen Microarchitecture, NSMD-ΜΦ0.02 x 0.2) NSMD-M-0.02X0.2
A standard type with a groove length of 10D using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.1พบ ผลิตภัณฑ์
JPY: 36,825
USD: 229.13
-
NISSIN Carbide Micro-Drill (Mugen Microarchitecture, NSMD-ΜΦ0.025 x 0.25) NSMD-M-0.025X0.25
A standard type with a groove length of 10D using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.1พบ ผลิตภัณฑ์
JPY: 36,825
USD: 229.13
-
NISSIN Carbide Micro-Drill (Mugen Microarchitecture, NSMD-ΜΦ0.03 x 0.3) NSMD-M-0.03X0.3
A standard type with a groove length of 10D using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.1พบ ผลิตภัณฑ์
JPY: 21,525
USD: 133.93
-
NISSIN Carbide Micro-Drill (Mugen Microarchitecture, NSMD-ΜΦ0.035 x 0.4) NSMD-M-0.035X0.4
A standard type with a groove length of 10D using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.1พบ ผลิตภัณฑ์
JPY: 21,525
USD: 133.93
-
NISSIN Carbide Micro-Drill (Mugen Microarchitecture, NSMD-ΜΦ0.04 x 0.4) NSMD-M-0.04X0.4
A standard type with a groove length of 10D using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.1พบ ผลิตภัณฑ์
JPY: 14,550
USD: 90.53
-
NISSIN Carbide Micro-Drill (Mugen Microarchitecture, NSMD-ΜΦ0.045 x 0.5) NSMD-M-0.045X0.5
A standard type with a groove length of 10D using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.1พบ ผลิตภัณฑ์
JPY: 14,550
USD: 90.53
-
NISSIN Carbide Micro-Drill (Mugen Microarchitecture, NSMD-ΜΦ0.05 x 0.5) NSMD-M-0.05X0.5
A standard type with a groove length of 10D using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.1พบ ผลิตภัณฑ์
JPY: 11,625
USD: 72.33
-
NISSIN Carbide Micro-Drill (Mugen Microarchitecture, NSMD-ΜΦ0.055 x 0.6) NSMD-M-0.055X0.6
A standard type with a groove length of 10D using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.1พบ ผลิตภัณฑ์
JPY: 11,625
USD: 72.33
-
NISSIN Carbide Micro-Drill (Mugen Microarchitecture, NSMD-ΜΦ0.06 x 0.6) NSMD-M-0.06X0.6
A standard type with a groove length of 10D using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.1พบ ผลิตภัณฑ์
JPY: 10,650
USD: 66.26
-
NISSIN Carbide Micro-Drill (Mugen Microarchitecture, NSMD-ΜΦ0.065 x 0.7) NSMD-M-0.065X0.7
A standard type with a groove length of 10D using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.1พบ ผลิตภัณฑ์
JPY: 10,650
USD: 66.26
-
NISSIN Carbide Micro-Drill (Mugen Microarchitecture, NSMD-ΜΦ0.07 x 0.7) NSMD-M-0.07X0.7
A standard type with a groove length of 10D using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.1พบ ผลิตภัณฑ์
JPY: 8,475
USD: 52.73
-
NISSIN Carbide Micro-Drill (Mugen Microarchitecture, NSMD-ΜΦ0.085 x 0.9) NSMD-M-0.085X0.9
A standard type with a groove length of 10D using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.1พบ ผลิตภัณฑ์
JPY: 5,700
USD: 35.47
-
NISSIN Carbide Micro-Drill (Mugen Microarchitecture, NSMD-ΜΦ0.09 x 0.9) NSMD-M-0.09X0.9
A standard type with a groove length of 10D using infinite micro coating.
The use of a thin film coating exclusively for microdrilling provides excellent performance in drilling stainless steel and other steel materials.1พบ ผลิตภัณฑ์
JPY: 5,700
USD: 35.47
