YUKO Corporation

#SC180

YUKO Corporation

แปรงขนาดเล็ก

YUKO Corporation

ไนลอน บรัช

YUKO Corporation

#AO240 ปี 10 0

YUKO Corporation

Flex horn #AO180 BC4 0　BC-40AO180

YUKO Corporation

#SC320 ปี 64 0　BC-640SC320

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

หมวกหมด, เครื่องดูดฝุ่นปั๊ม

YUKO Corporation

บรัช (แปรงลวดเหล็กกล้า)　81-A-0.6

Industrial manual super fine wire brush.
Use this product to remove burrs in cross holes of φ12 or less which cannot be covered by flex horn ®.

YUKO Corporation

บรัช (แปรงลวดเหล็กกล้า)　81-A-0.8

Industrial manual super fine wire brush.
Use this product to remove burrs in cross holes of φ12 or less which cannot be covered by flex horn ®.

YUKO Corporation

มิเนเจอร์ บรัช 81-AY Inc. (แปลกจังหวะ ไนลอน บรัช)　81-AY-0.8

Ultra-fine nylon brush with abrasive grains.
It is attached to a drill and used with a right rotation of 1000rpm or less.

YUKO Corporation

บรัช (แปรงลวดเหล็กกล้า)　81-B-10.0

Industrial manual super fine wire brush.
Use this product to remove burrs in cross holes of φ12 or less which cannot be covered by flex horn ®.

YUKO Corporation

บรัช (แปรงลวดเหล็กกล้า)　81-B-11.0

Industrial manual super fine wire brush.
Use this product to remove burrs in cross holes of φ12 or less which cannot be covered by flex horn ®.

YUKO Corporation

บรัช (แปรงลวดเหล็กกล้า)　81-B-12.0

Industrial manual super fine wire brush.
Use this product to remove burrs in cross holes of φ12 or less which cannot be covered by flex horn ®.

YUKO Corporation

บรัช (แปรงลวดเหล็กกล้า)　81-B-7.0

Industrial manual super fine wire brush.
Use this product to remove burrs in cross holes of φ12 or less which cannot be covered by flex horn ®.

YUKO Corporation

บรัช (แปรงลวดเหล็กกล้า)　81-B-8.0

Industrial manual super fine wire brush.
Use this product to remove burrs in cross holes of φ12 or less which cannot be covered by flex horn ®.

YUKO Corporation

บรัช (แปรงลวดเหล็กกล้า)　81-B-9.0

Industrial manual super fine wire brush.
Use this product to remove burrs in cross holes of φ12 or less which cannot be covered by flex horn ®.

YUKO Corporation

มิเนเจอร์ บรัช (แปลกใหม่)　81-BY-10.0

Ultra-fine nylon brush with abrasive grains.
It is attached to a drill and used with a right rotation of 1000rpm or less.

YUKO Corporation

มิเนเจอร์ บรัช (แปลกใหม่)　81-BY-11.0

Ultra-fine nylon brush with abrasive grains.
It is attached to a drill and used with a right rotation of 1000rpm or less.

YUKO Corporation

มิเนเจอร์ บรัช (แปลกใหม่)　81-BY-12.0

Ultra-fine nylon brush with abrasive grains.
It is attached to a drill and used with a right rotation of 1000rpm or less.

YUKO Corporation

มิเนเจอร์ บรัช (แปลกใหม่)　81-BY-7.0

Ultra-fine nylon brush with abrasive grains.
It is attached to a drill and used with a right rotation of 1000rpm or less.

YUKO Corporation

มิเนเจอร์ บรัช (แปลกใหม่)　81-BY-8.0

Ultra-fine nylon brush with abrasive grains.
It is attached to a drill and used with a right rotation of 1000rpm or less.

YUKO Corporation

มิเนเจอร์ บรัช (แปลกใหม่)　81-BY-9.0

Ultra-fine nylon brush with abrasive grains.
It is attached to a drill and used with a right rotation of 1000rpm or less.

YUKO Corporation

#SC600　BC-10.0 SC600

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

#SC60　BC-11.0 SC60

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

#AO60 AO60　BC-12.0 AO60

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

#AO180 AO18　BC-12.7 AO180

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

#AO600 AO60　BC-12.7 AO600

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

#SC600　BC-18.0 SC600

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

#AO120 AO12　BC-19.0 AO120

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

#SC600　BC-19.0 SC600

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

#AO320 AO32　BC-22.0 AO320

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

#SC120 12　BC-23.8 SC120

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

#AO240 AO24　BC-25.4 AO240

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

#SC60　BC-29.0 SC60

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

#SC320　BC-35.0 SC320

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

#SC60　BC-35.0 SC60

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

#SC180 18　BC-4.5 SC180

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

#SC320　BC-41.0 SC320

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

#AO240 AO24　BC-5.0 AO240

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

#AO120 AO12　BC-51.0 AO120

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.