[SANDVIK K.K.]เครื่องมือตัด
ตัวกรอง
- ตามกลุ่มผลิตภัณฑ์
- ตามผลิตภัณฑ์
เรียงลําดับตาม:
-
Corocut 1 and 2 Shank Bits for Parting and Grooving NF123M324040B
Shank holder for cutting and grooving with high clamp rigidity.
With its unique rail lock seat and V-shaped seat, it firmly receives the cutting force in the lateral direction and provides high stability. (Patented)1พบ ผลิตภัณฑ์
JPY: 34,600
USD: 217.04
-
Corocut 1 and 2 Shank Bits for Parting and Grooving NF123R324040B
Shank holder for cutting and grooving with high clamp rigidity.
With its unique rail lock seat and V-shaped seat, it firmly receives the cutting force in the lateral direction and provides high stability. (Patented)1พบ ผลิตภัณฑ์
JPY: 41,100
USD: 257.81
-
Shank Bit for T-Max P Negative Tip PCBNL3225P16
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 19,300
USD: 121.06
-
Shank Bit for T-Max P Negative Tip PCBNR2525M16
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 17,500
USD: 109.77
-
Shank Bit for T-Max P Negative Tip PCBNR3225P16
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 19,300
USD: 121.06
-
Cartridge for T-Max P Negative Tip PCFNL16CA12
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 26,600
USD: 166.86
-
Cartridge for T-Max P Negative Tip PCFNR16CA12
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 26,600
USD: 166.86
-
Cartridge for T-Max P Negative Tip PCGNL16CA12
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 26,600
USD: 166.86
-
Cartridge for T-Max P Negative Tip PCGNR16CA12
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 26,600
USD: 166.86
-
Shank Bit for T-Max P Negative Tip PCLNL1616H09
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 14,900
USD: 93.46
-
Cartridge for T-Max P Negative Tip PCLNL16CA12
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 26,600
USD: 166.86
-
Shank Bit for T-Max P Negative Tip PCLNL2020K09
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 16,600
USD: 104.13
-
Shank Bit for T-Max P Negative Tip PCLNL2525M09
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 17,500
USD: 109.77
-
Sensaku Holder HP PCLNL2525M16HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 38,300
USD: 240.25
-
Cartridge for T-Max P Negative Tip PCLNL25CA19
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 37,400
USD: 234.60
-
Sensaku Holder HP PCLNL3225P12HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 42,400
USD: 265.96
-
Sensaku Holder HP PCLNL3232P12HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 51,200
USD: 321.16
-
Sensaku Holder HP PCLNL3232P16HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 51,200
USD: 321.16
-
Shank Bit for T-Max P Negative Tip PCLNL4040S25
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 31,200
USD: 195.71
-
Shank Bit for T-Max P Negative Tip PCLNL5050T25
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 46,900
USD: 294.19
-
Shank Bit for T-Max P Negative Tip PCLNR1616H09
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 14,900
USD: 93.46
-
Cartridge for T-Max P Negative Tip PCLNR16CA12
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 26,600
USD: 166.86
-
Shank Bit for T-Max P Negative Tip PCLNR2020K09
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 16,600
USD: 104.13
-
Shank Bit for T-Max P Negative Tip PCLNR2525M09
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 17,500
USD: 109.77
-
Sensaku Holder HP PCLNR2525M16HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 37,810
USD: 237.17
-
Cartridge for T-Max P Negative Tip PCLNR25CA19
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
1พบ ผลิตภัณฑ์
JPY: 37,400
USD: 234.60
-
Sensaku Holder HP PCLNR3225P12HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 42,400
USD: 265.96
-
Shank Bit for T-Max P Negative Tip PCLNR3225P16
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 18,960
USD: 118.93
-
Sensaku Holder HP PCLNR3232P12HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 51,200
USD: 321.16
-
Sensaku Holder HP PCLNR3232P16HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 51,200
USD: 321.16
-
Shank Bit for T-Max P Negative Tip PCLNR4040S25
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 31,200
USD: 195.71
-
Shank Bit for T-Max P Negative Tip PCLNR5050T25
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 46,900
USD: 294.19
-
Shank Bit for T-Max P Negative Tip PDJNL1616H11
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 14,900
USD: 93.46
-
Sensaku Holder HP PDJNL1616H11HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 32,600
USD: 204.49
-
Shank Bit for T-Max P Negative Tip PDJNL2020K11
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 16,600
USD: 104.13
-
Sensaku Holder HP PDJNL2020K11HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 36,300
USD: 227.70
-
Shank Bit for T-Max P Negative Tip PDJNL2020K15
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 16,600
USD: 104.13
-
Shank Bit for T-Max P Negative Tip PDJNL2525M11
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 17,500
USD: 109.77
-
Sensaku Holder HP PDJNL2525M11HP
Outer diameter turning holder compatible with high pressure coolant.
Since the cutting edge is cooled directly by the coolant, the cutting speed can be improved and the chip life can be extended.1พบ ผลิตภัณฑ์
JPY: 38,300
USD: 240.25
-
Shank Bit for T-Max P Negative Tip PDJNL3225P15
The first recommended turning tool for outer diameter roughing and finishing, the chip is negative and has a center hole so it can be quickly and accurately determined.
Compatible with outer diameter turning and negative chips.1พบ ผลิตภัณฑ์
JPY: 19,300
USD: 121.06
