[SANDVIK K.K.]เครื่องมือตัด
ตัวกรอง
- ตามกลุ่มผลิตภัณฑ์
- ตามผลิตภัณฑ์
เรียงลําดับตาม:
-
Shank Bit for T-Max P Negative Tip PSRNL1212F09
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 14,900
USD: 93.46
-
Cartridge for T-Max P Negative Tip PSRNL16CA12
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 26,600
USD: 166.86
-
Cartridge for T-Max P Negative Tip PSRNL20CA15
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 32,700
USD: 205.12
-
Shank Bit for T-Max P Negative Tip PSRNR1212F09
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 14,900
USD: 93.46
-
Cartridge for T-Max P Negative Tip PSRNR16CA12
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 26,600
USD: 166.86
-
Cartridge for T-Max P Negative Tip PSRNR20CA15
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 32,700
USD: 205.12
-
Cartridge for T-Max P Negative Tip PSSNL12CA12
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 26,600
USD: 166.86
-
Shank Bit for T-Max P Negative Tip PSSNL1616H09
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 14,900
USD: 93.46
-
Cartridge for T-Max P Negative Tip PSSNL16CA12
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 26,600
USD: 166.86
-
Shank Bit for T-Max P Negative Tip PSSNL3225P12
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 19,300
USD: 121.06
-
Shank Bit for T-Max P Negative Tip PSSNL3232P15
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 23,500
USD: 147.41
-
Shank Bit for T-Max P Negative Tip PSSNL4040S19
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 31,200
USD: 195.71
-
Shank Bit for T-Max P Negative Tip PSSNL4040S25
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 31,200
USD: 195.71
-
Cartridge for T-Max P Negative Tip PSSNR12CA12
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 26,600
USD: 166.86
-
Shank Bit for T-Max P Negative Tip PSSNR1616H09
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 14,900
USD: 93.46
-
Cartridge for T-Max P Negative Tip PSSNR16CA12
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 26,600
USD: 166.86
-
Cartridge for T-Max P Negative Tip PSSNR20CA15
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 32,700
USD: 205.12
-
Shank Bit for T-Max P Negative Tip PSSNR3232P15
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 23,500
USD: 147.41
-
Shank Bit for T-Max P Negative Tip PSSNR3232P19
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 23,500
USD: 147.41
-
Shank Bit for T-Max P Negative Tip PSSNR4040S19
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 31,200
USD: 195.71
-
Shank Bit for T-Max P Negative Tip PTDNR2525M22
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 17,500
USD: 109.77
-
Cartridge for T-Max P Negative Tip PTFNL12CA16
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 26,600
USD: 166.86
-
Shank Bit for T-Max P Negative Tip PTFNL1616H16
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 14,900
USD: 93.46
-
Cartridge for T-Max P Negative Tip PTFNL16CA16
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 26,600
USD: 166.86
-
Cartridge for T-Max P Negative Tip PTFNL20CA22
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 32,700
USD: 205.12
-
Shank Bit for T-Max P Negative Tip PTFNL3225P22
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 19,300
USD: 121.06
-
Shank Bit for T-Max P Negative Tip PTFNL3232P27
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 23,500
USD: 147.41
-
Shank Bit for T-Max P Negative Tip PTFNL4040S27
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 31,200
USD: 195.71
-
Cartridge for T-Max P Negative Tip PTFNR12CA16
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 26,600
USD: 166.86
-
Cartridge for T-Max P Negative Tip PTFNR16CA16
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 26,600
USD: 166.86
-
Cartridge for T-Max P Negative Tip PTFNR20CA22
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 32,700
USD: 205.12
-
Shank Bit for T-Max P Negative Tip PTFNR3225P22
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 19,300
USD: 121.06
-
Shank Bit for T-Max P Negative Tip PTFNR3232P27
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 23,500
USD: 147.41
-
Shank Bit for T-Max P Negative Tip PTFNR4040S27
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 31,200
USD: 195.71
-
Shank Bit for T-Max P Negative Tip PTGNL1212F11
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 14,900
USD: 93.46
-
Cartridge for T-Max P Negative Tip PTGNL12CA16
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 26,600
USD: 166.86
-
Shank Bit for T-Max P Negative Tip PTGNL1616H11
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 14,900
USD: 93.46
-
Sensaku Holder HP PTGNL1616H16HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 32,600
USD: 204.49
-
Cartridge for T-Max P Negative Tip PTGNL16CA16
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 26,600
USD: 166.86
-
Sensaku Holder HP PTGNL2020K16HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 36,300
USD: 227.70
