[SANDVIK K.K.]เครื่องมือตัด
ตัวกรอง
- ตามกลุ่มผลิตภัณฑ์
- ตามผลิตภัณฑ์
เรียงลําดับตาม:
-
Coroturn 107 Shank Tool for Small Lathe SCLCL1010K06S
Outer diameter turning holder with low cutting resistance.
High tool stiffness enables stable machining even when cutting conditions are raised.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
-
Coroturn 107 Shank Bit for Positive Tip SCLCL1212F09M
Outer diameter turning tool with stable chip clamp and excellent repetition accuracy.
It is an unobstructed stream of chips.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
-
Coroturn 107 Shank Tool for Small Lathe SCLCL1212K06S
Outer diameter turning holder with low cutting resistance.
High tool stiffness enables stable machining even when cutting conditions are raised.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
-
Coroturn 107 Shank Tool for Small Lathe SCLCL1212K09S
Outer diameter turning holder with low cutting resistance.
High tool stiffness enables stable machining even when cutting conditions are raised.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
-
Coroturn 107 Holder HP SCLCL1616H09HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 35,200
USD: 220.80
-
Coroturn 107 Shank Tool for Small Lathe SCLCL1616K06S
Outer diameter turning holder with low cutting resistance.
High tool stiffness enables stable machining even when cutting conditions are raised.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
-
Coroturn 107 Shank Tool for Small Lathe SCLCL1616K09S
Outer diameter turning holder with low cutting resistance.
High tool stiffness enables stable machining even when cutting conditions are raised.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
-
Coroturn 107 Shank Bit for Positive Tip SCLCL2020K12
Outer diameter turning tool with stable chip clamp and excellent repetition accuracy.
It is an unobstructed stream of chips.1พบ ผลิตภัณฑ์
JPY: 18,000
USD: 112.91
-
Coroturn 107 Shank Bit for Positive Tip SCLCR0808D06
Outer diameter turning tool with stable chip clamp and excellent repetition accuracy.
It is an unobstructed stream of chips.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
-
Coroturn 107 Shank Tool for Small Lathe SCLCR0808K06S
Outer diameter turning holder with low cutting resistance.
High tool stiffness enables stable machining even when cutting conditions are raised.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
-
Coroturn 107 Shank Tool for Small Lathe SCLCR1010K06S
Outer diameter turning holder with low cutting resistance.
High tool stiffness enables stable machining even when cutting conditions are raised.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
-
Coroturn 107 Shank Tool for Small Lathe SCLCR1212K06S
Outer diameter turning holder with low cutting resistance.
High tool stiffness enables stable machining even when cutting conditions are raised.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
-
Coroturn 107 Holder HP (210) SCLCR1616H09HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 34,880
USD: 218.79
-
Coroturn 107 Shank Tool for Small Lathe SCLCR1616K06S
Outer diameter turning holder with low cutting resistance.
High tool stiffness enables stable machining even when cutting conditions are raised.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
-
Coroturn 107 Shank Tool for Small Lathe SCLCR1616K09S
Outer diameter turning holder with low cutting resistance.
High tool stiffness enables stable machining even when cutting conditions are raised.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
-
Coroturn 107 Shank Tool for Small Lathe SDACL0808K07S
Outer diameter turning holder with low cutting resistance.
High tool stiffness enables stable machining even when cutting conditions are raised.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
-
Coroturn 107 Shank Tool for Small Lathe SDACL1010K07S
Outer diameter turning holder with low cutting resistance.
High tool stiffness enables stable machining even when cutting conditions are raised.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
-
Coroturn 107 Shank Tool for Small Lathe SDACL1212K11S
Outer diameter turning holder with low cutting resistance.
High tool stiffness enables stable machining even when cutting conditions are raised.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
-
Coroturn 107 Shank Tool for Small Lathe SDACL1616K11S
Outer diameter turning holder with low cutting resistance.
High tool stiffness enables stable machining even when cutting conditions are raised.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
-
Coroturn 107 Shank Tool for Small Lathe SDACR0808K07S
Outer diameter turning holder with low cutting resistance.
High tool stiffness enables stable machining even when cutting conditions are raised.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
-
Coroturn 107 Shank Tool for Small Lathe SDACR1010K07S
Outer diameter turning holder with low cutting resistance.
High tool stiffness enables stable machining even when cutting conditions are raised.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
-
Coroturn 107 Shank Tool for Small Lathe SDACR1212K11S
Outer diameter turning holder with low cutting resistance.
High tool stiffness enables stable machining even when cutting conditions are raised.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
-
Coroturn 107 Shank Tool for Small Lathe SDACR1616K11S
Outer diameter turning holder with low cutting resistance.
High tool stiffness enables stable machining even when cutting conditions are raised.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
-
Coroturn 107 Shank Tool for Small Lathe SDJCL0808K07S
Outer diameter turning holder with low cutting resistance.
High tool stiffness enables stable machining even when cutting conditions are raised.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
-
Coroturn 107 Shank Bit for Positive Tip SDJCL1010E07
Outer diameter turning tool with stable chip clamp and excellent repetition accuracy.
It is an unobstructed stream of chips.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
-
Coroturn 107 Shank Tool for Small Lathe SDJCL1010K07S
Outer diameter turning holder with low cutting resistance.
High tool stiffness enables stable machining even when cutting conditions are raised.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
-
Coroturn 107 Shank Bit for Positive Tip SDJCL1212F07
Outer diameter turning tool with stable chip clamp and excellent repetition accuracy.
It is an unobstructed stream of chips.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
-
Coroturn 107 Shank Tool for Small Lathe SDJCL1212K07S
Outer diameter turning holder with low cutting resistance.
High tool stiffness enables stable machining even when cutting conditions are raised.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
-
Coroturn 107 Shank Tool for Small Lathe (210) SDJCL1212K11-S
Outer diameter turning holder with low cutting resistance.
High tool stiffness enables stable machining even when cutting conditions are raised.1พบ ผลิตภัณฑ์
JPY: 15,800
USD: 99.11
-
Coroturn 107 Shank Bit for Positive Tip SDJCL1616H07
Outer diameter turning tool with stable chip clamp and excellent repetition accuracy.
It is an unobstructed stream of chips.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
-
Coroturn 107 Shank Bit for Positive Tip SDJCL1616H11
Outer diameter turning tool with stable chip clamp and excellent repetition accuracy.
It is an unobstructed stream of chips.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
-
Coroturn 107 Holder HP SDJCL1616H11HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 35,200
USD: 220.80
-
Coroturn 107 Shank Tool for Small Lathe SDJCL1616K11S
Outer diameter turning holder with low cutting resistance.
High tool stiffness enables stable machining even when cutting conditions are raised.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
-
Coroturn 107 Shank Bit for Positive Tip SDJCL2020K07
Outer diameter turning tool with stable chip clamp and excellent repetition accuracy.
It is an unobstructed stream of chips.1พบ ผลิตภัณฑ์
JPY: 18,000
USD: 112.91
-
Coroturn 107 Holder HP SDJCL3225P11HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 45,500
USD: 285.41
-
Coroturn 107 Shank Tool for Small Lathe SDJCR0808K07S
Outer diameter turning holder with low cutting resistance.
High tool stiffness enables stable machining even when cutting conditions are raised.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
-
Coroturn 107 Shank Bit for Positive Tip SDJCR1010E07
Outer diameter turning tool with stable chip clamp and excellent repetition accuracy.
It is an unobstructed stream of chips.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
-
Coroturn 107 Shank Tool for Small Lathe SDJCR1010K07S
Outer diameter turning holder with low cutting resistance.
High tool stiffness enables stable machining even when cutting conditions are raised.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
-
Coroturn 107 Shank Bit for Positive Tip SDJCR1212F07
Outer diameter turning tool with stable chip clamp and excellent repetition accuracy.
It is an unobstructed stream of chips.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
-
Coroturn 107 Shank Tool for Small Lathe SDJCR1212K07S
Outer diameter turning holder with low cutting resistance.
High tool stiffness enables stable machining even when cutting conditions are raised.1พบ ผลิตภัณฑ์
JPY: 16,100
USD: 100.99
