[SANDVIK K.K.]เครื่องมือตัด
ตัวกรอง
- ตามกลุ่มผลิตภัณฑ์
- ตามผลิตภัณฑ์
เรียงลําดับตาม:
-
Negative Tips for T-Max P Turning (110) 2025 1 Set (10 Pieces) CNMG190608MM
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 42,650
USD: 267.53
-
Negative Tips for T-Max P Turning (110) 2035 1 Set (10 Pieces) CNMG190608MM
Excellent heat-resistant shock resistance, for high-speed intermittent machining.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 41,590
USD: 260.88
-
Negative Tips for T-Max P Turning (112) 2220 1 Set (10 Pieces) CNMG190608MM
Suitable for machining austenitic and duplex stainless steels.
Suitable for both wet and dry.1พบ ผลิตภัณฑ์
JPY: 43,990
USD: 275.94
-
Negative Tips for T-Max P Turning (110) 235 1 Set (10 Pieces) CNMG190608MR
It is a material type with high toughness and edge strength.
Ideal for low speed intermittent machining.1พบ ผลิตภัณฑ์
JPY: 40,430
USD: 253.61
-
Negative Tips for T-Max P Turning (112) 4335 1 Set (10 Pieces) CNMG190608PM
Coating material type for steel and cast steel in unstable working condition.
High cutting edge reliability and excellent chip discharge in intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 45,830
USD: 287.48
-
Negative Tips for T-Max P Turning (112) 4335 1 Set (10 Pieces) CNMG190608PR
Coating material type for steel and cast steel in unstable working condition.
High cutting edge reliability and excellent chip discharge in intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 45,830
USD: 287.48
-
Negative Tips for T-Max P Turning (110) 235 1 Set (10 Pieces) CNMG190608QM
It is a material type with high toughness and edge strength.
Ideal for low speed intermittent machining.1พบ ผลิตภัณฑ์
JPY: 40,430
USD: 253.61
-
Negative Tips for T-Max P Turning (112) 4335 1 Set (10 Pieces) CNMG190608QM
Coating material type for steel and cast steel in unstable working condition.
High cutting edge reliability and excellent chip discharge in intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 45,830
USD: 287.48
-
Negative Tips for T-Max P Turning (110) 1105 1 Set (10 Pieces) CNMG190608SM
Sharp cutting blade with high machining performance and high toughness.
Suitable for finishing stainless steel at high cutting speed.1พบ ผลิตภัณฑ์
JPY: 44,580
USD: 279.64
-
Negative Tips for T-Max P Turning (110) 1115 1 Set (10 Pieces) CNMG190608SM
Sharp cutting blade and adhesion to ultrafine particle base material, high high temperature hardness and excellent plastic deformation combined with excellent cutting blade reliability.
Achieved uniform surface wear and high machining performance.1พบ ผลิตภัณฑ์
JPY: 44,580
USD: 279.64
-
Negative Tips for T-Max P Turning (110) 1125 1 Set (10 Pieces) CNMG190608SM
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 44,580
USD: 279.64
-
Negative Tips for T-Max P Turning (110) H 13 A1 Set (10 Pieces) CNMG190608SM
Excellent wear resistance and toughness.
For general turning cast iron and non-ferrous metal processing.1พบ ผลิตภัณฑ์
JPY: 32,350
USD: 202.92
-
Negative Tips for T-Max P Turning (110) 2025 1 Set (10 Pieces) CNMG190612HM
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 42,650
USD: 267.53
-
Negative Tips for T-Max P Turning (112) 4335 1 Set (10 Pieces) CNMG190612HM
Coating material type for steel and cast steel in unstable working condition.
High cutting edge reliability and excellent chip discharge in intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 45,830
USD: 287.48
-
Negative Tips for T-Max P Turning (110) 3205 1 Set (10 Pieces) CNMG190612KM
CVD coated carbide type for outer diameter and general inner diameter machining of small parts.
For general turning cast iron processing.1พบ ผลิตภัณฑ์
JPY: 44,560
USD: 279.51
-
Negative Tips for T-Max P Turning (110) 3210 1 Set (10 Pieces) CNMG190612KM
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 44,090
USD: 276.57
-
Negative Tips for T-Max P Turning (110) 3225 1 Set (10 Pieces) CNMG190612KM
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 44,090
USD: 276.57
-
Negative Tips for T-Max P Turning (110) 3210 1 Set (10 Pieces) CNMG190612KR
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 44,090
USD: 276.57
-
Negative Tips for T-Max P Turning (110) 3225 1 Set (10 Pieces) CNMG190612KR
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 44,090
USD: 276.57
-
Negative Tips for T-Max P Turning (110) 2015 1 Set (10 Pieces) CNMG190612MM
First recommended material type for continuous cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 42,650
USD: 267.53
-
Negative Tips for T-Max P Turning (110) 2025 1 Set (10 Pieces) CNMG190612MM
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 42,650
USD: 267.53
-
Negative Tips for T-Max P Turning (110) 2035 1 Set (10 Pieces) CNMG190612MM
Excellent heat-resistant shock resistance, for high-speed intermittent machining.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 41,590
USD: 260.88
-
Negative Tips for T-Max P Turning (112) 2220 1 Set (10 Pieces) CNMG190612MM
Suitable for machining austenitic and duplex stainless steels.
Suitable for both wet and dry.1พบ ผลิตภัณฑ์
JPY: 43,990
USD: 275.94
-
Negative Tips for T-Max P Turning (110) 2015 1 Set (10 Pieces) CNMG190612MR
First recommended material type for continuous cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 42,650
USD: 267.53
-
Negative Tips for T-Max P Turning (110) 2025 1 Set (10 Pieces) CNMG190612MR
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 42,650
USD: 267.53
-
Negative Tips for T-Max P Turning (110) 2035 1 Set (10 Pieces) CNMG190612MR
Excellent heat-resistant shock resistance, for high-speed intermittent machining.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 41,590
USD: 260.88
-
Negative Tips for T-Max P Turning (112) 2220 1 Set (10 Pieces) CNMG190612MR
Suitable for machining austenitic and duplex stainless steels.
Suitable for both wet and dry.1พบ ผลิตภัณฑ์
JPY: 43,990
USD: 275.94
-
Negative Tips for T-Max P Turning (110) 235 1 Set (10 Pieces) CNMG190612MR
It is a material type with high toughness and edge strength.
Ideal for low speed intermittent machining.1พบ ผลิตภัณฑ์
JPY: 40,430
USD: 253.61
-
Negative Tips for T-Max P Turning (112) 4335 1 Set (10 Pieces) CNMG190612MR
Coating material type for steel and cast steel in unstable working condition.
High cutting edge reliability and excellent chip discharge in intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 45,830
USD: 287.48
-
Negative Tips for T-Max P Turning (110) 2025 1 Set (10 Pieces) CNMG190612MRR
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 42,650
USD: 267.53
-
Negative Tips for T-Max P Turning (110) 2035 1 Set (10 Pieces) CNMG190612MRR
Excellent heat-resistant shock resistance, for high-speed intermittent machining.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 41,590
USD: 260.88
-
Negative Tips for T-Max P Turning (112) 4335 1 Set (10 Pieces) CNMG190612PM
Coating material type for steel and cast steel in unstable working condition.
High cutting edge reliability and excellent chip discharge in intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 45,830
USD: 287.48
-
Negative Tips for T-Max P Turning (112) 4335 1 Set (10 Pieces) CNMG190612PR
Coating material type for steel and cast steel in unstable working condition.
High cutting edge reliability and excellent chip discharge in intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 45,830
USD: 287.48
-
Negative Tips for T-Max P Turning (110) 1105 1 Set (10 Pieces) CNMG190612QM
Sharp cutting blade with high machining performance and high toughness.
Suitable for finishing stainless steel at high cutting speed.1พบ ผลิตภัณฑ์
JPY: 44,580
USD: 279.64
-
Negative Tips for T-Max P Turning (110) 1115 1 Set (10 Pieces) CNMG190612QM
Sharp cutting blade and adhesion to ultrafine particle base material, high high temperature hardness and excellent plastic deformation combined with excellent cutting blade reliability.
Achieved uniform surface wear and high machining performance.1พบ ผลิตภัณฑ์
JPY: 44,580
USD: 279.64
-
Negative Tips for T-Max P Turning (110) 2025 1 Set (10 Pieces) CNMG190612QM
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 42,650
USD: 267.53
-
Negative Tips for T-Max P Turning (110) 235 1 Set (10 Pieces) CNMG190612QM
It is a material type with high toughness and edge strength.
Ideal for low speed intermittent machining.1พบ ผลิตภัณฑ์
JPY: 40,430
USD: 253.61
-
Negative Tips for T-Max P Turning (112) 4335 1 Set (10 Pieces) CNMG190612QM
Coating material type for steel and cast steel in unstable working condition.
High cutting edge reliability and excellent chip discharge in intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 45,830
USD: 287.48
-
Negative Tips for T-Max P Turning (110) H 13 A1 Set (10 Pieces) CNMG190612QM
Excellent wear resistance and toughness.
For general turning cast iron and non-ferrous metal processing.1พบ ผลิตภัณฑ์
JPY: 32,350
USD: 202.92
-
Negative Tips for T-Max P Turning (110) 1105 1 Set (10 Pieces) CNMG190612SM
Sharp cutting blade with high machining performance and high toughness.
Suitable for finishing stainless steel at high cutting speed.1พบ ผลิตภัณฑ์
JPY: 44,580
USD: 279.64
