[SANDVIK K.K.]เครื่องมือตัด
ตัวกรอง
- ตามกลุ่มผลิตภัณฑ์
- ตามผลิตภัณฑ์
เรียงลําดับตาม:
-
Negative Tips for T-Max P Turning (110) 2015 1 Set (10 Pieces) CNMG160612WMX
First recommended material type for continuous cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 35,040
USD: 219.80
-
Negative Tips for T-Max P Turning (110) 3225 1 Set (10 Pieces) CNMG160612WMX
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 36,300
USD: 227.70
-
Negative Tips for T-Max P Turning (112) 4335 1 Set (10 Pieces) CNMG160612WMX
Coating material type for steel and cast steel in unstable working condition.
High cutting edge reliability and excellent chip discharge in intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 37,740
USD: 236.73
-
Negative Tips for T-Max P Turning (112) 2220 1 Set (10 Pieces) CNMG160612XMR
Suitable for machining austenitic and duplex stainless steels.
Suitable for both wet and dry.1พบ ผลิตภัณฑ์
JPY: 31,390
USD: 196.90
-
Negative Tips for T-Max P Turning (110) GC 15 1 Set (10 Pieces) CNMG160612XMR
Precision grade coated carbide chip for mixed workpiece outer diameter and general inner diameter machining.
For mixed work processing.1พบ ผลิตภัณฑ์
JPY: 31,860
USD: 199.85
-
Negative Tips for T-Max P Turning (110) GC 30 1 Set (10 Pieces) CNMG160612XMR
Precision grade coated carbide chip for mixed workpiece outer diameter and general inner diameter machining.
For mixed work processing.1พบ ผลิตภัณฑ์
JPY: 31,860
USD: 199.85
-
Negative Tips for T-Max P Turning (110) 2025 1 Set (10 Pieces) CNMG160616HM
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 30,530
USD: 191.51
-
Negative Tips for T-Max P Turning (112) 4335 1 Set (10 Pieces) CNMG160616HM
Coating material type for steel and cast steel in unstable working condition.
High cutting edge reliability and excellent chip discharge in intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 32,740
USD: 205.37
-
Negative Tips for T-Max P Turning (110) 3205 1 Set (10 Pieces) CNMG160616KM
CVD coated carbide type for outer diameter and general inner diameter machining of small parts.
For general turning cast iron processing.1พบ ผลิตภัณฑ์
JPY: 31,860
USD: 199.85
-
Negative Tips for T-Max P Turning (110) 3210 1 Set (10 Pieces) CNMG160616KM
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 31,580
USD: 198.09
-
Negative Tips for T-Max P Turning (110) 3225 1 Set (10 Pieces) CNMG160616KM
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 31,580
USD: 198.09
-
Negative Tips for T-Max P Turning (110) 3210 1 Set (10 Pieces) CNMG160616KR
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 31,580
USD: 198.09
-
Negative Tips for T-Max P Turning (110) 3225 1 Set (10 Pieces) CNMG160616KR
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 31,580
USD: 198.09
-
Negative Tips for T-Max P Turning (110) 3210 1 Set (10 Pieces) CNMG160616KRR
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 31,580
USD: 198.09
-
Negative Tips for T-Max P Turning (110) 2025 1 Set (10 Pieces) CNMG160616MM
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 30,530
USD: 191.51
-
Negative Tips for T-Max P Turning (110) 2035 1 Set (10 Pieces) CNMG160616MM
Excellent heat-resistant shock resistance, for high-speed intermittent machining.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 29,750
USD: 186.61
-
Negative Tips for T-Max P Turning (112) 2220 1 Set (10 Pieces) CNMG160616MM
Suitable for machining austenitic and duplex stainless steels.
Suitable for both wet and dry.1พบ ผลิตภัณฑ์
JPY: 31,390
USD: 196.90
-
Negative Tips for T-Max P Turning (110) 2015 1 Set (10 Pieces) CNMG160616MR
First recommended material type for continuous cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 30,530
USD: 191.51
-
Negative Tips for T-Max P Turning (110) 2025 1 Set (10 Pieces) CNMG160616MR
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 30,530
USD: 191.51
-
Negative Tips for T-Max P Turning (110) 2035 1 Set (10 Pieces) CNMG160616MR
Excellent heat-resistant shock resistance, for high-speed intermittent machining.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 29,750
USD: 186.61
-
Negative Tips for T-Max P Turning (112) 2220 1 Set (10 Pieces) CNMG160616MR
Suitable for machining austenitic and duplex stainless steels.
Suitable for both wet and dry.1พบ ผลิตภัณฑ์
JPY: 31,390
USD: 196.90
-
Negative Tips for T-Max P Turning (112) 4335 1 Set (10 Pieces) CNMG160616MR
Coating material type for steel and cast steel in unstable working condition.
High cutting edge reliability and excellent chip discharge in intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 32,740
USD: 205.37
-
Negative Tips for T-Max P Turning (110) 1115 1 Set (10 Pieces) CNMG160616MRR
Sharp cutting blade and adhesion to ultrafine particle base material, high high temperature hardness and excellent plastic deformation combined with excellent cutting blade reliability.
Achieved uniform surface wear and high machining performance.1พบ ผลิตภัณฑ์
JPY: 31,860
USD: 199.85
-
Negative Tips for T-Max P Turning (110) 2025 1 Set (10 Pieces) CNMG160616MRR
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 30,530
USD: 191.51
-
Negative Tips for T-Max P Turning (110) 2035 1 Set (10 Pieces) CNMG160616MRR
Excellent heat-resistant shock resistance, for high-speed intermittent machining.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 29,750
USD: 186.61
-
Negative Tips for T-Max P Turning (112) 2220 1 Set (10 Pieces) CNMG160616MRR
Suitable for machining austenitic and duplex stainless steels.
Suitable for both wet and dry.1พบ ผลิตภัณฑ์
JPY: 31,390
USD: 196.90
-
Negative Tips for T-Max P Turning (112) 4335 1 Set (10 Pieces) CNMG160616PM
Coating material type for steel and cast steel in unstable working condition.
High cutting edge reliability and excellent chip discharge in intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 32,740
USD: 205.37
-
Negative Tips for T-Max P Turning (112) 4335 1 Set (10 Pieces) CNMG160616PR
Coating material type for steel and cast steel in unstable working condition.
High cutting edge reliability and excellent chip discharge in intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 32,740
USD: 205.37
-
Negative Tips for T-Max P Turning (110) 1105 1 Set (10 Pieces) CNMG160616SM
Sharp cutting blade with high machining performance and high toughness.
Suitable for finishing stainless steel at high cutting speed.1พบ ผลิตภัณฑ์
JPY: 31,860
USD: 199.85
-
Negative Tips for T-Max P Turning (110) 1115 1 Set (10 Pieces) CNMG160616SM
Sharp cutting blade and adhesion to ultrafine particle base material, high high temperature hardness and excellent plastic deformation combined with excellent cutting blade reliability.
Achieved uniform surface wear and high machining performance.1พบ ผลิตภัณฑ์
JPY: 31,860
USD: 199.85
-
Negative Tips for T-Max P Turning (110) H 13 A1 Set (10 Pieces) CNMG160616SM
Excellent wear resistance and toughness.
For general turning cast iron and non-ferrous metal processing.1พบ ผลิตภัณฑ์
JPY: 23,210
USD: 145.59
-
Negative Tips for T-Max P Turning (110) S05F1 Set (10 Pieces) CNMG160616SM
Can also be used for high-speed finishing of heat-resistant alloys, low-speed long-time machining, and rough machining.
For general rotation-resistant alloy additions.1พบ ผลิตภัณฑ์
JPY: 33,210
USD: 208.32
-
Negative Tips for T-Max P Turning (110) 1 Set (10 Pieces) CNMG160616SMR
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 30,530
USD: 191.51
-
Negative Tips for T-Max P Turning (110) 1105 1 Set (10 Pieces) CNMG160616SMR
Sharp cutting blade with high machining performance and high toughness.
Suitable for finishing stainless steel at high cutting speed.1พบ ผลิตภัณฑ์
JPY: 31,860
USD: 199.85
-
Negative Tips for T-Max P Turning (110) 1115 1 Set (10 Pieces) CNMG160616SMR
Sharp cutting blade and adhesion to ultrafine particle base material, high high temperature hardness and excellent plastic deformation combined with excellent cutting blade reliability.
Achieved uniform surface wear and high machining performance.1พบ ผลิตภัณฑ์
JPY: 31,860
USD: 199.85
-
Negative Tips for T-Max P Turning (110) 1125 1 Set (10 Pieces) CNMG160616SMR
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 31,860
USD: 199.85
-
Negative Tips for T-Max P Turning (110) H 13 A1 Set (10 Pieces) CNMG160616SMR
Excellent wear resistance and toughness.
For general turning cast iron and non-ferrous metal processing.1พบ ผลิตภัณฑ์
JPY: 23,210
USD: 145.59
-
Negative Tips for T-Max P Turning (110) GC 15 1 Set (10 Pieces) CNMG160616XMR
Precision grade coated carbide chip for mixed workpiece outer diameter and general inner diameter machining.
For mixed work processing.1พบ ผลิตภัณฑ์
JPY: 31,860
USD: 199.85
-
Negative Tips for T-Max P Turning (112) 4335 1 Set (10 Pieces) CNMG160624PR
Coating material type for steel and cast steel in unstable working condition.
High cutting edge reliability and excellent chip discharge in intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 32,740
USD: 205.37
-
Negative Tips for T-Max P Turning (110) 235 1 Set (10 Pieces) CNMG190604QM
It is a material type with high toughness and edge strength.
Ideal for low speed intermittent machining.1พบ ผลิตภัณฑ์
JPY: 40,430
USD: 253.61
