[SANDVIK K.K.]เครื่องมือตัด
ตัวกรอง
- ตามกลุ่มผลิตภัณฑ์
- ตามผลิตภัณฑ์
เรียงลําดับตาม:
-
Negative Tips for T-Max P Turning (112) 2220 1 Set (10 Pieces) CNMG120408QM
Suitable for machining austenitic and duplex stainless steels.
Suitable for both wet and dry.1พบ ผลิตภัณฑ์
JPY: 19,940
USD: 125.08
-
Negative Tips for T-Max P Turning (110) 235 1 Set (10 Pieces) CNMG120408QM
It is a material type with high toughness and edge strength.
Ideal for low speed intermittent machining.1พบ ผลิตภัณฑ์
JPY: 18,390
USD: 115.36
-
Negative Tips for T-Max P Turning (112) 4305 1 Set (10 Pieces) CNMG120408QM
Suitable for processing requiring high chip emissions.
For general turning steel machining.1พบ ผลิตภัณฑ์
JPY: 21,560
USD: 135.24
-
Negative Tips for T-Max P Turning (112) 4335 1 Set (10 Pieces) CNMG120408QM
Coating material type for steel and cast steel in unstable working condition.
High cutting edge reliability and excellent chip discharge in intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 20,800
USD: 130.47
-
Negative Tips for T-Max P Turning (112) 4415 1 Set (10 Pieces) CNMG120408QM
This material type is suitable for processing that requires heat resistance.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 21,380
USD: 134.11
-
Negative Tips for T-Max P Turning (112) 4425 1 Set (10 Pieces) CNMG120408QM
Compatible with most steel turning operations.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 21,380
USD: 134.11
-
Negative Tips for T-Max P Turning (110) 5015 1 Set (10 Pieces) CNMG120408QM
Constructed cutting edge and excellent resistance to plastic deformation.
For general turning steel.1พบ ผลิตภัณฑ์
JPY: 18,390
USD: 115.36
-
Negative Tips for T-Max P Turning (110) H 13 A1 Set (10 Pieces) CNMG120408QM
Excellent wear resistance and toughness.
For general turning cast iron and non-ferrous metal processing.1พบ ผลิตภัณฑ์
JPY: 14,640
USD: 91.83
-
Negative Tips for T-Max P Turning (110) S05F1 Set (10 Pieces) CNMG120408QM
Can also be used for high-speed finishing of heat-resistant alloys, low-speed long-time machining, and rough machining.
For general rotation-resistant alloy additions.1พบ ผลิตภัณฑ์
JPY: 21,090
USD: 132.29
-
Negative Tips for T-Max P Turning (110) 1105 1 Set (10 Pieces) CNMG120408SF
Sharp cutting blade with high machining performance and high toughness.
Suitable for finishing stainless steel at high cutting speed.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) 1115 1 Set (10 Pieces) CNMG120408SF
Sharp cutting blade and adhesion to ultrafine particle base material, high high temperature hardness and excellent plastic deformation combined with excellent cutting blade reliability.
Achieved uniform surface wear and high machining performance.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) 1125 1 Set (10 Pieces) CNMG120408SF
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) H 13 A1 Set (10 Pieces) CNMG120408SF
Excellent wear resistance and toughness.
For general turning cast iron and non-ferrous metal processing.1พบ ผลิตภัณฑ์
JPY: 14,640
USD: 91.83
-
Negative Tips for T-Max P Turning (110) S05F1 Set (10 Pieces) CNMG120408SF
Can also be used for high-speed finishing of heat-resistant alloys, low-speed long-time machining, and rough machining.
For general rotation-resistant alloy additions.1พบ ผลิตภัณฑ์
JPY: 21,090
USD: 132.29
-
Negative Tips for T-Max P Turning (110) 1105 1 Set (10 Pieces) CNMG120408SM
Sharp cutting blade with high machining performance and high toughness.
Suitable for finishing stainless steel at high cutting speed.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) 1115 1 Set (10 Pieces) CNMG120408SM
Sharp cutting blade and adhesion to ultrafine particle base material, high high temperature hardness and excellent plastic deformation combined with excellent cutting blade reliability.
Achieved uniform surface wear and high machining performance.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) 1125 1 Set (10 Pieces) CNMG120408SM
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) H 13 A1 Set (10 Pieces) CNMG120408SM
Excellent wear resistance and toughness.
For general turning cast iron and non-ferrous metal processing.1พบ ผลิตภัณฑ์
JPY: 14,640
USD: 91.83
-
Negative Tips for T-Max P Turning (110) S05F1 Set (10 Pieces) CNMG120408SM
Can also be used for high-speed finishing of heat-resistant alloys, low-speed long-time machining, and rough machining.
For general rotation-resistant alloy additions.1พบ ผลิตภัณฑ์
JPY: 21,090
USD: 132.29
-
Negative Tips for T-Max P Turning (110) 1115 1 Set (10 Pieces) CNMG120408SMC
Sharp cutting blade and adhesion to ultrafine particle base material, high high temperature hardness and excellent plastic deformation combined with excellent cutting blade reliability.
Achieved uniform surface wear and high machining performance.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) 1 Set (10 Pieces) CNMG120408SMR
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 19,350
USD: 121.38
-
Negative Tips for T-Max P Turning (110) 1105 1 Set (10 Pieces) CNMG120408SMR
Sharp cutting blade with high machining performance and high toughness.
Suitable for finishing stainless steel at high cutting speed.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) 1115 1 Set (10 Pieces) CNMG120408SMR
Sharp cutting blade and adhesion to ultrafine particle base material, high high temperature hardness and excellent plastic deformation combined with excellent cutting blade reliability.
Achieved uniform surface wear and high machining performance.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) 1125 1 Set (10 Pieces) CNMG120408SMR
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) H 13 A1 Set (10 Pieces) CNMG120408SMR
Excellent wear resistance and toughness.
For general turning cast iron and non-ferrous metal processing.1พบ ผลิตภัณฑ์
JPY: 14,640
USD: 91.83
-
Negative Tips for T-Max P Turning (110) S05F1 Set (10 Pieces) CNMG120408SMR
Can also be used for high-speed finishing of heat-resistant alloys, low-speed long-time machining, and rough machining.
For general rotation-resistant alloy additions.1พบ ผลิตภัณฑ์
JPY: 21,090
USD: 132.29
-
Negative Tips for T-Max P Turning (110) 1115 1 Set (10 Pieces) CNMG120408WF
Sharp cutting blade and adhesion to ultrafine particle base material, high high temperature hardness and excellent plastic deformation combined with excellent cutting blade reliability.
Achieved uniform surface wear and high machining performance.1พบ ผลิตภัณฑ์
JPY: 23,210
USD: 145.59
-
Negative Tips for T-Max P Turning (110) 1125 1 Set (10 Pieces) CNMG120408WF
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 23,210
USD: 145.59
-
Negative Tips for T-Max P Turning (110) 1515 1 Set (10 Pieces) CNMG120408WF
Suitable for cases where excellent machined surface roughness and sharp cutting edge are required.
Excellent impact resistance for light cutting and intermittent machining.1พบ ผลิตภัณฑ์
JPY: 23,210
USD: 145.59
-
Negative Tips for T-Max P Turning (110) 1525 1 Set (10 Pieces) CNMG120408WF
Suitable for cases where excellent machined surface roughness and sharp cutting edge are required.
Excellent impact resistance for light cutting and intermittent machining.1พบ ผลิตภัณฑ์
JPY: 21,090
USD: 132.29
-
Negative Tips for T-Max P Turning (110) 2015 1 Set (10 Pieces) CNMG120408WF
First recommended material type for continuous cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 22,240
USD: 139.51
-
Negative Tips for T-Max P Turning (110) 3005 1 Set (10 Pieces) CNMG120408WF
CVD coated carbide material with excellent abrasion resistance and heat resistance.
For general turning cast iron processing.1พบ ผลิตภัณฑ์
JPY: 21,090
USD: 132.29
-
Negative Tips for T-Max P Turning (110) 3210 1 Set (10 Pieces) CNMG120408WF
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 23,010
USD: 144.34
-
Negative Tips for T-Max P Turning (110) 3225 1 Set (10 Pieces) CNMG120408WF
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 23,010
USD: 144.34
-
Negative Tips for T-Max P Turning (112) 4415 1 Set (10 Pieces) CNMG120408WF
This material type is suitable for processing that requires heat resistance.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 24,650
USD: 154.62
-
Negative Tips for T-Max P Turning (112) 4425 1 Set (10 Pieces) CNMG120408WF
Compatible with most steel turning operations.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 24,650
USD: 154.62
-
Negative Tips for T-Max P Turning (110) 5015 1 Set (10 Pieces) CNMG120408WF
Constructed cutting edge and excellent resistance to plastic deformation.
For general turning steel.1พบ ผลิตภัณฑ์
JPY: 21,090
USD: 132.29
-
Negative Tips for T-Max P Turning (110) 1515 1 Set (10 Pieces) CNMG120408WL
Suitable for cases where excellent machined surface roughness and sharp cutting edge are required.
Excellent impact resistance for light cutting and intermittent machining.1พบ ผลิตภัณฑ์
JPY: 23,210
USD: 145.59
-
Negative Tips for T-Max P Turning (110) 1525 1 Set (10 Pieces) CNMG120408WL
Suitable for cases where excellent machined surface roughness and sharp cutting edge are required.
Excellent impact resistance for light cutting and intermittent machining.1พบ ผลิตภัณฑ์
JPY: 21,090
USD: 132.29
-
Negative Tips for T-Max P Turning (110) 2025 1 Set (10 Pieces) CNMG120408WL
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 22,240
USD: 139.51
