[SANDVIK K.K.]เครื่องมือตัด
ตัวกรอง
- ตามกลุ่มผลิตภัณฑ์
- ตามผลิตภัณฑ์
เรียงลําดับตาม:
-
Negative Tips for T-Max P Turning (110) 1125 1 Set (10 Pieces) CNMG120408MF
For heat resistant alloy processing.
For finishing.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) 2015 1 Set (10 Pieces) CNMG120408MF
First recommended material type for continuous cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 19,350
USD: 121.38
-
Negative Tips for T-Max P Turning (110) 2025 1 Set (10 Pieces) CNMG120408MF
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 19,350
USD: 121.38
-
Negative Tips for T-Max P Turning (112) 2220 1 Set (10 Pieces) CNMG120408MF
Suitable for machining austenitic and duplex stainless steels.
Suitable for both wet and dry.1พบ ผลิตภัณฑ์
JPY: 19,940
USD: 125.08
-
Negative Tips for T-Max P Turning (110) 235 1 Set (10 Pieces) CNMG120408MF
It is a material type with high toughness and edge strength.
Ideal for low speed intermittent machining.1พบ ผลิตภัณฑ์
JPY: 18,390
USD: 115.36
-
Negative Tips for T-Max P Turning (112) 4335 1 Set (10 Pieces) CNMG120408MF
Coating material type for steel and cast steel in unstable working condition.
High cutting edge reliability and excellent chip discharge in intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 20,800
USD: 130.47
-
Negative Tips for T-Max P Turning (110) 5015 1 Set (10 Pieces) CNMG120408MF
Constructed cutting edge and excellent resistance to plastic deformation.
For general turning steel.1พบ ผลิตภัณฑ์
JPY: 18,390
USD: 115.36
-
Negative Tips for T-Max P Turning (110) S05F1 Set (10 Pieces) CNMG120408MF
Can also be used for high-speed finishing of heat-resistant alloys, low-speed long-time machining, and rough machining.
For general rotation-resistant alloy additions.1พบ ผลิตภัณฑ์
JPY: 21,090
USD: 132.29
-
Negative Tips for T-Max P Turning (110) 1115 1 Set (10 Pieces) CNMG120408MM
Sharp cutting blade and adhesion to ultrafine particle base material, high high temperature hardness and excellent plastic deformation combined with excellent cutting blade reliability.
Achieved uniform surface wear and high machining performance.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) 1125 1 Set (10 Pieces) CNMG120408MM
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) 2015 1 Set (10 Pieces) CNMG120408MM
First recommended material type for continuous cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 19,350
USD: 121.38
-
Negative Tips for T-Max P Turning (110) 2025 1 Set (10 Pieces) CNMG120408MM
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 19,350
USD: 121.38
-
Negative Tips for T-Max P Turning (110) 2035 1 Set (10 Pieces) CNMG120408MM
Excellent heat-resistant shock resistance, for high-speed intermittent machining.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 18,880
USD: 118.43
-
Negative Tips for T-Max P Turning (112) 2220 1 Set (10 Pieces) CNMG120408MM
Suitable for machining austenitic and duplex stainless steels.
Suitable for both wet and dry.1พบ ผลิตภัณฑ์
JPY: 19,940
USD: 125.08
-
Negative Tips for T-Max P Turning (110) H 13 A1 Set (10 Pieces) CNMG120408MM
Excellent wear resistance and toughness.
For general turning cast iron and non-ferrous metal processing.1พบ ผลิตภัณฑ์
JPY: 14,640
USD: 91.83
-
Negative Tips for T-Max P Turning (110) 2025 1 Set (10 Pieces) CNMG120408MMC
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 19,350
USD: 121.38
-
Negative Tips for T-Max P Turning (110) 2015 1 Set (10 Pieces) CNMG120408MR
First recommended material type for continuous cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 19,350
USD: 121.38
-
Negative Tips for T-Max P Turning (110) 2025 1 Set (10 Pieces) CNMG120408MR
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 19,350
USD: 121.38
-
Negative Tips for T-Max P Turning (110) 2035 1 Set (10 Pieces) CNMG120408MR
Excellent heat-resistant shock resistance, for high-speed intermittent machining.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 18,880
USD: 118.43
-
Negative Tips for T-Max P Turning (112) 2220 1 Set (10 Pieces) CNMG120408MR
Suitable for machining austenitic and duplex stainless steels.
Suitable for both wet and dry.1พบ ผลิตภัณฑ์
JPY: 19,940
USD: 125.08
-
Negative Tips for T-Max P Turning (110) 235 1 Set (10 Pieces) CNMG120408MR
It is a material type with high toughness and edge strength.
Ideal for low speed intermittent machining.1พบ ผลิตภัณฑ์
JPY: 18,390
USD: 115.36
-
Negative Tips for T-Max P Turning (112) 4335 1 Set (10 Pieces) CNMG120408MR
Coating material type for steel and cast steel in unstable working condition.
High cutting edge reliability and excellent chip discharge in intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 20,800
USD: 130.47
-
Negative Tips for T-Max P Turning (110) 1515 1 Set (10 Pieces) CNMG120408PF
Suitable for cases where excellent machined surface roughness and sharp cutting edge are required.
Excellent impact resistance for light cutting and intermittent machining.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) 1525 1 Set (10 Pieces) CNMG120408PF
Suitable for cases where excellent machined surface roughness and sharp cutting edge are required.
Excellent impact resistance for light cutting and intermittent machining.1พบ ผลิตภัณฑ์
JPY: 18,390
USD: 115.36
-
Negative Tips for T-Max P Turning (112) 4415 1 Set (10 Pieces) CNMG120408PF
This material type is suitable for processing that requires heat resistance.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 21,380
USD: 134.11
-
Negative Tips for T-Max P Turning (112) 4425 1 Set (10 Pieces) CNMG120408PF
Compatible with most steel turning operations.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 21,380
USD: 134.11
-
Negative Tips for T-Max P Turning (110) 5015 1 Set (10 Pieces) CNMG120408PF
Constructed cutting edge and excellent resistance to plastic deformation.
For general turning steel.1พบ ผลิตภัณฑ์
JPY: 18,390
USD: 115.36
-
Negative Tips for T-Max P Turning (110) 1525 1 Set (10 Pieces) CNMG120408PM
Suitable for cases where excellent machined surface roughness and sharp cutting edge are required.
Excellent impact resistance for light cutting and intermittent machining.1พบ ผลิตภัณฑ์
JPY: 18,390
USD: 115.36
-
Negative Tips for T-Max P Turning (112) 4335 1 Set (10 Pieces) CNMG120408PM
Coating material type for steel and cast steel in unstable working condition.
High cutting edge reliability and excellent chip discharge in intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 20,800
USD: 130.47
-
Negative Tips for T-Max P Turning (112) 4415 1 Set (10 Pieces) CNMG120408PM
This material type is suitable for processing that requires heat resistance.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 21,380
USD: 134.11
-
Negative Tips for T-Max P Turning (112) 4425 1 Set (10 Pieces) CNMG120408PM
Compatible with most steel turning operations.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 21,380
USD: 134.11
-
Negative Tips for T-Max P Turning (110) 2015 1 Set (10 Pieces) CNMG120408PR
First recommended material type for continuous cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 19,350
USD: 121.38
-
Negative Tips for T-Max P Turning (110) 2025 1 Set (10 Pieces) CNMG120408PR
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 19,060
USD: 119.56
-
Negative Tips for T-Max P Turning (112) 4335 1 Set (10 Pieces) CNMG120408PR
Coating material type for steel and cast steel in unstable working condition.
High cutting edge reliability and excellent chip discharge in intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 20,800
USD: 130.47
-
Negative Tips for T-Max P Turning (112) 4415 1 Set (10 Pieces) CNMG120408PR
This material type is suitable for processing that requires heat resistance.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 21,380
USD: 134.11
-
Negative Tips for T-Max P Turning (112) 4425 1 Set (10 Pieces) CNMG120408PR
Compatible with most steel turning operations.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 21,380
USD: 134.11
-
Negative Tips for T-Max P Turning (110) 1105 1 Set (10 Pieces) CNMG120408QM
Sharp cutting blade with high machining performance and high toughness.
Suitable for finishing stainless steel at high cutting speed.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) 1115 1 Set (10 Pieces) CNMG120408QM
Sharp cutting blade and adhesion to ultrafine particle base material, high high temperature hardness and excellent plastic deformation combined with excellent cutting blade reliability.
Achieved uniform surface wear and high machining performance.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) 2015 1 Set (10 Pieces) CNMG120408QM
First recommended material type for continuous cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 19,350
USD: 121.38
-
Negative Tips for T-Max P Turning (110) 2025 1 Set (10 Pieces) CNMG120408QM
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 19,350
USD: 121.38
