69-8232-38 Tube Fitting PP Partition Union P PPMP12
คุณลักษณะ
- The body material uses PP suitable for clean environment.
- The metal part uses SUS304.
- Oil free specification.
- The resin body color is clear and fluid can be checked.
ข้อมูลจําเพาะ
- Applicable Tube Outer Diameter D (mm): 12 x 12
- Hex Opposite Side (mm): 27
- Fluids used: air, water (subject to conditions), other chemicals (subject to conditions)
- Maximum Working Pressure: 1.0 MPa (0~20°C)
- Working vacuum pressure (kPa): -100
- Operating temperature range (°C): 0~80 (without freezing)
- For chemicals, solvents, mixed gases, etc., compliance with our company specifications may differ depending on usage conditions. Please contact our company.
- The resin may deteriorate due to direct sunlight or ultraviolet rays.
- Since it is oil-proof, the tube is tighter than the standard type. When using, make sure that the tube is inserted to the end of the tube. When installing, apply a liquid that does not cause problems in use to the tube to improve the installation.
- For the maximum operating pressure when the operating pressure exceeds 20°C, refer to the "Relationship between Operating Temperature and Maximum Operating Pressure" available in our company catalog or on our website.
- Material/Finish: Body: PP, Metal Part: SUS304, Seal Rubber: EPDM
- Country of Origin: Japan
- Securities Code: 809-5699
ขนาดแพ็คเกจ:150×100×29 mm 40 g [เกี่ยวกับขนาดแพ็คเกจ]
| หมายเลขใบสั่ง | 69-8232-38 | |
|---|---|---|
| หมายเลขแบบจําลอง | PPMP12 | |
| ราคามาตรฐาน |
JPY: 3,060
USD: 19.18
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| ปริมาณ | 1piece | |
| หุ้นในประเทศญี่ปุ่น |
|
|
| หุ้นซัพพลายเออร์ |
|
|
