[SANDVIK K.K.]เครื่องมือตัด
ตัวกรอง
- ตามกลุ่มผลิตภัณฑ์
- ตามผลิตภัณฑ์
เรียงลําดับตาม:
-
Coroturn 107 Turning Positive Tip (130) 5015 1 Set (10 Pieces) CCGT09T302UM
Constructed cutting edge and excellent resistance to plastic deformation.
For general turning steel.1พบ ผลิตภัณฑ์
JPY: 31,290
USD: 196.27
-
Coroturn 107 Turning Positive Tip (130) H 13 A1 Set (10 Pieces) CCGT09T302UM
Excellent wear resistance and toughness.
For general turning cast iron and non-ferrous metal processing.1พบ ผลิตภัณฑ์
JPY: 25,040
USD: 157.07
-
Coroturn 107 Turning Positive Tip (130) 1105 1 Set (10 Pieces) CCGT09T304UM
Sharp cutting blade with high machining performance and high toughness.
Suitable for finishing stainless steel at high cutting speed.1พบ ผลิตภัณฑ์
JPY: 30,040
USD: 188.43
-
Coroturn 107 Turning Positive Tip (130) 1115 1 Set (10 Pieces) CCGT09T304UM
Sharp cutting blade and adhesion to ultrafine particle base material, high high temperature hardness and excellent plastic deformation combined with excellent cutting blade reliability.
Achieved uniform surface wear and high machining performance.1พบ ผลิตภัณฑ์
JPY: 30,030
USD: 188.37
-
Coroturn 107 Turning Positive Tip (130) 1125 1 Set (10 Pieces) CCGT09T304UM
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 30,030
USD: 188.37
-
Coroturn 107 Turning Positive Tip (130) 1515 1 Set (10 Pieces) CCGT09T304UM
Suitable for cases where excellent machined surface roughness and sharp cutting edge are required.
Excellent impact resistance for light cutting and intermittent machining.1พบ ผลิตภัณฑ์
JPY: 30,030
USD: 188.37
-
Coroturn 107 Turning Positive Tip (130) 5015 1 Set (10 Pieces) CCGT09T304UM
Constructed cutting edge and excellent resistance to plastic deformation.
For general turning steel.1พบ ผลิตภัณฑ์
JPY: 27,340
USD: 171.50
-
Coroturn 107 Turning Positive Tip (130) H 13 A1 Set (10 Pieces) CCGT09T304UM
Excellent wear resistance and toughness.
For general turning cast iron and non-ferrous metal processing.1พบ ผลิตภัณฑ์
JPY: 21,660
USD: 135.87
-
Coroturn 107 Turning Positive Tip (130) 1105 1 Set (10 Pieces) CCGT09T308UM
Sharp cutting blade with high machining performance and high toughness.
Suitable for finishing stainless steel at high cutting speed.1พบ ผลิตภัณฑ์
JPY: 30,030
USD: 188.37
-
Coroturn 107 Turning Positive Tip (130) 1115 1 Set (10 Pieces) CCGT09T308UM
Sharp cutting blade and adhesion to ultrafine particle base material, high high temperature hardness and excellent plastic deformation combined with excellent cutting blade reliability.
Achieved uniform surface wear and high machining performance.1พบ ผลิตภัณฑ์
JPY: 30,030
USD: 188.37
-
Coroturn 107 Turning Positive Tip (130) 1125 1 Set (10 Pieces) CCGT09T308UM
Excellent function when fusion of smooth cutting with excellent cutting edge toughness or machined surface roughness is required.
Superior heat-resistant impact resistance and suitable for light intermittent cutting.1พบ ผลิตภัณฑ์
JPY: 30,030
USD: 188.37
-
Coroturn 107 Turning Positive Tip (130) 1515 1 Set (10 Pieces) CCGT09T308UM
Suitable for cases where excellent machined surface roughness and sharp cutting edge are required.
Excellent impact resistance for light cutting and intermittent machining.1พบ ผลิตภัณฑ์
JPY: 30,030
USD: 188.37
-
Coroturn 107 Turning Positive Tip (130) 2035 1 Set (10 Pieces) CCGT09T308UM
Excellent heat-resistant shock resistance, for high-speed intermittent machining.
For general turning stainless steel machining.1พบ ผลิตภัณฑ์
JPY: 28,110
USD: 176.33
-
Coroturn 107 Turning Positive Tip (130) 5015 1 Set (10 Pieces) CCGT09T308UM
Constructed cutting edge and excellent resistance to plastic deformation.
For general turning steel.1พบ ผลิตภัณฑ์
JPY: 27,340
USD: 171.50
-
Coroturn 107 Turning Positive Tip (130) H 13 A1 Set (10 Pieces) CCGT09T308UM
Excellent wear resistance and toughness.
For general turning cast iron and non-ferrous metal processing.1พบ ผลิตภัณฑ์
JPY: 21,660
USD: 135.87
-
Coroturn 107 Turning Positive Tip (130) H 10 A1 Set (10 Pieces) CCGT120404UM
Excellent abrasion resistance and toughness.
For general turning non-ferrous metal and heat-resistant alloy processing.1พบ ผลิตภัณฑ์
JPY: 30,510
USD: 191.38
-
Coroturn 107 Turning Positive Tip (130) H 10 A1 Set (10 Pieces) CCGT120408UM
Excellent abrasion resistance and toughness.
For general turning non-ferrous metal and heat-resistant alloy processing.1พบ ผลิตภัณฑ์
JPY: 30,510
USD: 191.38
-
CBN Positive Tip for Turning Coroturn 107 (620) 7115 1 Set (5 Pieces) CCGW060202S01020F
This is the first recommended CBN material type for high feed or continuous cutting and light intermittent cutting at high cutting speed with large cut depth.
For general turning high hardness steel machining.1พบ ผลิตภัณฑ์
JPY: 42,500
USD: 266.59
-
Coroturn 107 Tip CBN (620) 7125 1 Set (5 Pieces) CCGW060202T01020F
Precision grade CBN chip.
The latest PVD coating.1พบ ผลิตภัณฑ์
JPY: 42,500
USD: 266.59
-
CBN Positive Tip for Turning Coroturn 107 (620) 7015 1 Set (5 Pieces) CCGW060202T01030F
It is a material type with low CBN content that exhibits high machining performance.
For general turning high hardness steel machining.1พบ ผลิตภัณฑ์
JPY: 44,400
USD: 278.51
-
CBN Positive Tip for Turning Coroturn 107 (620) 7025 1 Set (5 Pieces) CCGW060202T01030F
It is a material type with medium CBN content that exhibits high machining performance.
For general turning high hardness steel machining.1พบ ผลิตภัณฑ์
JPY: 44,400
USD: 278.51
-
CBN Positive Tip for Turning Coroturn 107 (620) 7015 1 Set (5 Pieces) CCGW060204S01020F
It is a material type with low CBN content that exhibits high machining performance.
For general turning high hardness steel machining.1พบ ผลิตภัณฑ์
JPY: 44,400
USD: 278.51
-
CBN Positive Tip for Turning Coroturn 107 (620) 7025 1 Set (5 Pieces) CCGW060204S01020F
It is a material type with medium CBN content that exhibits high machining performance.
For general turning high hardness steel machining.1พบ ผลิตภัณฑ์
JPY: 44,400
USD: 278.51
-
CBN Positive Tip for Turning Coroturn 107 (620) 7105 1 Set (5 Pieces) CCGW060204S01020F
It is the first recommended CBN material type for continuous cutting of solder hardened steel and high frequency hardened steel in low feed stable condition.
For general turning high hardness steel machining.1พบ ผลิตภัณฑ์
JPY: 42,500
USD: 266.59
-
CBN Positive Tip for Turning Coroturn 107 (620) 7115 1 Set (5 Pieces) CCGW060204S01020F
This is the first recommended CBN material type for high feed or continuous cutting and light intermittent cutting at high cutting speed with large cut depth.
For general turning high hardness steel machining.1พบ ผลิตภัณฑ์
JPY: 42,500
USD: 266.59
-
Coroturn 107 Tip CBN (620) 7125 1 Set (5 Pieces) CCGW060204S01020F
Precision grade CBN chip.
The latest PVD coating.1พบ ผลิตภัณฑ์
JPY: 42,500
USD: 266.59
-
Coroturn 107 Turning CBN Positive Tip (620) 1 Set (5 Pieces) CCGW060204S01030F
Excellent cutting edge toughness makes it ideal as an auxiliary material for intermittent machining of high hardness steel.
It is a very hard type of CBN material.1พบ ผลิตภัณฑ์
JPY: 44,400
USD: 278.51
-
CBN Positive Tip for Turning Coroturn 107 (620) 7015 1 Set (5 Pieces) CCGW060204S01030F
It is a material type with low CBN content that exhibits high machining performance.
For general turning high hardness steel machining.1พบ ผลิตภัณฑ์
JPY: 44,400
USD: 278.51
-
CBN Positive Tip for Turning Coroturn 107 (620) 7025 1 Set (5 Pieces) CCGW060204S01030F
It is a material type with medium CBN content that exhibits high machining performance.
For general turning high hardness steel machining.1พบ ผลิตภัณฑ์
JPY: 44,400
USD: 278.51
-
CBN Positive Tip for Turning Coroturn 107 (620) 7105 1 Set (5 Pieces) CCGW060204S01520FWH
It is the first recommended CBN material type for continuous cutting of solder hardened steel and high frequency hardened steel in low feed stable condition.
For general turning high hardness steel machining.1พบ ผลิตภัณฑ์
JPY: 48,900
USD: 306.74
-
CBN Positive Tip for Turning Coroturn 107 (620) 7115 1 Set (5 Pieces) CCGW060204S01520FWH
This is the first recommended CBN material type for high feed or continuous cutting and light intermittent cutting at high cutting speed with large cut depth.
For general turning high hardness steel machining.1พบ ผลิตภัณฑ์
JPY: 48,900
USD: 306.74
-
Coroturn 107 Tip CBN (620) 7135 1 Set (5 Pieces) CCGW060204S01530F
Precision grade CBN chip.
Non-coated.1พบ ผลิตภัณฑ์
JPY: 42,500
USD: 266.59
-
Coroturn 107 Turning CBN Positive Tip (620) 1 Set (5 Pieces) CCGW060204T01020F
Excellent cutting edge toughness makes it ideal as an auxiliary material for intermittent machining of high hardness steel.
It is a very hard type of CBN material.1พบ ผลิตภัณฑ์
JPY: 44,400
USD: 278.51
-
CBN Positive Tip for Turning Coroturn 107 (620) 7015 1 Set (5 Pieces) CCGW060204T01030F
It is a material type with low CBN content that exhibits high machining performance.
For general turning high hardness steel machining.1พบ ผลิตภัณฑ์
JPY: 44,400
USD: 278.51
-
CBN Positive Tip for Turning Coroturn 107 (620) 7015 1 Set (5 Pieces) CCGW060204T01030FWH
It is a material type with low CBN content that exhibits high machining performance.
For general turning high hardness steel machining.1พบ ผลิตภัณฑ์
JPY: 51,100
USD: 320.54
-
CBN Positive Tip for Turning Coroturn 107 (620) 7025 1 Set (5 Pieces) CCGW060204T01030FWH
It is a material type with medium CBN content that exhibits high machining performance.
For general turning high hardness steel machining.1พบ ผลิตภัณฑ์
JPY: 51,100
USD: 320.54
-
CBN Positive Tip for Turning Coroturn 107 (620) 7115 1 Set (5 Pieces) CCGW060208S01020F
This is the first recommended CBN material type for high feed or continuous cutting and light intermittent cutting at high cutting speed with large cut depth.
For general turning high hardness steel machining.1พบ ผลิตภัณฑ์
JPY: 42,500
USD: 266.59
-
CBN Positive Tip for Turning Coroturn 107 (620) 7015 1 Set (5 Pieces) CCGW060208S01030F
It is a material type with low CBN content that exhibits high machining performance.
For general turning high hardness steel machining.1พบ ผลิตภัณฑ์
JPY: 44,400
USD: 278.51
-
CBN Positive Tip for Turning Coroturn 107 (620) 7025 1 Set (5 Pieces) CCGW060208S01030F
It is a material type with medium CBN content that exhibits high machining performance.
For general turning high hardness steel machining.1พบ ผลิตภัณฑ์
JPY: 44,400
USD: 278.51
-
CBN Positive Tip for Turning Coroturn 107 (620) 7105 1 Set (5 Pieces) CCGW060208S01520FWH
It is the first recommended CBN material type for continuous cutting of solder hardened steel and high frequency hardened steel in low feed stable condition.
For general turning high hardness steel machining.1พบ ผลิตภัณฑ์
JPY: 48,900
USD: 306.74
