[SANDVIK K.K.]เครื่องมือตัด
ตัวกรอง
- ตามกลุ่มผลิตภัณฑ์
- ตามผลิตภัณฑ์
เรียงลําดับตาม:
-
Negative Tips for T-Max P Turning (110) 3210 1 Set (10 Pieces) CNMU120412KM
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 20,040
USD: 125.71
-
Negative Tips for T-Max P Turning (110) 3210 1 Set (10 Pieces) CNMU120612KM
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 21,760
USD: 136.50
-
Negative Tips for T-Max P Turning (110) 1105 1 Set (10 Pieces) CNMX1204A1SM
Sharp cutting blade with high machining performance and high toughness.
Suitable for finishing stainless steel at high cutting speed.1พบ ผลิตภัณฑ์
JPY: 23,300
USD: 146.16
-
Negative Tips for T-Max P Turning (110) S05F1 Set (10 Pieces) CNMX1204A1SM
Can also be used for high-speed finishing of heat-resistant alloys, low-speed long-time machining, and rough machining.
For general rotation-resistant alloy additions.1พบ ผลิตภัณฑ์
JPY: 24,260
USD: 152.18
-
Negative Tips for T-Max P Turning (110) 1105 1 Set (10 Pieces) CNMX1204A2SM
Sharp cutting blade with high machining performance and high toughness.
Suitable for finishing stainless steel at high cutting speed.1พบ ผลิตภัณฑ์
JPY: 23,300
USD: 146.16
-
Negative Tips for T-Max P Turning (110) 2015 1 Set (10 Pieces) CNMX1204A2SM
First recommended material type for continuous cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 22,240
USD: 139.51
-
Negative Tips for T-Max P Turning (110) H 13 A1 Set (10 Pieces) CNMX1204A2SM
Excellent wear resistance and toughness.
For general turning cast iron and non-ferrous metal processing.1พบ ผลิตภัณฑ์
JPY: 16,850
USD: 105.70
-
Negative Tips for T-Max P Turning (110) S05F1 Set (10 Pieces) CNMX1204A2SM
Can also be used for high-speed finishing of heat-resistant alloys, low-speed long-time machining, and rough machining.
For general rotation-resistant alloy additions.1พบ ผลิตภัณฑ์
JPY: 24,260
USD: 152.18
-
Negative Tips for T-Max P Turning (340) 4325 1 Set (5 Pieces) CNMX191140PF
The first recommended material type for steel turning.
Excellent chip discharge performance for both continuous and intermittent machining.1พบ ผลิตภัณฑ์
JPY: 30,620
USD: 192.07
-
Coroturn Prime Tip for Turning (312) 1115 1 Set (5 Pieces) CPA1104L5
It is an innovative tool that can perform all machining of outer diameter, end face, and wetness, enabling not only conventional turning but also significantly high feed machining in prime turning.
With a high feed rate of up to 1.2 mm/rev, we have achieved an average of 1.5 times higher production processing and an average of 2 times longer chip life.1พบ ผลิตภัณฑ์
JPY: 19,600
USD: 122.95
-
Coroturn Prime Tip for Turning (312) 2025 1 Set (5 Pieces) CPA1104L5
It is an innovative tool that can perform all machining of outer diameter, end face, and wetness, enabling not only conventional turning but also significantly high feed machining in prime turning.
With a high feed rate of up to 1.2 mm/rev, we have achieved an average of 1.5 times higher production processing and an average of 2 times longer chip life.1พบ ผลิตภัณฑ์
JPY: 20,000
USD: 125.46
-
Coroturn Prime Tip for Turning (312) 4415 1 Set (5 Pieces) CPA1104L5
It is an innovative tool that can perform all machining of outer diameter, end face, and wetness, enabling not only conventional turning but also significantly high feed machining in prime turning.
With a high feed rate of up to 1.2 mm/rev, we have achieved an average of 1.5 times higher production processing and an average of 2 times longer chip life.1พบ ผลิตภัณฑ์
JPY: 22,500
USD: 141.14
-
Coroturn Prime Tip for Turning (312) 4425 1 Set (5 Pieces) CPA1104L5
It is an innovative tool that can perform all machining of outer diameter, end face, and wetness, enabling not only conventional turning but also significantly high feed machining in prime turning.
With a high feed rate of up to 1.2 mm/rev, we have achieved an average of 1.5 times higher production processing and an average of 2 times longer chip life.1พบ ผลิตภัณฑ์
JPY: 20,900
USD: 131.10
-
Coroturn Prime Tip for Turning (312) 1115 1 Set (5 Pieces) CPA1108L3
It is an innovative tool that can perform all machining of outer diameter, end face, and wetness, enabling not only conventional turning but also significantly high feed machining in prime turning.
With a high feed rate of up to 1.2 mm/rev, we have achieved an average of 1.5 times higher production processing and an average of 2 times longer chip life.1พบ ผลิตภัณฑ์
JPY: 21,100
USD: 132.36
-
Coroturn Prime Tip for Turning (312) 4415 1 Set (5 Pieces) CPA1108L3
It is an innovative tool that can perform all machining of outer diameter, end face, and wetness, enabling not only conventional turning but also significantly high feed machining in prime turning.
With a high feed rate of up to 1.2 mm/rev, we have achieved an average of 1.5 times higher production processing and an average of 2 times longer chip life.1พบ ผลิตภัณฑ์
JPY: 22,500
USD: 141.14
-
Coroturn Prime Tip for Turning (312) 4425 1 Set (5 Pieces) CPA1108L3
It is an innovative tool that can perform all machining of outer diameter, end face, and wetness, enabling not only conventional turning but also significantly high feed machining in prime turning.
With a high feed rate of up to 1.2 mm/rev, we have achieved an average of 1.5 times higher production processing and an average of 2 times longer chip life.1พบ ผลิตภัณฑ์
JPY: 20,900
USD: 131.10
-
Coroturn Prime Tip for Turning (312) H 13 A1 Set (5 Pieces) CPA1108L3
It is an innovative tool that can perform all machining of outer diameter, end face, and wetness, enabling not only conventional turning but also significantly high feed machining in prime turning.
With a high feed rate of up to 1.2 mm/rev, we have achieved an average of 1.5 times higher production processing and an average of 2 times longer chip life.1พบ ผลิตภัณฑ์
JPY: 14,300
USD: 89.70
-
Coroturn Prime Tip for Turning (312) 4415 1 Set (5 Pieces) CPA1108L3WX
It is an innovative tool that can perform all machining of outer diameter, end face, and wetness, enabling not only conventional turning but also significantly high feed machining in prime turning.
With a high feed rate of up to 1.2 mm/rev, we have achieved an average of 1.5 times higher production processing and an average of 2 times longer chip life.1พบ ผลิตภัณฑ์
JPY: 25,800
USD: 161.84
-
Coroturn Prime Tip for Turning (312) 4425 1 Set (5 Pieces) CPA1108L3WX
It is an innovative tool that can perform all machining of outer diameter, end face, and wetness, enabling not only conventional turning but also significantly high feed machining in prime turning.
With a high feed rate of up to 1.2 mm/rev, we have achieved an average of 1.5 times higher production processing and an average of 2 times longer chip life.1พบ ผลิตภัณฑ์
JPY: 24,000
USD: 150.55
-
Coroturn Prime Tip for Turning (312) 1115 1 Set (5 Pieces) CPA1108L5
It is an innovative tool that can perform all machining of outer diameter, end face, and wetness, enabling not only conventional turning but also significantly high feed machining in prime turning.
With a high feed rate of up to 1.2 mm/rev, we have achieved an average of 1.5 times higher production processing and an average of 2 times longer chip life.1พบ ผลิตภัณฑ์
JPY: 19,600
USD: 122.95
-
Coroturn Prime Tip for Turning (312) 2025 1 Set (5 Pieces) CPA1108L5
It is an innovative tool that can perform all machining of outer diameter, end face, and wetness, enabling not only conventional turning but also significantly high feed machining in prime turning.
With a high feed rate of up to 1.2 mm/rev, we have achieved an average of 1.5 times higher production processing and an average of 2 times longer chip life.1พบ ผลิตภัณฑ์
JPY: 20,000
USD: 125.46
-
Coroturn Prime Tip for Turning (312) 4415 1 Set (5 Pieces) CPA1108L5
It is an innovative tool that can perform all machining of outer diameter, end face, and wetness, enabling not only conventional turning but also significantly high feed machining in prime turning.
With a high feed rate of up to 1.2 mm/rev, we have achieved an average of 1.5 times higher production processing and an average of 2 times longer chip life.1พบ ผลิตภัณฑ์
JPY: 22,500
USD: 141.14
-
Coroturn Prime Tip for Turning (312) 4425 1 Set (5 Pieces) CPA1108L5
It is an innovative tool that can perform all machining of outer diameter, end face, and wetness, enabling not only conventional turning but also significantly high feed machining in prime turning.
With a high feed rate of up to 1.2 mm/rev, we have achieved an average of 1.5 times higher production processing and an average of 2 times longer chip life.1พบ ผลิตภัณฑ์
JPY: 20,900
USD: 131.10
-
Coroturn Prime Tip for Turning (312) 1115 1 Set (5 Pieces) CPA1108L5W
It is an innovative tool that can perform all machining of outer diameter, end face, and wetness, enabling not only conventional turning but also significantly high feed machining in prime turning.
With a high feed rate of up to 1.2 mm/rev, we have achieved an average of 1.5 times higher production processing and an average of 2 times longer chip life.1พบ ผลิตภัณฑ์
JPY: 22,600
USD: 141.76
-
Coroturn Prime Tip for Turning (312) 2025 1 Set (5 Pieces) CPA1108L5W
It is an innovative tool that can perform all machining of outer diameter, end face, and wetness, enabling not only conventional turning but also significantly high feed machining in prime turning.
With a high feed rate of up to 1.2 mm/rev, we have achieved an average of 1.5 times higher production processing and an average of 2 times longer chip life.1พบ ผลิตภัณฑ์
JPY: 22,900
USD: 143.65
-
Coroturn Prime Tip for Turning (312) 4415 1 Set (5 Pieces) CPA1108L5W
It is an innovative tool that can perform all machining of outer diameter, end face, and wetness, enabling not only conventional turning but also significantly high feed machining in prime turning.
With a high feed rate of up to 1.2 mm/rev, we have achieved an average of 1.5 times higher production processing and an average of 2 times longer chip life.1พบ ผลิตภัณฑ์
JPY: 25,800
USD: 161.84
-
Coroturn Prime Tip for Turning (312) 4425 1 Set (5 Pieces) CPA1108L5W
It is an innovative tool that can perform all machining of outer diameter, end face, and wetness, enabling not only conventional turning but also significantly high feed machining in prime turning.
With a high feed rate of up to 1.2 mm/rev, we have achieved an average of 1.5 times higher production processing and an average of 2 times longer chip life.1พบ ผลิตภัณฑ์
JPY: 24,000
USD: 150.55
-
Coroturn Prime Tip for Turning (312) 4425 1 Set (5 Pieces) CPB1108H3
It is an innovative tool that can perform all machining of outer diameter, end face, and wetness, enabling not only conventional turning but also significantly high feed machining in prime turning.
With a high feed rate of up to 1.2 mm/rev, we have achieved an average of 1.5 times higher production processing and an average of 2 times longer chip life.1พบ ผลิตภัณฑ์
JPY: 20,900
USD: 131.10
-
Coroturn 111 Turning Positive Tip (120) 1125 1 Set (10 Pieces) CPMT060202MF
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 16,650
USD: 104.44
-
Coroturn 111 Turning Positive Tip (120) 1515 1 Set (10 Pieces) CPMT060202PF
Suitable for cases where excellent machined surface roughness and sharp cutting edge are required.
Excellent impact resistance for light cutting and intermittent machining.1พบ ผลิตภัณฑ์
JPY: 16,650
USD: 104.44
-
Coroturn 111 Turning Positive Tip (120) 5015 1 Set (10 Pieces) CPMT060202PF
Constructed cutting edge and excellent resistance to plastic deformation.
For general turning steel.1พบ ผลิตภัณฑ์
JPY: 15,210
USD: 95.41
-
Coroturn 111 Turning Positive Tip (120) 3210 1 Set (10 Pieces) CPMT060204KF
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 14,450
USD: 90.64
-
Coroturn 111 Turning Positive Tip (120) 3225 1 Set (10 Pieces) CPMT060204KF
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 14,450
USD: 90.64
-
Coroturn 111 Turning Positive Tip (120) H 13 A1 Set (10 Pieces) CPMT060204KM
Excellent wear resistance and toughness.
For general turning cast iron and non-ferrous metal processing.1พบ ผลิตภัณฑ์
JPY: 10,690
USD: 67.06
-
Coroturn 111 Turning Positive Tip (120) 1125 1 Set (10 Pieces) CPMT060204MF
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 14,540
USD: 91.21
-
Coroturn 111 Turning Positive Tip (120) 2015 1 Set (10 Pieces) CPMT060204MF
First recommended material type for continuous cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 13,960
USD: 87.57
-
Coroturn 111 Turning Positive Tip (120) 2025 1 Set (10 Pieces) CPMT060204MF
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 13,960
USD: 87.57
-
Coroturn 111 Turning Positive Tip (120) 2025 1 Set (10 Pieces) CPMT060204MM
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 13,960
USD: 87.57
-
Coroturn 111 Turning Positive Tip (120) 2035 1 Set (10 Pieces) CPMT060204MM
Excellent heat-resistant shock resistance, for high-speed intermittent machining.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 13,590
USD: 85.25
-
Coroturn 111 Turning Positive Tip (120) 5015 1 Set (10 Pieces) CPMT060204PF
Constructed cutting edge and excellent resistance to plastic deformation.
For general turning steel.1พบ ผลิตภัณฑ์
JPY: 13,200
USD: 82.80
