[DIJET INDUSTRIAL Co., Ltd.]เครื่องมือเจาะ
ตัวกรอง
- ตามกลุ่มผลิตภัณฑ์
- ตามผลิตภัณฑ์
เรียงลําดับตาม:
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 3 x Blade Leagh 12mm) TLDM030
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 6,190
USD: 38.80
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 3.1 x ความยาวของเบลด 12 มม.) TLDM031
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 6,560
USD: 41.12
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 3.2 x ความยาวเบลด 12 มม.) TLDM032
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 6,560
USD: 41.12
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 3.3 x ความยาวเบลด 13 มม.) TLDM033
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 6,560
USD: 41.12
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 3.4 x ความยาวเบลด 13 มม.) TLDM034
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 6,560
USD: 41.12
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 3.5 x ความยาวเบลด 13 มม.) TLDM035
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 6,560
USD: 41.12
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 3.6 x ความยาวเบลด 14mm) TLDM036
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 6,810
USD: 42.69
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 3.7 x ความยาวเบลด 14 มม.) TLDM037
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 6,810
USD: 42.69
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 3.8 x ความยาวของเบลด 15mm) TLDM038
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 6,810
USD: 42.69
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 3.9 x ความยาวของเบลด 15mm) TLDM039
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 6,810
USD: 42.69
-
สว่านรวม Carbide (Flat Drill, DZ Coated TiAlN, Blade Diameter 4 x Blade ความยาว 15mm) TLDM040
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 6,810
USD: 42.69
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 4.1 x ความยาวเบลด 16mm) TLDM041
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 7,310
USD: 45.82
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 4.2 x ความยาวเบลด 16mm) TLDM042
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 7,310
USD: 45.82
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 4.3 x ความยาวเบลด 17 มม.) TLDM043
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 7,310
USD: 45.82
-
สว่านรวม Carbide (Flat Drill, DZ Coated TiAlN, Blade Diameter 4.4 x ความยาวของเบลด 17 มม.) TLDM044
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 7,310
USD: 45.82
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 4.5 x ความยาวของเบลด 17 มม.) TLDM045
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 7,310
USD: 45.82
-
สว่านรวม Carbide (Flat Drill, DZ Coated TiAlN, Blade Diameter 4.6 x ความยาวของเบลด 18mm) TLDM046
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 7,930
USD: 49.71
-
สว่านรวม Carbide (Flat Drill, DZ Coated TiAlN, Blade Diameter 4.7 x ความยาวของเบลด 18mm) TLDM047
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 7,930
USD: 49.71
-
สว่านรวม Carbide (Flat Drill, DZ Coated TiAlN, Blade Diameter 4.8 x ความยาวของเบลด 18mm) TLDM048
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 7,930
USD: 49.71
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 4.9 x ความยาวเบลด 19 มม.) TLDM049
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 7,930
USD: 49.71
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 5 x Blade Langth 19mm) TLDM050
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 7,930
USD: 49.71
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 5.1 x ความยาวเบลด 20mm) TLDM051
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 8,430
USD: 52.84
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 5.2 x ความยาวเบลด 20 มม.) TLDM052
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 8,430
USD: 52.84
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 5.3 x ความยาวเบลด 20 มม.) TLDM053
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 8,430
USD: 52.84
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 5.4 x ความยาวของเบลด 21 มม.) TLDM054
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 8,430
USD: 52.84
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 5.5 x ความยาวเบลด 21 มม.) TLDM055
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 8,430
USD: 52.84
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 5.6 x ความยาวเบลด 22 มม.) TLDM056
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 9,030
USD: 56.60
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 5.7 x ความยาวเบลด 22 มม.) TLDM057
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 9,030
USD: 56.60
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 5.8 x ความยาวของเบลด 22 มม.) TLDM058
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 9,030
USD: 56.60
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 5.9 x ความยาวเบลด 23 มม.) TLDM059
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 9,030
USD: 56.60
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 6 x Blade Length 23m) TLDM060
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 8,460
USD: 53.03
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 6.1 x ความยาวเบลด 23 มม.) TLDM061
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 9,410
USD: 58.99
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 6.2 x ความยาว Blade 24mm) TLDM062
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 9,410
USD: 58.99
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 6.3 x ความยาว Blade 24mm) TLDM063
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 9,410
USD: 58.99
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 6.4 x ความยาวของเบลด 25 มม.) TLDM064
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 9,410
USD: 58.99
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 6.5 x ความยาวเบลด 25 มม.) TLDM065
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 9,410
USD: 58.99
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 6.6 x ความยาวเบลด 25 มม.) TLDM066
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 9,990
USD: 62.62
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 6.7 x ความยาวเบลด 26 มม.) TLDM067
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 9,990
USD: 62.62
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 6.8 x ความยาวเบลด 26 มม.) TLDM068
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 9,990
USD: 62.62
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade Diameter 6.9 x ความยาวของเบลด 27 มม.) TLDM069
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1พบ ผลิตภัณฑ์
JPY: 9,990
USD: 62.62
