[SANDVIK K.K.]เครื่องมือตัด
ตัวกรอง
- ตามกลุ่มผลิตภัณฑ์
- ตามผลิตภัณฑ์
เรียงลําดับตาม:
-
Sensaku Holder HP PDJNL3225P15HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 42,400
USD: 265.96
-
Sensaku Holder HP PDJNL3232P15HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 51,200
USD: 321.16
-
Sensaku Holder HP PDJNR1616H11HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 32,600
USD: 204.49
-
Shank Bit for T-Max P Negative Tip PDJNR2020K11
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 16,600
USD: 104.13
-
Sensaku Holder HP PDJNR2020K11HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 36,300
USD: 227.70
-
Sensaku Holder HP PDJNR2525M11HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 38,300
USD: 240.25
-
Sensaku Holder HP PDJNR3225P15HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 42,400
USD: 265.96
-
Sensaku Holder HP PDJNR3232P15HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 51,200
USD: 321.16
-
T-Max P Shank Bit for Positive Tip PRDCN4040S25
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 31,200
USD: 195.71
-
T-Max P Shank Bit for Positive Tip PRDCN5050U32
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 46,900
USD: 294.19
-
T-Max P Shank Bit for Positive Tip PRGCL2020K10
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 16,260
USD: 102.00
-
T-Max P Shank Bit for Positive Tip PRGCL2525M16
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 17,160
USD: 107.64
-
T-Max P Shank Bit for Positive Tip PRGCL4040S25
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 31,200
USD: 195.71
-
T-Max P Shank Bit for Positive Tip PRGCL5050T32
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 46,900
USD: 294.19
-
T-Max P Shank Bit for Positive Tip PRGCR4040S25
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 31,200
USD: 195.71
-
T-Max P Shank Bit for Positive Tip PRGCR5050T32
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 46,900
USD: 294.19
-
Shank Bite for T-Max P Negative Tip (210) PRGNL3225P15
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 18,960
USD: 118.93
-
Shank Bit for T-Max P Negative Tip PRGNL3232P19
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 23,500
USD: 147.41
-
Shank Bit for T-Max P Negative Tip PRGNL4040S25
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 31,200
USD: 195.71
-
Shank Bit for T-Max P Negative Tip PRGNR3232P19
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 23,500
USD: 147.41
-
Shank Bit for T-Max P Negative Tip PRGNR4040S25
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 31,200
USD: 195.71
-
Shank Bit for T-Max P Negative Tip PSBNL1616H09
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 14,900
USD: 93.46
-
Shank Bit for T-Max P Negative Tip PSBNL4040S25
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 31,200
USD: 195.71
-
Shank Bit for T-Max P Negative Tip PSBNR1616H09
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 14,900
USD: 93.46
-
Shank Bite for T-Max P Negative Tip (210) PSBNR2525M15
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 17,160
USD: 107.64
-
Shank Bit for T-Max P Negative Tip PSDNN1616H09
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 14,900
USD: 93.46
-
Shank Bit for T-Max P Negative Tip PSDNN3225P19
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 19,300
USD: 121.06
-
Cartridge for T-Max P Negative Tip PSKNL12CA12
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 26,600
USD: 166.86
-
Cartridge for T-Max P Negative Tip PSKNL16CA12
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 26,600
USD: 166.86
-
Shank Bit for T-Max P Negative Tip PSKNL2020K12
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 16,600
USD: 104.13
-
Shank Bit for T-Max P Negative Tip PSKNL2525M15
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 17,500
USD: 109.77
-
Shank Bit for T-Max P Negative Tip PSKNL4040S19
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 31,200
USD: 195.71
-
Shank Bit for T-Max P Negative Tip PSKNL5050T25
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 46,900
USD: 294.19
-
Shank Bit for T-Max P Negative Tip PSKNR1616H09
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 14,900
USD: 93.46
-
Cartridge for T-Max P Negative Tip PSKNR16CA12
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 26,600
USD: 166.86
-
Cartridge for T-Max P Negative Tip PSKNR20CA15
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 32,700
USD: 205.12
-
Shank Bit for T-Max P Negative Tip PSKNR2525M15
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 17,500
USD: 109.77
-
Cartridge for T-Max P Negative Tip PSKNR25CA19
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 37,400
USD: 234.60
-
Shank Bit for T-Max P Negative Tip PSKNR4040S19
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 31,200
USD: 195.71
-
Shank Bit for T-Max P Negative Tip PSKNR5050T25
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 46,900
USD: 294.19
