[SANDVIK K.K.]เครื่องมือตัด
ตัวกรอง
- ตามกลุ่มผลิตภัณฑ์
- ตามผลิตภัณฑ์
เรียงลําดับตาม:
-
Coroturn 107 Turning Positive Tip (120) 3210 1 Set (10 Pieces) CCMT120404KM
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 22,530
USD: 141.33
-
Coroturn 107 Turning Positive Tip (120) 3225 1 Set (10 Pieces) CCMT120404KM
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 22,530
USD: 141.33
-
Coroturn 107 Turning Positive Tip (120) H 13 A1 Set (10 Pieces) CCMT120404KM
Excellent wear resistance and toughness.
For general turning cast iron and non-ferrous metal processing.1พบ ผลิตภัณฑ์
JPY: 16,480
USD: 103.38
-
Coroturn 107 Turning Positive Tip (120) 1115 1 Set (10 Pieces) CCMT120404MF
Sharp cutting blade and adhesion to ultrafine particle base material, high high temperature hardness and excellent plastic deformation combined with excellent cutting blade reliability.
Achieved uniform surface wear and high machining performance.1พบ ผลิตภัณฑ์
JPY: 22,730
USD: 142.58
-
Coroturn 107 Turning Positive Tip (120) 1125 1 Set (10 Pieces) CCMT120404MF
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 22,730
USD: 142.58
-
Coroturn 107 Turning Positive Tip (120) 2015 1 Set (10 Pieces) CCMT120404MF
First recommended material type for continuous cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 21,760
USD: 136.50
-
Coroturn 107 Turning Positive Tip (120) 2025 1 Set (10 Pieces) CCMT120404MF
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 21,760
USD: 136.50
-
Coroturn 107 Turning Positive Tip (122) 2220 1 Set (10 Pieces) CCMT120404MF
Suitable for machining austenitic and duplex stainless steels.
Suitable for both wet and dry.1พบ ผลิตภัณฑ์
JPY: 22,440
USD: 140.76
-
Coroturn 107 Turning Positive Tip (120) 1105 1 Set (10 Pieces) CCMT120404MM
Sharp cutting blade with high machining performance and high toughness.
Suitable for finishing stainless steel at high cutting speed.1พบ ผลิตภัณฑ์
JPY: 22,730
USD: 142.58
-
Coroturn 107 Turning Positive Tip (120) 1115 1 Set (10 Pieces) CCMT120404MM
Sharp cutting blade and adhesion to ultrafine particle base material, high high temperature hardness and excellent plastic deformation combined with excellent cutting blade reliability.
Achieved uniform surface wear and high machining performance.1พบ ผลิตภัณฑ์
JPY: 22,730
USD: 142.58
-
Coroturn 107 Turning Positive Tip (120) 1125 1 Set (10 Pieces) CCMT120404MM
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 22,730
USD: 142.58
-
Coroturn 107 Turning Positive Tip (120) 2015 1 Set (10 Pieces) CCMT120404MM
First recommended material type for continuous cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 21,760
USD: 136.50
-
Coroturn 107 Turning Positive Tip (120) 2025 1 Set (10 Pieces) CCMT120404MM
Excellent cutting edge reliability, for intermittent cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 21,760
USD: 136.50
-
Coroturn 107 Turning Positive Tip (120) 2035 1 Set (10 Pieces) CCMT120404MM
Excellent heat-resistant shock resistance, for high-speed intermittent machining.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 21,280
USD: 133.48
-
Coroturn 107 Turning Positive Tip (122) 2220 1 Set (10 Pieces) CCMT120404MM
Suitable for machining austenitic and duplex stainless steels.
Suitable for both wet and dry.1พบ ผลิตภัณฑ์
JPY: 22,440
USD: 140.76
-
Coroturn 107 Turning Positive Tip (120) 1515 1 Set (10 Pieces) CCMT120404PF
Suitable for cases where excellent machined surface roughness and sharp cutting edge are required.
Excellent impact resistance for light cutting and intermittent machining.1พบ ผลิตภัณฑ์
JPY: 22,730
USD: 142.58
-
Coroturn 107 Turning Positive Tip (122) 4415 1 Set (10 Pieces) CCMT120404PF
This material type is suitable for processing that requires heat resistance.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 24,160
USD: 151.55
-
Coroturn 107 Turning Positive Tip (122) 4425 1 Set (10 Pieces) CCMT120404PF
Compatible with most steel turning operations.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 24,160
USD: 151.55
-
Coroturn 107 Turning Positive Tip (120) 5015 1 Set (10 Pieces) CCMT120404PF
Constructed cutting edge and excellent resistance to plastic deformation.
For general turning steel.1พบ ผลิตภัณฑ์
JPY: 20,700
USD: 129.85
-
Coroturn 107 Turning Positive Tip (122) 4335 1 Set (10 Pieces) CCMT120404PM
Coating material type for steel and cast steel in unstable working condition.
High cutting edge reliability and excellent chip discharge in intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 23,400
USD: 146.78
-
Coroturn 107 Turning Positive Tip (122) 4415 1 Set (10 Pieces) CCMT120404PM
This material type is suitable for processing that requires heat resistance.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 24,160
USD: 151.55
-
Coroturn 107 Turning Positive Tip (122) 4425 1 Set (10 Pieces) CCMT120404PM
Compatible with most steel turning operations.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 24,160
USD: 151.55
-
Coroturn 107 Turning Positive Tip (120) 5015 1 Set (10 Pieces) CCMT120404PM
Constructed cutting edge and excellent resistance to plastic deformation.
For general turning steel.1พบ ผลิตภัณฑ์
JPY: 20,700
USD: 129.85
-
Coroturn 107 Turning Positive Tip (120) 1115 1 Set (10 Pieces) CCMT120404WM
Sharp cutting blade and adhesion to ultrafine particle base material, high high temperature hardness and excellent plastic deformation combined with excellent cutting blade reliability.
Achieved uniform surface wear and high machining performance.1พบ ผลิตภัณฑ์
JPY: 26,190
USD: 164.28
-
Coroturn 107 Turning Positive Tip (120) 2015 1 Set (10 Pieces) CCMT120404WM
First recommended material type for continuous cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 25,130
USD: 157.63
-
Coroturn 107 Turning Positive Tip (120) 3005 1 Set (10 Pieces) CCMT120404WM
CVD coated carbide material with excellent abrasion resistance and heat resistance.
For general turning cast iron processing.1พบ ผลิตภัณฑ์
JPY: 23,790
USD: 149.23
-
Coroturn 107 Turning Positive Tip (120) 3225 1 Set (10 Pieces) CCMT120404WM
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 25,900
USD: 162.46
-
Coroturn 107 Turning Positive Tip (122) 4415 1 Set (10 Pieces) CCMT120404WM
This material type is suitable for processing that requires heat resistance.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 27,830
USD: 174.57
-
Coroturn 107 Turning Positive Tip (122) 4425 1 Set (10 Pieces) CCMT120404WM
Compatible with most steel turning operations.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 27,830
USD: 174.57
-
Coroturn 107 Turning Positive Tip (120) 3005 1 Set (10 Pieces) CCMT120408KM
CVD coated carbide material with excellent abrasion resistance and heat resistance.
For general turning cast iron processing.1พบ ผลิตภัณฑ์
JPY: 20,700
USD: 129.85
-
Coroturn 107 Turning Positive Tip (120) 3210 1 Set (10 Pieces) CCMT120408KM
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 22,530
USD: 141.33
-
Coroturn 107 Turning Positive Tip (120) 3225 1 Set (10 Pieces) CCMT120408KM
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 22,530
USD: 141.33
-
Coroturn 107 Turning Positive Tip (120) H 13 A1 Set (10 Pieces) CCMT120408KM
Excellent wear resistance and toughness.
For general turning cast iron and non-ferrous metal processing.1พบ ผลิตภัณฑ์
JPY: 16,480
USD: 103.38
-
Coroturn 107 Turning Positive Tip (120) 3205 1 Set (10 Pieces) CCMT120408KR
CVD coated carbide type for outer diameter and general inner diameter machining of small parts.
For general turning cast iron processing.1พบ ผลิตภัณฑ์
JPY: 22,530
USD: 141.33
-
Coroturn 107 Turning Positive Tip (120) 3210 1 Set (10 Pieces) CCMT120408KR
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 22,530
USD: 141.33
-
Coroturn 107 Turning Positive Tip (120) 3225 1 Set (10 Pieces) CCMT120408KR
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 22,530
USD: 141.33
-
Coroturn 107 Turning Positive Tip (120) H 13 A1 Set (10 Pieces) CCMT120408KR
Excellent wear resistance and toughness.
For general turning cast iron and non-ferrous metal processing.1พบ ผลิตภัณฑ์
JPY: 16,480
USD: 103.38
-
Coroturn 107 Turning Positive Tip (120) 1105 1 Set (10 Pieces) CCMT120408MM
Sharp cutting blade with high machining performance and high toughness.
Suitable for finishing stainless steel at high cutting speed.1พบ ผลิตภัณฑ์
JPY: 22,730
USD: 142.58
-
Coroturn 107 Turning Positive Tip (120) 1115 1 Set (10 Pieces) CCMT120408MM
Sharp cutting blade and adhesion to ultrafine particle base material, high high temperature hardness and excellent plastic deformation combined with excellent cutting blade reliability.
Achieved uniform surface wear and high machining performance.1พบ ผลิตภัณฑ์
JPY: 22,730
USD: 142.58
-
Coroturn 107 Turning Positive Tip (120) 1125 1 Set (10 Pieces) CCMT120408MM
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 22,730
USD: 142.58
