[SANDVIK K.K.]เครื่องมือตัด
ตัวกรอง
- ตามกลุ่มผลิตภัณฑ์
- ตามผลิตภัณฑ์
เรียงลําดับตาม:
-
Negative Tips for T-Max P Turning (112) 4415 1 Set (10 Pieces) CNMG120408WL
This material type is suitable for processing that requires heat resistance.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 24,650
USD: 154.62
-
Negative Tips for T-Max P Turning (112) 4425 1 Set (10 Pieces) CNMG120408WL
Compatible with most steel turning operations.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 24,650
USD: 154.62
-
Negative Tips for T-Max P Turning (110) 1525 1 Set (10 Pieces) CNMG120408WM
Suitable for cases where excellent machined surface roughness and sharp cutting edge are required.
Excellent impact resistance for light cutting and intermittent machining.1พบ ผลิตภัณฑ์
JPY: 21,090
USD: 132.29
-
Negative Tips for T-Max P Turning (110) 2015 1 Set (10 Pieces) CNMG120408WM
First recommended material type for continuous cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 22,240
USD: 139.51
-
Negative Tips for T-Max P Turning (110) 3005 1 Set (10 Pieces) CNMG120408WM
CVD coated carbide material with excellent abrasion resistance and heat resistance.
For general turning cast iron processing.1พบ ผลิตภัณฑ์
JPY: 21,090
USD: 132.29
-
Negative Tips for T-Max P Turning (110) 3210 1 Set (10 Pieces) CNMG120408WM
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 23,010
USD: 144.34
-
Negative Tips for T-Max P Turning (110) 3225 1 Set (10 Pieces) CNMG120408WM
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 23,010
USD: 144.34
-
Negative Tips for T-Max P Turning (112) 4335 1 Set (10 Pieces) CNMG120408WM
Coating material type for steel and cast steel in unstable working condition.
High cutting edge reliability and excellent chip discharge in intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 23,880
USD: 149.79
-
Negative Tips for T-Max P Turning (112) 4415 1 Set (10 Pieces) CNMG120408WM
This material type is suitable for processing that requires heat resistance.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 24,650
USD: 154.62
-
Negative Tips for T-Max P Turning (112) 4425 1 Set (10 Pieces) CNMG120408WM
Compatible with most steel turning operations.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 24,650
USD: 154.62
-
Negative Tips for T-Max P Turning (110) 2015 1 Set (10 Pieces) CNMG120408WMX
First recommended material type for continuous cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 22,240
USD: 139.51
-
Negative Tips for T-Max P Turning (110) 3210 1 Set (10 Pieces) CNMG120408WMX
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 23,010
USD: 144.34
-
Negative Tips for T-Max P Turning (110) 3225 1 Set (10 Pieces) CNMG120408WMX
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 23,010
USD: 144.34
-
Negative Tips for T-Max P Turning (112) 4305 1 Set (10 Pieces) CNMG120408WMX
Suitable for processing requiring high chip emissions.
For general turning steel machining.1พบ ผลิตภัณฑ์
JPY: 24,740
USD: 155.19
-
Negative Tips for T-Max P Turning (112) 4335 1 Set (10 Pieces) CNMG120408WMX
Coating material type for steel and cast steel in unstable working condition.
High cutting edge reliability and excellent chip discharge in intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 23,880
USD: 149.79
-
Negative Tips for T-Max P Turning (112) 4415 1 Set (10 Pieces) CNMG120408WMX
This material type is suitable for processing that requires heat resistance.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 24,650
USD: 154.62
-
Negative Tips for T-Max P Turning (112) 4425 1 Set (10 Pieces) CNMG120408WMX
Compatible with most steel turning operations.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 24,650
USD: 154.62
-
Negative Tips for T-Max P Turning (112) 2220 1 Set (10 Pieces) CNMG120408XF
Suitable for machining austenitic and duplex stainless steels.
Suitable for both wet and dry.1พบ ผลิตภัณฑ์
JPY: 19,940
USD: 125.08
-
Negative Tips for T-Max P Turning (112) 4415 1 Set (10 Pieces) CNMG120408XF
This material type is suitable for processing that requires heat resistance.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 21,380
USD: 134.11
-
Negative Tips for T-Max P Turning (112) 4425 1 Set (10 Pieces) CNMG120408XF
Compatible with most steel turning operations.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 21,380
USD: 134.11
-
Negative Tips for T-Max P Turning (110) GC 15 1 Set (10 Pieces) CNMG120408XF
Precision grade coated carbide chip for mixed workpiece outer diameter and general inner diameter machining.
For mixed work processing.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) GC 30 1 Set (10 Pieces) CNMG120408XF
Precision grade coated carbide chip for mixed workpiece outer diameter and general inner diameter machining.
For mixed work processing.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) 2015 1 Set (10 Pieces) CNMG120408XM
First recommended material type for continuous cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 19,350
USD: 121.38
-
Negative Tips for T-Max P Turning (110) 2025 1 Set (10 Pieces) CNMG120408XM
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 19,350
USD: 121.38
-
Negative Tips for T-Max P Turning (112) 2220 1 Set (10 Pieces) CNMG120408XM
Suitable for machining austenitic and duplex stainless steels.
Suitable for both wet and dry.1พบ ผลิตภัณฑ์
JPY: 19,940
USD: 125.08
-
Negative Tips for T-Max P Turning (112) 4415 1 Set (10 Pieces) CNMG120408XM
This material type is suitable for processing that requires heat resistance.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 21,380
USD: 134.11
-
Negative Tips for T-Max P Turning (112) 4425 1 Set (10 Pieces) CNMG120408XM
Compatible with most steel turning operations.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 21,380
USD: 134.11
-
Negative Tips for T-Max P Turning (110) GC 15 1 Set (10 Pieces) CNMG120408XM
Precision grade coated carbide chip for mixed workpiece outer diameter and general inner diameter machining.
For mixed work processing.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) GC 30 1 Set (10 Pieces) CNMG120408XM
Precision grade coated carbide chip for mixed workpiece outer diameter and general inner diameter machining.
For mixed work processing.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) 2025 1 Set (10 Pieces) CNMG120408XMR
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 19,350
USD: 121.38
-
Negative Tips for T-Max P Turning (112) 2220 1 Set (10 Pieces) CNMG120408XMR
Suitable for machining austenitic and duplex stainless steels.
Suitable for both wet and dry.1พบ ผลิตภัณฑ์
JPY: 19,940
USD: 125.08
-
Negative Tips for T-Max P Turning (112) 4415 1 Set (10 Pieces) CNMG120408XMR
This material type is suitable for processing that requires heat resistance.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 21,380
USD: 134.11
-
Negative Tips for T-Max P Turning (112) 4425 1 Set (10 Pieces) CNMG120408XMR
Compatible with most steel turning operations.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 21,380
USD: 134.11
-
Negative Tips for T-Max P Turning (110) GC 15 1 Set (10 Pieces) CNMG120408XMR
Precision grade coated carbide chip for mixed workpiece outer diameter and general inner diameter machining.
For mixed work processing.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) GC 30 1 Set (10 Pieces) CNMG120408XMR
Precision grade coated carbide chip for mixed workpiece outer diameter and general inner diameter machining.
For mixed work processing.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) 3005 1 Set (10 Pieces) CNMG120412KF
CVD coated carbide material with excellent abrasion resistance and heat resistance.
For general turning cast iron processing.1พบ ผลิตภัณฑ์
JPY: 18,390
USD: 115.36
-
Negative Tips for T-Max P Turning (110) 3210 1 Set (10 Pieces) CNMG120412KF
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 20,040
USD: 125.71
-
Negative Tips for T-Max P Turning (110) 3225 1 Set (10 Pieces) CNMG120412KF
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 20,040
USD: 125.71
-
Negative Tips for T-Max P Turning (110) 3005 1 Set (10 Pieces) CNMG120412KM
CVD coated carbide material with excellent abrasion resistance and heat resistance.
For general turning cast iron processing.1พบ ผลิตภัณฑ์
JPY: 18,390
USD: 115.36
-
Negative Tips for T-Max P Turning (110) 3205 1 Set (10 Pieces) CNMG120412KM
CVD coated carbide type for outer diameter and general inner diameter machining of small parts.
For general turning cast iron processing.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
