[SANDVIK K.K.]เครื่องมือตัด
ตัวกรอง
- ตามกลุ่มผลิตภัณฑ์
- ตามผลิตภัณฑ์
เรียงลําดับตาม:
-
Cartridge for T-Max P Negative Tip PTGNL20CA22
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 32,700
USD: 205.12
-
Shank Bit for T-Max P Negative Tip PTGNL2525M11
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 17,500
USD: 109.77
-
Sensaku Holder HP PTGNL2525M16HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 38,300
USD: 240.25
-
Shank Bit for T-Max P Negative Tip PTGNL3232P27
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 23,500
USD: 147.41
-
Shank Bit for T-Max P Negative Tip PTGNL4040S27
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 31,200
USD: 195.71
-
T-Max P Shank Tool for Small Lathe PTGNR1212K11S
Shank Bit for Small Lathe
For Triangle 60°Chip1พบ ผลิตภัณฑ์
JPY: 14,900
USD: 93.46
-
Cartridge for T-Max P Negative Tip PTGNR12CA16
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 26,600
USD: 166.86
-
Shank Bit for T-Max P Negative Tip PTGNR1616H11
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 14,900
USD: 93.46
-
Sensaku Holder HP PTGNR1616H16HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 32,600
USD: 204.49
-
Cartridge for T-Max P Negative Tip PTGNR16CA16
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 26,600
USD: 166.86
-
Cartridge for T-Max P Negative Tip PTGNR20CA22
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 32,700
USD: 205.12
-
Shank Bit for T-Max P Negative Tip PTGNR2525M11
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 17,500
USD: 109.77
-
Sensaku Holder HP PTGNR2525M16HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 37,810
USD: 237.17
-
Shank Bit for T-Max P Negative Tip PTGNR3232P27
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 23,500
USD: 147.41
-
Shank Bit for T-Max P Negative Tip PTGNR4040S27
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 31,200
USD: 195.71
-
Cartridge for T-Max P Negative Tip PTSNL12CA16
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 26,600
USD: 166.86
-
Cartridge for T-Max P Negative Tip PTSNR12CA16
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 26,600
USD: 166.86
-
Cartridge for T-Max P Negative Tip PTSNR16CA16
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 26,600
USD: 166.86
-
Cartridge for T-Max P Negative Tip PTTNL12CA16
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 26,600
USD: 166.86
-
Shank Bit for T-Max P Negative Tip PTTNL2525M22
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 17,500
USD: 109.77
-
Cartridge for T-Max P Negative Tip PTTNR12CA16
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 26,600
USD: 166.86
-
Shank Bit for T-Max P Negative Tip PTTNR2525M22
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 17,500
USD: 109.77
-
Cartridge for T-Max P Negative Tip PTWNL12CA16
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 26,600
USD: 166.86
-
Cartridge for T-Max P Negative Tip PTWNR12CA16
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 26,600
USD: 166.86
-
Sensaku Holder HP PVJNL1616H16HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 39,000
USD: 244.64
-
Sensaku Holder HP PVJNL2020K16HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 43,300
USD: 271.61
-
Sensaku Holder HP PVJNL2525M16HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 45,900
USD: 287.92
-
Sensaku Holder HP PVJNL3225P16HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 50,300
USD: 315.52
-
Sensaku Holder HP PVJNR1616H16HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 39,000
USD: 244.64
-
Sensaku Holder HP PVJNR2020K16HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 43,300
USD: 271.61
-
Sensaku Holder HP PVJNR2525M16HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 45,900
USD: 287.92
-
Sensaku Holder HP PVJNR3225P16HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 50,300
USD: 315.52
-
Sensaku Holder HP PWLNL2020K08HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 36,300
USD: 227.70
-
Sensaku Holder HP PWLNL2525M08HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 38,300
USD: 240.25
-
Sensaku Holder HP PWLNR2020K08HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 36,300
USD: 227.70
-
Sensaku Holder HP PWLNR2525M08HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 37,810
USD: 237.17
-
-
-
-
