[SANDVIK K.K.]เครื่องมือตัด
ตัวกรอง
- ตามกลุ่มผลิตภัณฑ์
- ตามผลิตภัณฑ์
เรียงลําดับตาม:
-
Coroturn 107 Turning Positive Tip (120) 1525 1 Set (10 Pieces) CCMT060204PM
Excellent abrasion resistance and good cutting edge toughness.
For general turning steel machining.1พบ ผลิตภัณฑ์
JPY: 12,710
USD: 79.73
-
Coroturn 107 Turning Positive Tip (122) 4335 1 Set (10 Pieces) CCMT060204PM
Coating material type for steel and cast steel in unstable working condition.
High cutting edge reliability and excellent chip discharge in intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 14,450
USD: 90.64
-
Coroturn 107 Turning Positive Tip (122) 4415 1 Set (10 Pieces) CCMT060204PM
This material type is suitable for processing that requires heat resistance.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 14,930
USD: 93.65
-
Coroturn 107 Turning Positive Tip (122) 4425 1 Set (10 Pieces) CCMT060204PM
Compatible with most steel turning operations.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 14,930
USD: 93.65
-
Coroturn 107 Turning Positive Tip (120) 5015 1 Set (10 Pieces) CCMT060204PM
Constructed cutting edge and excellent resistance to plastic deformation.
For general turning steel.1พบ ผลิตภัณฑ์
JPY: 12,710
USD: 79.73
-
Coroturn 107 Turning Positive Tip (130) 1125 1 Set (10 Pieces) CCMT060204UF
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 14,050
USD: 88.13
-
Coroturn 107 Turning Positive Tip (130) 1515 1 Set (10 Pieces) CCMT060204UF
Suitable for cases where excellent machined surface roughness and sharp cutting edge are required.
Excellent impact resistance for light cutting and intermittent machining.1พบ ผลิตภัณฑ์
JPY: 14,050
USD: 88.13
-
Coroturn 107 Turning Positive Tip (130) 235 1 Set (10 Pieces) CCMT060204UF
It is a material type with high toughness and edge strength.
Ideal for low speed intermittent machining.1พบ ผลิตภัณฑ์
JPY: 12,710
USD: 79.73
-
Coroturn 107 Turning Positive Tip (122) 4335 1 Set (10 Pieces) CCMT060204UF
Coating material type for steel and cast steel in unstable working condition.
High cutting edge reliability and excellent chip discharge in intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 14,450
USD: 90.64
-
Coroturn 107 Turning Positive Tip (122) 4415 1 Set (10 Pieces) CCMT060204UF
This material type is suitable for processing that requires heat resistance.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 14,930
USD: 93.65
-
Coroturn 107 Turning Positive Tip (122) 4425 1 Set (10 Pieces) CCMT060204UF
Compatible with most steel turning operations.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 14,930
USD: 93.65
-
Coroturn 107 Turning Positive Tip (130) 5015 1 Set (10 Pieces) CCMT060204UF
Constructed cutting edge and excellent resistance to plastic deformation.
For general turning steel.1พบ ผลิตภัณฑ์
JPY: 12,710
USD: 79.73
-
Coroturn 107 Turning Positive Tip (130) 1115 1 Set (10 Pieces) CCMT060204UM
Sharp cutting blade and adhesion to ultrafine particle base material, high high temperature hardness and excellent plastic deformation combined with excellent cutting blade reliability.
Achieved uniform surface wear and high machining performance.1พบ ผลิตภัณฑ์
JPY: 14,050
USD: 88.13
-
Coroturn 107 Turning Positive Tip (130) 1125 1 Set (10 Pieces) CCMT060204UM
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 14,050
USD: 88.13
-
Coroturn 107 Turning Positive Tip (130) 1515 1 Set (10 Pieces) CCMT060204UM
Suitable for cases where excellent machined surface roughness and sharp cutting edge are required.
Excellent impact resistance for light cutting and intermittent machining.1พบ ผลิตภัณฑ์
JPY: 14,050
USD: 88.13
-
Coroturn 107 Turning Positive Tip (130) 1525 1 Set (10 Pieces) CCMT060204UM
Excellent abrasion resistance and good cutting edge toughness.
For general turning steel machining.1พบ ผลิตภัณฑ์
JPY: 12,710
USD: 79.73
-
Coroturn 107 Turning Positive Tip (130) 235 1 Set (10 Pieces) CCMT060204UM
It is a material type with high toughness and edge strength.
Ideal for low speed intermittent machining.1พบ ผลิตภัณฑ์
JPY: 12,710
USD: 79.73
-
Coroturn 107 Turning Positive Tip (122) 4335 1 Set (10 Pieces) CCMT060204UM
Coating material type for steel and cast steel in unstable working condition.
High cutting edge reliability and excellent chip discharge in intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 14,450
USD: 90.64
-
Coroturn 107 Turning Positive Tip (122) 4415 1 Set (10 Pieces) CCMT060204UM
This material type is suitable for processing that requires heat resistance.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 14,930
USD: 93.65
-
Coroturn 107 Turning Positive Tip (122) 4425 1 Set (10 Pieces) CCMT060204UM
Compatible with most steel turning operations.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 14,930
USD: 93.65
-
Coroturn 107 Turning Positive Tip (130) 5015 1 Set (10 Pieces) CCMT060204UM
Constructed cutting edge and excellent resistance to plastic deformation.
For general turning steel.1พบ ผลิตภัณฑ์
JPY: 12,710
USD: 79.73
-
Coroturn 107 Turning Positive Tip (130) 235 1 Set (10 Pieces) CCMT060204UR
It is a material type with high toughness and edge strength.
Ideal for low speed intermittent machining.1พบ ผลิตภัณฑ์
JPY: 12,710
USD: 79.73
-
Coroturn 107 Turning Positive Tip (120) 1115 1 Set (10 Pieces) CCMT060204WF
Sharp cutting blade and adhesion to ultrafine particle base material, high high temperature hardness and excellent plastic deformation combined with excellent cutting blade reliability.
Achieved uniform surface wear and high machining performance.1พบ ผลิตภัณฑ์
JPY: 16,090
USD: 100.93
-
Coroturn 107 Turning Positive Tip (120) 1125 1 Set (10 Pieces) CCMT060204WF
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 16,090
USD: 100.93
-
Coroturn 107 Turning Positive Tip (120) 1515 1 Set (10 Pieces) CCMT060204WF
Suitable for cases where excellent machined surface roughness and sharp cutting edge are required.
Excellent impact resistance for light cutting and intermittent machining.1พบ ผลิตภัณฑ์
JPY: 16,090
USD: 100.93
-
Coroturn 107 Turning Positive Tip (120) 1525 1 Set (10 Pieces) CCMT060204WF
Excellent abrasion resistance and good cutting edge toughness.
For general turning steel machining.1พบ ผลิตภัณฑ์
JPY: 14,540
USD: 91.21
-
Coroturn 107 Turning Positive Tip (120) 2015 1 Set (10 Pieces) CCMT060204WF
First recommended material type for continuous cutting.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 15,310
USD: 96.04
-
Coroturn 107 Turning Positive Tip (120) 3005 1 Set (10 Pieces) CCMT060204WF
CVD coated carbide material with excellent abrasion resistance and heat resistance.
For general turning cast iron processing.1พบ ผลิตภัณฑ์
JPY: 14,540
USD: 91.21
-
Coroturn 107 Turning Positive Tip (120) 3210 1 Set (10 Pieces) CCMT060204WF
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 15,890
USD: 99.67
-
Coroturn 107 Turning Positive Tip (120) 3225 1 Set (10 Pieces) CCMT060204WF
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 15,890
USD: 99.67
-
Coroturn 107 Turning Positive Tip (122) 4415 1 Set (10 Pieces) CCMT060204WF
This material type is suitable for processing that requires heat resistance.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 17,140
USD: 107.52
-
Coroturn 107 Turning Positive Tip (122) 4425 1 Set (10 Pieces) CCMT060204WF
Compatible with most steel turning operations.
For turning steel processing.1พบ ผลิตภัณฑ์
JPY: 17,140
USD: 107.52
-
Coroturn 107 Turning Positive Tip (120) 5015 1 Set (10 Pieces) CCMT060204WF
Constructed cutting edge and excellent resistance to plastic deformation.
For general turning steel.1พบ ผลิตภัณฑ์
JPY: 14,540
USD: 91.21
-
Coroturn 107 Turning Positive Tip (120) 3005 1 Set (10 Pieces) CCMT060208KM
CVD coated carbide material with excellent abrasion resistance and heat resistance.
For general turning cast iron processing.1พบ ผลิตภัณฑ์
JPY: 12,710
USD: 79.73
-
Coroturn 107 Turning Positive Tip (120) 3210 1 Set (10 Pieces) CCMT060208KM
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 13,860
USD: 86.94
-
Coroturn 107 Turning Positive Tip (120) 3225 1 Set (10 Pieces) CCMT060208KM
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 13,860
USD: 86.94
-
Coroturn 107 Turning Positive Tip (120) H 13 A1 Set (10 Pieces) CCMT060208KM
Excellent wear resistance and toughness.
For general turning cast iron and non-ferrous metal processing.1พบ ผลิตภัณฑ์
JPY: 10,130
USD: 63.54
-
Coroturn 107 Turning Positive Tip (120) 3210 1 Set (10 Pieces) CCMT060208KR
Provides high flank wear resistance.
This material type is suitable for both continuous and intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 13,860
USD: 86.94
-
Coroturn 107 Turning Positive Tip (120) 3225 1 Set (10 Pieces) CCMT060208KR
CVD coated carbide material with high edge reliability.
A material type suitable for light to heavy intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 13,860
USD: 86.94
-
Coroturn 107 Turning Positive Tip (120) H 13 A1 Set (10 Pieces) CCMT060208KR
Excellent wear resistance and toughness.
For general turning cast iron and non-ferrous metal processing.1พบ ผลิตภัณฑ์
JPY: 10,130
USD: 63.54
