[SANDVIK K.K.]เครื่องมือตัด
ตัวกรอง
- ตามกลุ่มผลิตภัณฑ์
- ตามผลิตภัณฑ์
เรียงลําดับตาม:
-
Ceramic Negative Tips for T-Max P Turning (610) 6190 1 set (10 pieces) CNGQ120708T02520WG
Used for high-speed roughing and finishing of cast iron in good working condition.
Supports light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 53,100
USD: 333.08
-
Ceramic Negative Tips for T-Max P Turning (610) 6190 1 set (10 pieces) CNGQ120712T02520
Used for high-speed roughing and finishing of cast iron in good working condition.
Supports light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 43,000
USD: 269.73
-
Ceramic Negative Tips for T-Max P Turning (610) 6190 1 set (10 pieces) CNGQ120716T02520
Used for high-speed roughing and finishing of cast iron in good working condition.
Supports light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 46,100
USD: 289.17
-
CBN Negative Tips for T-Max P Turning (620) 7025 1 Set (5 Pieces) CNGX1204L02518AXA
It is a material type with medium CBN content that exhibits high machining performance.
For general turning high hardness steel machining.1พบ ผลิตภัณฑ์
JPY: 131,800
USD: 826.75
-
CBN Negative Tips for T-Max P Turning (620) 7105 1 Set (5 Pieces) CNGX1204L02518HXA
It is the first recommended CBN material type for continuous cutting of solder hardened steel and high frequency hardened steel in low feed stable condition.
For general turning high hardness steel machining.1พบ ผลิตภัณฑ์
JPY: 126,400
USD: 792.87
-
CBN Negative Tips for T-Max P Turning (620) 7115 1 Set (5 Pieces) CNGX1204L02518HXA
This is the first recommended CBN material type for high feed or continuous cutting and light intermittent cutting at high cutting speed with large cut depth.
For general turning high hardness steel machining.1พบ ผลิตภัณฑ์
JPY: 126,400
USD: 792.87
-
T-MAXP Tips CBN (620) 7125 1 Set (5 Pieces) CNGX1204L02518HXA
Precision grade CBN chip.
Non-coated.1พบ ผลิตภัณฑ์
JPY: 126,400
USD: 792.87
-
Ceramic Negative Tips for T-Max P Turning (610) 6190 1 set (10 pieces) CNGX120712T02520
Used for high-speed roughing and finishing of cast iron in good working condition.
Supports light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 46,100
USD: 289.17
-
Ceramic Negative Tips for T-Max P Turning (610) 6190 1 set (10 pieces) CNGX120716T02520
Used for high-speed roughing and finishing of cast iron in good working condition.
Supports light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 46,100
USD: 289.17
-
Negative Tips for T-Max P Turning (110) 3205 1 Set (10 Pieces) CNMA120404KR
CVD coated carbide type for outer diameter and general inner diameter machining of small parts.
For general turning cast iron processing.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) 3210 1 Set (10 Pieces) CNMA120404KR
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 20,040
USD: 125.71
-
Negative Tips for T-Max P Turning (110) 3225 1 Set (10 Pieces) CNMA120404KR
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 20,040
USD: 125.71
-
CBN Negative Tips for T-Max P Turning (620) CB 20 1 Set (5 Pieces) CNMA120404S01020E
It is the first recommended material type for continuous cutting and intermittent light cutting of high hardness steel.
For general turning high hardness steel machining.1พบ ผลิตภัณฑ์
JPY: 53,000
USD: 332.46
-
Negative Tips for T-Max P Turning (110) 3205 1 Set (10 Pieces) CNMA120408KR
CVD coated carbide type for outer diameter and general inner diameter machining of small parts.
For general turning cast iron processing.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) 3210 1 Set (10 Pieces) CNMA120408KR
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 20,040
USD: 125.71
-
Negative Tips for T-Max P Turning (110) 3225 1 Set (10 Pieces) CNMA120408KR
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 20,040
USD: 125.71
-
CBN Negative Tips for T-Max P Turning (620) CB 20 1 Set (5 Pieces) CNMA120408S01020E
It is the first recommended material type for continuous cutting and intermittent light cutting of high hardness steel.
For general turning high hardness steel machining.1พบ ผลิตภัณฑ์
JPY: 56,600
USD: 355.04
-
Negative Tips for T-Max P Turning (110) 3205 1 Set (10 Pieces) CNMA120412KR
CVD coated carbide type for outer diameter and general inner diameter machining of small parts.
For general turning cast iron processing.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) 3210 1 Set (10 Pieces) CNMA120412KR
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 20,040
USD: 125.71
-
Negative Tips for T-Max P Turning (110) 3225 1 Set (10 Pieces) CNMA120412KR
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 20,040
USD: 125.71
-
Negative Tips for T-Max P Turning (110) 3205 1 Set (10 Pieces) CNMA120416KR
CVD coated carbide type for outer diameter and general inner diameter machining of small parts.
For general turning cast iron processing.1พบ ผลิตภัณฑ์
JPY: 20,210
USD: 126.77
-
Negative Tips for T-Max P Turning (110) 3210 1 Set (10 Pieces) CNMA120416KR
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 20,040
USD: 125.71
-
Negative Tips for T-Max P Turning (110) 3225 1 Set (10 Pieces) CNMA120416KR
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 20,040
USD: 125.71
-
Negative Tips for T-Max P Turning (110) 3205 1 Set (10 Pieces) CNMA160612KR
CVD coated carbide type for outer diameter and general inner diameter machining of small parts.
For general turning cast iron processing.1พบ ผลิตภัณฑ์
JPY: 31,860
USD: 199.85
-
Negative Tips for T-Max P Turning (110) 3210 1 Set (10 Pieces) CNMA160612KR
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 31,580
USD: 198.09
-
Negative Tips for T-Max P Turning (110) 3225 1 Set (10 Pieces) CNMA160612KR
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 31,580
USD: 198.09
-
Negative Tips for T-Max P Turning (110) 3210 1 Set (10 Pieces) CNMA160616KR
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 31,580
USD: 198.09
-
Negative Tips for T-Max P Turning (110) 3225 1 Set (10 Pieces) CNMA160616KR
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 31,580
USD: 198.09
-
Negative Tips for T-Max P Turning (110) 3210 1 Set (10 Pieces) CNMA190608KR
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 44,090
USD: 276.57
-
Negative Tips for T-Max P Turning (110) 3225 1 Set (10 Pieces) CNMA190608KR
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 44,090
USD: 276.57
-
Negative Tips for T-Max P Turning (110) 3205 1 Set (10 Pieces) CNMA190612KR
CVD coated carbide type for outer diameter and general inner diameter machining of small parts.
For general turning cast iron processing.1พบ ผลิตภัณฑ์
JPY: 44,580
USD: 279.64
-
Negative Tips for T-Max P Turning (110) 3210 1 Set (10 Pieces) CNMA190612KR
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 44,090
USD: 276.57
-
Negative Tips for T-Max P Turning (110) 3225 1 Set (10 Pieces) CNMA190612KR
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 44,090
USD: 276.57
-
Negative Tips for T-Max P Turning (110) 3205 1 Set (10 Pieces) CNMA190616KR
CVD coated carbide type for outer diameter and general inner diameter machining of small parts.
For general turning cast iron processing.1พบ ผลิตภัณฑ์
JPY: 44,580
USD: 279.64
-
Negative Tips for T-Max P Turning (110) 3210 1 Set (10 Pieces) CNMA190616KR
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 44,090
USD: 276.57
-
Negative Tips for T-Max P Turning (110) 3225 1 Set (10 Pieces) CNMA190616KR
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 44,090
USD: 276.57
-
Negative Tips for T-Max P Turning (110) 3210 1 Set (10 Pieces) CNMA190624KR
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 44,090
USD: 276.57
-
Negative Tips for T-Max P Turning (110) 3225 1 Set (10 Pieces) CNMA190624KR
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 44,090
USD: 276.57
-
Negative Tips for T-Max P Turning (110) 1115 1 Set (10 Pieces) CNMG090304MF
Sharp cutting blade and adhesion to ultrafine particle base material, high high temperature hardness and excellent plastic deformation combined with excellent cutting blade reliability.
Achieved uniform surface wear and high machining performance.1พบ ผลิตภัณฑ์
JPY: 13,200
USD: 82.80
-
Negative Tips for T-Max P Turning (110) 1125 1 Set (10 Pieces) CNMG090304MF
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 13,200
USD: 82.80
