[SANDVIK K.K.]เครื่องมือตัด
ตัวกรอง
- ตามกลุ่มผลิตภัณฑ์
- ตามผลิตภัณฑ์
เรียงลําดับตาม:
-
Negative Tips for T-Max P Turning (110) 3005 1 Set (10 Pieces) CNMG120404WF
CVD coated carbide material with excellent abrasion resistance and heat resistance.
For general turning cast iron processing.1พบ ผลิตภัณฑ์
JPY: 21,090
USD: 132.29
-
Negative Tips for T-Max P Turning (110) 3210 1 Set (10 Pieces) CNMG120404WF
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 23,010
USD: 144.34
-
Negative Tips for T-Max P Turning (110) 3225 1 Set (10 Pieces) CNMG120404WF
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 23,010
USD: 144.34
-
Negative Tips for T-Max P Turning (112) 4415 1 Set (10 Pieces) CNMG120404WF
This material type is suitable for processing that requires heat resistance.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 24,650
USD: 154.62
-
Negative Tips for T-Max P Turning (112) 4425 1 Set (10 Pieces) CNMG120404WF
Compatible with most steel turning operations.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 24,650
USD: 154.62
-
Negative Tips for T-Max P Turning (110) 5015 1 Set (10 Pieces) CNMG120404WF
Constructed cutting edge and excellent resistance to plastic deformation.
For general turning steel.1พบ ผลิตภัณฑ์
JPY: 21,090
USD: 132.29
-
Negative Tips for T-Max P Turning (110) 1525 1 Set (10 Pieces) CNMG120404WL
Suitable for cases where excellent machined surface roughness and sharp cutting edge are required.
Excellent impact resistance for light cutting and intermittent machining.1พบ ผลิตภัณฑ์
JPY: 21,090
USD: 132.29
-
Negative Tips for T-Max P Turning (112) 4415 1 Set (10 Pieces) CNMG120404WL
This material type is suitable for processing that requires heat resistance.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 24,650
USD: 154.62
-
Negative Tips for T-Max P Turning (112) 4425 1 Set (10 Pieces) CNMG120404WL
Compatible with most steel turning operations.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 24,650
USD: 154.62
-
Negative Wiper Tips for T-Max P Turning (110) 1525 1 Set (10 Pieces) CNMG120404WP
For processing general steel and low carbon steel.
For measures against chip disposal.1พบ ผลิตภัณฑ์
JPY: 26,660
USD: 167.23
-
Negative Tips for T-Max P Turning (112) 2220 1 Set (10 Pieces) CNMG120404XF
Suitable for machining austenitic and duplex stainless steels.
Suitable for both wet and dry.1พบ ผลิตภัณฑ์
JPY: 19,940
USD: 125.08
-
Negative Tips for T-Max P Turning (112) 4415 1 Set (10 Pieces) CNMG120404XF
This material type is suitable for processing that requires heat resistance.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 21,380
USD: 134.11
-
Negative Tips for T-Max P Turning (112) 4425 1 Set (10 Pieces) CNMG120404XF
Compatible with most steel turning operations.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 21,380
USD: 134.11
-
Negative Tips for T-Max P Turning (110) GC 15 1 Set (10 Pieces) CNMG120404XF
Precision grade coated carbide chip for mixed workpiece outer diameter and general inner diameter machining.
For mixed work processing.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) GC 30 1 Set (10 Pieces) CNMG120404XF
Precision grade coated carbide chip for mixed workpiece outer diameter and general inner diameter machining.
For mixed work processing.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) 2025 1 Set (10 Pieces) CNMG120404XM
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 19,350
USD: 121.38
-
Negative Tips for T-Max P Turning (112) 2220 1 Set (10 Pieces) CNMG120404XM
Suitable for machining austenitic and duplex stainless steels.
Suitable for both wet and dry.1พบ ผลิตภัณฑ์
JPY: 19,940
USD: 125.08
-
Negative Tips for T-Max P Turning (112) 4425 1 Set (10 Pieces) CNMG120404XM
Compatible with most steel turning operations.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 21,380
USD: 134.11
-
Negative Tips for T-Max P Turning (110) GC 15 1 Set (10 Pieces) CNMG120404XM
Precision grade coated carbide chip for mixed workpiece outer diameter and general inner diameter machining.
For mixed work processing.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) GC 30 1 Set (10 Pieces) CNMG120404XM
Precision grade coated carbide chip for mixed workpiece outer diameter and general inner diameter machining.
For mixed work processing.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) H 13 A1 Set (10 Pieces) CNMG120408
Excellent wear resistance and toughness.
For general turning cast iron and non-ferrous metal processing.1พบ ผลิตภัณฑ์
JPY: 14,640
USD: 91.83
-
Negative Tips for T-Max P Turning (110) 3005 1 Set (10 Pieces) CNMG120408KF
CVD coated carbide material with excellent abrasion resistance and heat resistance.
For general turning cast iron processing.1พบ ผลิตภัณฑ์
JPY: 18,390
USD: 115.36
-
Negative Tips for T-Max P Turning (110) 3210 1 Set (10 Pieces) CNMG120408KF
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 20,040
USD: 125.71
-
Negative Tips for T-Max P Turning (110) 3225 1 Set (10 Pieces) CNMG120408KF
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 20,040
USD: 125.71
-
Negative Tips for T-Max P Turning (110) 3005 1 Set (10 Pieces) CNMG120408KM
CVD coated carbide material with excellent abrasion resistance and heat resistance.
For general turning cast iron processing.1พบ ผลิตภัณฑ์
JPY: 18,390
USD: 115.36
-
Negative Tips for T-Max P Turning (110) 3205 1 Set (10 Pieces) CNMG120408KM
CVD coated carbide type for outer diameter and general inner diameter machining of small parts.
For general turning cast iron processing.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) 3210 1 Set (10 Pieces) CNMG120408KM
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 20,040
USD: 125.71
-
Negative Tips for T-Max P Turning (110) 3225 1 Set (10 Pieces) CNMG120408KM
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 20,040
USD: 125.71
-
Negative Tips for T-Max P Turning (110) 3205 1 Set (10 Pieces) CNMG120408KR
CVD coated carbide type for outer diameter and general inner diameter machining of small parts.
For general turning cast iron processing.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) 3210 1 Set (10 Pieces) CNMG120408KR
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 20,040
USD: 125.71
-
Negative Tips for T-Max P Turning (110) 3225 1 Set (10 Pieces) CNMG120408KR
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 20,040
USD: 125.71
-
Negative Tips for T-Max P Turning (110) 3205 1 Set (10 Pieces) CNMG120408KRR
CVD coated carbide type for outer diameter and general inner diameter machining of small parts.
For general turning cast iron processing.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) 3210 1 Set (10 Pieces) CNMG120408KRR
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 20,040
USD: 125.71
-
Negative Tips for T-Max P Turning (110) 1515 1 Set (10 Pieces) CNMG120408LC
Suitable for cases where excellent machined surface roughness and sharp cutting edge are required.
Excellent impact resistance for light cutting and intermittent machining.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) 1525 1 Set (10 Pieces) CNMG120408LC
Suitable for cases where excellent machined surface roughness and sharp cutting edge are required.
Excellent impact resistance for light cutting and intermittent machining.1พบ ผลิตภัณฑ์
JPY: 18,390
USD: 115.36
-
Negative Tips for T-Max P Turning (110) 2025 1 Set (10 Pieces) CNMG120408LC
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 19,350
USD: 121.38
-
Negative Tips for T-Max P Turning (112) 4415 1 Set (10 Pieces) CNMG120408LC
This material type is suitable for processing that requires heat resistance.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 21,380
USD: 134.11
-
Negative Tips for T-Max P Turning (112) 4425 1 Set (10 Pieces) CNMG120408LC
Compatible with most steel turning operations.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 21,380
USD: 134.11
-
Negative Tips for T-Max P Turning (110) 1105 1 Set (10 Pieces) CNMG120408MF
Sharp cutting blade with high machining performance and high toughness.
Suitable for finishing stainless steel at high cutting speed.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) 1115 1 Set (10 Pieces) CNMG120408MF
Sharp cutting blade and adhesion to ultrafine particle base material, high high temperature hardness and excellent plastic deformation combined with excellent cutting blade reliability.
Achieved uniform surface wear and high machining performance.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
