[SANDVIK K.K.]เครื่องมือตัด
ตัวกรอง
- ตามกลุ่มผลิตภัณฑ์
- ตามผลิตภัณฑ์
เรียงลําดับตาม:
-
Coroturn 111 Turning Positive Tip (120) 5015 1 Set (10 Pieces) CPMT060204PM
Constructed cutting edge and excellent resistance to plastic deformation.
For general turning steel.1พบ ผลิตภัณฑ์
JPY: 13,200
USD: 82.80
-
Coroturn 111 Turning Positive Tip (130) 1125 1 Set (10 Pieces) CPMT060204UM
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 14,540
USD: 91.21
-
Coroturn 111 Turning Positive Tip (130) 1515 1 Set (10 Pieces) CPMT060204UM
Suitable for cases where excellent machined surface roughness and sharp cutting edge are required.
Excellent impact resistance for light cutting and intermittent machining.1พบ ผลิตภัณฑ์
JPY: 14,540
USD: 91.21
-
Coroturn 111 Turning Positive Tip (120) 3225 1 Set (10 Pieces) CPMT060208KM
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 14,450
USD: 90.64
-
Coroturn 111 Turning Positive Tip (120) 2025 1 Set (10 Pieces) CPMT060208MM
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 13,960
USD: 87.57
-
Coroturn 111 Turning Positive Tip (130) 1125 1 Set (10 Pieces) CPMT060208UM
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 14,540
USD: 91.21
-
Coroturn 111 Turning Positive Tip (120) 1125 1 Set (10 Pieces) CPMT09T302MF
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 19,540
USD: 122.57
-
Coroturn 111 Turning Positive Tip (130) 1125 1 Set (10 Pieces) CPMT09T302UM
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 19,540
USD: 122.57
-
Coroturn 111 Turning Positive Tip (130) 1515 1 Set (10 Pieces) CPMT09T302UM
Suitable for cases where excellent machined surface roughness and sharp cutting edge are required.
Excellent impact resistance for light cutting and intermittent machining.1พบ ผลิตภัณฑ์
JPY: 19,540
USD: 122.57
-
Coroturn 111 Turning Positive Tip (120) 1125 1 Set (10 Pieces) CPMT09T304MF
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 16,940
USD: 106.26
-
Coroturn 111 Turning Positive Tip (120) 2015 1 Set (10 Pieces) CPMT09T304MF
First recommended material type for continuous cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 16,180
USD: 101.49
-
Coroturn 111 Turning Positive Tip (120) 1125 1 Set (10 Pieces) CPMT09T304MM
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 16,940
USD: 106.26
-
Coroturn 111 Turning Positive Tip (120) 2025 1 Set (10 Pieces) CPMT09T304MM
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 16,180
USD: 101.49
-
Coroturn 111 Turning Positive Tip (130) 1125 1 Set (10 Pieces) CPMT09T304UM
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 16,940
USD: 106.26
-
Coroturn 111 Turning Positive Tip (120) 1125 1 Set (10 Pieces) CPMT09T308MF
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 16,940
USD: 106.26
-
Coroturn 111 Turning Positive Tip (120) 1125 1 Set (10 Pieces) CPMT09T308MM
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 16,940
USD: 106.26
-
Coroturn 111 Turning Positive Tip (120) 2015 1 Set (10 Pieces) CPMT09T308MM
First recommended material type for continuous cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 16,180
USD: 101.49
-
Coroturn 111 Turning Positive Tip (120) 2025 1 Set (10 Pieces) CPMT09T308MM
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 16,180
USD: 101.49
-
Coroturn 111 Turning Positive Tip (130) 1125 1 Set (10 Pieces) CPMT09T308UM
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 16,940
USD: 106.26
-
Coroturn 111 Turning Positive Tip (130) 1515 1 Set (10 Pieces) CPMT09T308UM
Suitable for cases where excellent machined surface roughness and sharp cutting edge are required.
Excellent impact resistance for light cutting and intermittent machining.1พบ ผลิตภัณฑ์
JPY: 16,940
USD: 106.26
-
Coroturn 111 Turning Positive Tip (130) H 13 A1 Set (10 Pieces) CPMT09T308UM
Excellent wear resistance and toughness.
For general turning cast iron and non-ferrous metal processing.1พบ ผลิตภัณฑ์
JPY: 12,340
USD: 77.41
-
T-MaxP Shank Tool (210) CRDNN2525M06ID
Square shank holder for solid CBN chip.
For turning of high hardness work material.1พบ ผลิตภัณฑ์
JPY: 24,700
USD: 154.94
-
T-MaxP Shank Tool (210) CRDNN3225P1203ID
Coolant can be supplied from the upper and lower directions of the scoop surface and the flank surface.
High-precision coolant improves chip treatment, increases tool life and cutting conditions.1พบ ผลิตภัณฑ์
JPY: 24,700
USD: 154.94
-
T-MaxP Shank Tool (210) CRSNL2525M06ID
Square shank holder for solid CBN chip.
For turning of high hardness work material.1พบ ผลิตภัณฑ์
JPY: 24,700
USD: 154.94
-
T-MaxP Shank Tool (210) CRSNL3225P1203ID
Square shank holder for solid CBN chip.
For turning of high hardness work material.1พบ ผลิตภัณฑ์
JPY: 24,700
USD: 154.94
-
T-MaxP Shank Tool (210) CRSNR2525M06ID
Square shank holder for solid CBN chip.
For turning of high hardness work material.1พบ ผลิตภัณฑ์
JPY: 24,700
USD: 154.94
-
T-MaxP Shank Tool (210) CRSNR3225P1203ID
Square shank holder for solid CBN chip.
For turning of high hardness work material.1พบ ผลิตภัณฑ์
JPY: 24,700
USD: 154.94
-
Coroturn XS Insert Bar (325) 1025 CXS04T098A084230R
Sandvic Corotern XS Insert Bar (325) 1025
1พบ ผลิตภัณฑ์
JPY: 10,720
USD: 67.24
-
Coroturn 107 Turning Positive Tip (130) 1105 1 Set (10 Pieces) DCET070200UM
Sharp cutting blade with high machining performance and high toughness.
Suitable for finishing stainless steel at high cutting speed.1พบ ผลิตภัณฑ์
JPY: 28,690
USD: 179.97
-
Coroturn 107 Turning Positive Tip (130) 1115 1 Set (10 Pieces) DCET070200UM
Sharp cutting blade and adhesion to ultrafine particle base material, high high temperature hardness and excellent plastic deformation combined with excellent cutting blade reliability.
Achieved uniform surface wear and high machining performance.1พบ ผลิตภัณฑ์
JPY: 28,690
USD: 179.97
-
Coroturn 107 Turning Positive Tip (130) 1125 1 Set (10 Pieces) DCET070200UM
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 28,690
USD: 179.97
-
Coroturn 107 Turning Positive Tip (130) 1105 1 Set (10 Pieces) DCET070201UM
Sharp cutting blade with high machining performance and high toughness.
Suitable for finishing stainless steel at high cutting speed.1พบ ผลิตภัณฑ์
JPY: 28,690
USD: 179.97
-
Coroturn 107 Turning Positive Tip (130) 1115 1 Set (10 Pieces) DCET070201UM
Sharp cutting blade and adhesion to ultrafine particle base material, high high temperature hardness and excellent plastic deformation combined with excellent cutting blade reliability.
Achieved uniform surface wear and high machining performance.1พบ ผลิตภัณฑ์
JPY: 28,690
USD: 179.97
-
Coroturn 107 Turning Positive Tip (130) 1125 1 Set (10 Pieces) DCET070201UM
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 28,690
USD: 179.97
-
Coroturn 107 Turning Positive Tip (130) 1105 1 Set (10 Pieces) DCET11T301UM
Sharp cutting blade with high machining performance and high toughness.
Suitable for finishing stainless steel at high cutting speed.1พบ ผลิตภัณฑ์
JPY: 38,310
USD: 240.31
-
Coroturn 107 Turning Positive Tip (130) 1115 1 Set (10 Pieces) DCET11T301UM
Sharp cutting blade and adhesion to ultrafine particle base material, high high temperature hardness and excellent plastic deformation combined with excellent cutting blade reliability.
Achieved uniform surface wear and high machining performance.1พบ ผลิตภัณฑ์
JPY: 38,310
USD: 240.31
-
Coroturn 107 Turning Positive Tip (130) 1125 1 Set (10 Pieces) DCET11T301UM
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 38,310
USD: 240.31
-
Coroturn 107 Turning Positive Tip (130) 1105 1 Set (10 Pieces) DCET11T302UM
Sharp cutting blade with high machining performance and high toughness.
Suitable for finishing stainless steel at high cutting speed.1พบ ผลิตภัณฑ์
JPY: 38,310
USD: 240.31
-
Coroturn 107 Turning Positive Tip (130) 1115 1 Set (10 Pieces) DCET11T302UM
Sharp cutting blade and adhesion to ultrafine particle base material, high high temperature hardness and excellent plastic deformation combined with excellent cutting blade reliability.
Achieved uniform surface wear and high machining performance.1พบ ผลิตภัณฑ์
JPY: 38,310
USD: 240.31
-
Coroturn 107 Turning Positive Tip (130) 1125 1 Set (10 Pieces) DCET11T302UM
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 38,310
USD: 240.31
