[SANDVIK K.K.]เครื่องมือตัด
ตัวกรอง
- ตามกลุ่มผลิตภัณฑ์
- ตามผลิตภัณฑ์
เรียงลําดับตาม:
-
Negative Tips for T-Max P Turning (110) 235 1 Set (10 Pieces) CNMG090304MF
It is a material type with high toughness and edge strength.
Ideal for low speed intermittent machining.1พบ ผลิตภัณฑ์
JPY: 12,040
USD: 75.52
-
Negative Tips for T-Max P Turning (110) 5015 1 Set (10 Pieces) CNMG090304MF
Constructed cutting edge and excellent resistance to plastic deformation.
For general turning steel.1พบ ผลิตภัณฑ์
JPY: 12,040
USD: 75.52
-
Negative Tips for T-Max P Turning (110) 1125 1 Set (10 Pieces) CNMG090304MM
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 13,200
USD: 82.80
-
Negative Tips for T-Max P Turning (110) 2025 1 Set (10 Pieces) CNMG090304MM
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 12,610
USD: 79.10
-
Negative Tips for T-Max P Turning (110) 1525 1 Set (10 Pieces) CNMG090304PF
Suitable for cases where excellent machined surface roughness and sharp cutting edge are required.
Excellent impact resistance for light cutting and intermittent machining.1พบ ผลิตภัณฑ์
JPY: 12,040
USD: 75.52
-
Negative Tips for T-Max P Turning (110) 5015 1 Set (10 Pieces) CNMG090304PF
Constructed cutting edge and excellent resistance to plastic deformation.
For general turning steel.1พบ ผลิตภัณฑ์
JPY: 12,040
USD: 75.52
-
Negative Tips for T-Max P Turning (112) 4335 1 Set (10 Pieces) CNMG090304PM
Coating material type for steel and cast steel in unstable working condition.
High cutting edge reliability and excellent chip discharge in intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 13,590
USD: 85.25
-
Negative Tips for T-Max P Turning (110) 235 1 Set (10 Pieces) CNMG090304QM
It is a material type with high toughness and edge strength.
Ideal for low speed intermittent machining.1พบ ผลิตภัณฑ์
JPY: 12,040
USD: 75.52
-
Negative Tips for T-Max P Turning (110) 1125 1 Set (10 Pieces) CNMG090304WF
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 15,210
USD: 95.41
-
Negative Tips for T-Max P Turning (110) 1115 1 Set (10 Pieces) CNMG090308MF
Sharp cutting blade and adhesion to ultrafine particle base material, high high temperature hardness and excellent plastic deformation combined with excellent cutting blade reliability.
Achieved uniform surface wear and high machining performance.1พบ ผลิตภัณฑ์
JPY: 13,200
USD: 82.80
-
Negative Tips for T-Max P Turning (110) 1125 1 Set (10 Pieces) CNMG090308MF
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 13,200
USD: 82.80
-
Negative Tips for T-Max P Turning (110) 235 1 Set (10 Pieces) CNMG090308MF
It is a material type with high toughness and edge strength.
Ideal for low speed intermittent machining.1พบ ผลิตภัณฑ์
JPY: 12,040
USD: 75.52
-
Negative Tips for T-Max P Turning (110) 5015 1 Set (10 Pieces) CNMG090308MF
Constructed cutting edge and excellent resistance to plastic deformation.
For general turning steel.1พบ ผลิตภัณฑ์
JPY: 12,040
USD: 75.52
-
Negative Tips for T-Max P Turning (110) 1115 1 Set (10 Pieces) CNMG090308MM
Sharp cutting blade and adhesion to ultrafine particle base material, high high temperature hardness and excellent plastic deformation combined with excellent cutting blade reliability.
Achieved uniform surface wear and high machining performance.1พบ ผลิตภัณฑ์
JPY: 13,200
USD: 82.80
-
Negative Tips for T-Max P Turning (110) 1125 1 Set (10 Pieces) CNMG090308MM
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 13,200
USD: 82.80
-
Negative Tips for T-Max P Turning (110) 2025 1 Set (10 Pieces) CNMG090308MM
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 12,610
USD: 79.10
-
Negative Tips for T-Max P Turning (112) 2220 1 Set (10 Pieces) CNMG090308MM
Suitable for machining austenitic and duplex stainless steels.
Suitable for both wet and dry.1พบ ผลิตภัณฑ์
JPY: 13,000
USD: 81.55
-
Negative Tips for T-Max P Turning (110) 1515 1 Set (10 Pieces) CNMG090308PF
Suitable for cases where excellent machined surface roughness and sharp cutting edge are required.
Excellent impact resistance for light cutting and intermittent machining.1พบ ผลิตภัณฑ์
JPY: 13,200
USD: 82.80
-
Negative Tips for T-Max P Turning (110) 5015 1 Set (10 Pieces) CNMG090308PF
Constructed cutting edge and excellent resistance to plastic deformation.
For general turning steel.1พบ ผลิตภัณฑ์
JPY: 12,040
USD: 75.52
-
Negative Tips for T-Max P Turning (112) 4335 1 Set (10 Pieces) CNMG090308PM
Coating material type for steel and cast steel in unstable working condition.
High cutting edge reliability and excellent chip discharge in intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 13,590
USD: 85.25
-
Negative Tips for T-Max P Turning (110) 235 1 Set (10 Pieces) CNMG090308QM
It is a material type with high toughness and edge strength.
Ideal for low speed intermittent machining.1พบ ผลิตภัณฑ์
JPY: 12,040
USD: 75.52
-
Negative Tips for T-Max P Turning (112) 4335 1 Set (10 Pieces) CNMG090308QM
Coating material type for steel and cast steel in unstable working condition.
High cutting edge reliability and excellent chip discharge in intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 13,590
USD: 85.25
-
Negative Tips for T-Max P Turning (110) 1125 1 Set (10 Pieces) CNMG090308WF
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 15,210
USD: 95.41
-
Negative Tips for T-Max P Turning (110) 3210 1 Set (10 Pieces) CNMG090308WF
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 15,110
USD: 94.78
-
Negative Tips for T-Max P Turning (110) 3225 1 Set (10 Pieces) CNMG090308WF
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 15,110
USD: 94.78
-
Negative Tips for T-Max P Turning (110) GC 30 1 Set (10 Pieces) CNMG090308XM
Precision grade coated carbide chip for mixed workpiece outer diameter and general inner diameter machining.
For mixed work processing.1พบ ผลิตภัณฑ์
JPY: 13,200
USD: 82.80
-
Negative Tips for T-Max P Turning (110) 235 1 Set (10 Pieces) CNMG090312QM
It is a material type with high toughness and edge strength.
Ideal for low speed intermittent machining.1พบ ผลิตภัณฑ์
JPY: 12,040
USD: 75.52
-
Negative Tips for T-Max P Turning (110) 3005 1 Set (10 Pieces) CNMG120404KF
CVD coated carbide material with excellent abrasion resistance and heat resistance.
For general turning cast iron processing.1พบ ผลิตภัณฑ์
JPY: 18,390
USD: 115.36
-
Negative Tips for T-Max P Turning (110) 3210 1 Set (10 Pieces) CNMG120404KF
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 20,040
USD: 125.71
-
Negative Tips for T-Max P Turning (110) 3225 1 Set (10 Pieces) CNMG120404KF
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 20,040
USD: 125.71
-
Negative Tips for T-Max P Turning (110) 1515 1 Set (10 Pieces) CNMG120404LC
Suitable for cases where excellent machined surface roughness and sharp cutting edge are required.
Excellent impact resistance for light cutting and intermittent machining.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) 1525 1 Set (10 Pieces) CNMG120404LC
Suitable for cases where excellent machined surface roughness and sharp cutting edge are required.
Excellent impact resistance for light cutting and intermittent machining.1พบ ผลิตภัณฑ์
JPY: 18,390
USD: 115.36
-
Negative Tips for T-Max P Turning (110) 2025 1 Set (10 Pieces) CNMG120404LC
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 19,350
USD: 121.38
-
Negative Tips for T-Max P Turning (112) 4415 1 Set (10 Pieces) CNMG120404LC
This material type is suitable for processing that requires heat resistance.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 21,380
USD: 134.11
-
Negative Tips for T-Max P Turning (112) 4425 1 Set (10 Pieces) CNMG120404LC
Compatible with most steel turning operations.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 21,380
USD: 134.11
-
Negative Tips for T-Max P Turning (110) 1105 1 Set (10 Pieces) CNMG120404MF
Sharp cutting blade with high machining performance and high toughness.
Suitable for finishing stainless steel at high cutting speed.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) 1115 1 Set (10 Pieces) CNMG120404MF
Sharp cutting blade and adhesion to ultrafine particle base material, high high temperature hardness and excellent plastic deformation combined with excellent cutting blade reliability.
Achieved uniform surface wear and high machining performance.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) 2015 1 Set (10 Pieces) CNMG120404MF
First recommended material type for continuous cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 19,350
USD: 121.38
-
Negative Tips for T-Max P Turning (110) 2025 1 Set (10 Pieces) CNMG120404MF
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 19,350
USD: 121.38
-
Negative Tips for T-Max P Turning (112) 2220 1 Set (10 Pieces) CNMG120404MF
Suitable for machining austenitic and duplex stainless steels.
Suitable for both wet and dry.1พบ ผลิตภัณฑ์
JPY: 19,940
USD: 125.08
