ASAHI ENGINEERING Co., Ltd.

สโมสรวอลเลย์บอลวิบรา-ไทเทต-เวียด-3　1081

Coated parts can be stored indefinitely until use.
After application, the dried screw can be used in water.

ASAHI ENGINEERING Co., Ltd.

ตะเก็บไม่ตั้งค่า　0892

It is a non-solidifying liquid gasket that can be used for any fluid including fuel.
Since it does not harden, the assembly time is unlimited and it is easy to remove.

ASAHI ENGINEERING Co., Ltd.

การซ่อมแซมคอนกรีต

ASAHI ENGINEERING Co., Ltd.

อุณหภูมิสูง 460 อุณหภูมิ - ท่อเหล็กไร้สนิม　0921

Compatible with high pressure of 68 MPa. A versatile anaerobic sealant that hardens by blocking air with excellent vibration, chemical and heat resistance.
Water, oil, air, gas, sprinklers, indoor and outdoor hydrants, water supply and drainage, refrigerants, oiling heat media, kerosene, antifreeze piping, etc.

ASAHI ENGINEERING Co., Ltd.

อุณหภูมิสูง 460 อุณหภูมิ - ท่อเหล็กไร้สนิม　0941

Use when you want to increase the curing speed of metal piping sealant.
For piping above 65 A.

ASAHI ENGINEERING Co., Ltd.

การยึดเข้ากับโปรแกรมแก้ไขด่วน2　1019

Holes, cracks and chips can be easily and strongly repaired.
If you pour liquid (polymer liquid adhesive) and powder (welding powder) on it, it will cure in about 10 seconds (24 hours if secondary processing is required).

ASAHI ENGINEERING Co., Ltd.

ชุดซ่อมพลาสติก

ASAHI ENGINEERING Co., Ltd.

ชุดซ่อมพลาสติก　1036

This is a repair kit that allows you to easily and quickly perform adhesive fill-in-the-hole plating.
Various materials such as radiators, headlamp units, bumpers and fuel tanks can be repaired.

ASAHI ENGINEERING Co., Ltd.

ชุดซ่อมพลาสติก

ASAHI ENGINEERING Co., Ltd.

ชุดซ่อมพลาสติก　1034

This is a repair kit that allows you to easily and quickly perform adhesive fill-in-the-hole plating.
Various materials such as radiators, headlamp units, bumpers and fuel tanks can be repaired.

ASAHI ENGINEERING Co., Ltd.

ชุดซ่อมพลาสติก　1035

PRK Primer is a pretreatment agent for hard-to-adhere materials that can strongly adhere hard-to-adhere materials such as polypropylene (PP), EPDM, polyacetal (POM), and soft PVC (SPVC) in a short time.
Various materials such as radiators, headlamp units, bumpers and fuel tanks can be repaired.

ASAHI ENGINEERING Co., Ltd.

การยึดเข้ากับโปรแกรมแก้ไขด่วน2　1067

ASAHI ENGINEERING Co., Ltd.

การยึดเข้ากับโปรแกรมแก้ไขด่วน2　1069

ASAHI ENGINEERING Co., Ltd.

ซ่อมแซมหลายชุด　1161

It does not require any special equipment or technology, just by mixing the main agent and the curing agent, it can be cured like a metal, and it can be easily filled in the hole, filled in the nest, plated, glued and repaired.
After complete curing, holes, threads, polishing, painting, etc. can be added, and since it is an electrically defective conductor, electrical corrosion does not occur even when repair between dissimilar metals is performed.

ASAHI ENGINEERING Co., Ltd.

［เลิกผลิตแล้ว］สําหรับความร้อนสูง แพตตี้ ฮีท เมทัล　1022

This product is a multi-purpose epoxy putty that hardens like metal just by cutting, kneading and sticking, and can easily repair cracks and holes in an emergency.
Can be used for most materials such as metal, plastic, ceramic, stone, PVC, FRP, concrete, etc.

ASAHI ENGINEERING Co., Ltd.

［เลิกผลิตแล้ว］ประเภทการรักษาใต้น้ําแบบแพตตี้ วอเตอร์ เมทัล　1024

It is a multi-purpose epoxy putty that hardens like a metal just by cutting, kneading and sticking, and can easily repair cracks and holes in an emergency.
Can be used for most materials such as metal, plastic, ceramic, stone, PVC, FRP, concrete, etc.

ASAHI ENGINEERING Co., Ltd.

［เลิกผลิตแล้ว］ซีเมนต์ผักคอ　1026

It has a heat resistance of 650°C and is suitable for repairing high-temperature parts.
Does not contain solvents or asbestos, does not burn even if a fire is brought close to it, and adheres well to materials such as metal, mortar and brick.

ASAHI ENGINEERING Co., Ltd.

［เลิกผลิตแล้ว］ซ่อมแซมหลายชุด　1028

It is a multi-purpose epoxy putty that hardens like a metal just by cutting, kneading and sticking, and can easily repair cracks and holes in an emergency.
Can be used for most materials such as metal, plastic, ceramic, stone, PVC, FRP, concrete, etc.

ASAHI ENGINEERING Co., Ltd.

［เลิกผลิตแล้ว］ตึกระบาด

ASAHI ENGINEERING Co., Ltd.

［เลิกผลิตแล้ว］พุทธโลหะเบา　1027

It is a multi-purpose epoxy putty that hardens like a metal just by cutting, kneading and sticking, and can easily repair cracks and holes in an emergency.
Can be used for most materials such as metal, plastic, ceramic, stone, PVC, FRP, concrete, etc.

ASAHI ENGINEERING Co., Ltd.

［เลิกผลิตแล้ว］ตะเก็บไม่ตั้งค่า　0893

It is a non-solidifying liquid gasket that can be used for any fluid including fuel.
Since it does not harden, the assembly time is unlimited and it is easy to remove.

ASAHI ENGINEERING Co., Ltd.

［เลิกผลิตแล้ว］ตึกระบาด

ASAHI ENGINEERING Co., Ltd.

［เลิกผลิตแล้ว］ชุดซ่อมพลาสติก　1033

It is a repair kit that can easily and inexpensively and quickly perform adhesive fill-in-the-hole plating.
Various materials such as radiators, headlamp units, bumpers and fuel tanks can be repaired.