ข้อมูลจําเพาะ

• Actuator: hinge lever type, stainless steel lever
• Contact Configuration: 1c (Single Pole Double Throw Type), Rivet, Silver Alloy
• Contact spacing (standard): 0.5 mm
• Terminal Specifications: Soldering Terminal
• loads: general loads
• Rated current: 10.1 A
• Opening Capacity (AC): Resistive Load: 250 VAC 10.1 A
• Allowable inrush current: normally closed circuit: 20 A maximum, normally open circuit: 15 A maximum
• Ambient temperature range: -25~120°C 60%RH or less (Do not freeze or dew condense.)
• Ambient humidity range: 85%RH or less at 5~35°C
• Permissible Operation Frequency: Electrical: 60 times/min or less, Mechanical: 400 times/min or less
• Contact resistance (initial value): 30 mΩ or less
• Insulation resistance: 100 MΩ or more (with 500 VDC insulation resistance meter)
• Withstand voltage: Separator used, Same pole terminal: 1000 VAC 50/60Hz 1min, Charged metal part and ground: 1500 VAC 50/60Hz 1min, Terminal and non-charged metal part: 1500 VAC 50/60Hz 1min
• Durability: Electrical: 50,000 times or more (30 times/min), Mechanical: 10 million times or more (60 times/min)
• Protective Structure: Heat-Resistant IP40
• Electrostatic Protection Class: Class I
• Tracking characteristics (PTI): 175
• Force required for operation (OF): nominal maximum 0.49 N
• Return force (RF): nominal minimum 0.06 N
• Movement after operation (OT): nominal minimum 1.0 mm
• Hydraulic Motion (MD): Standard Maximum 1.0 mm
• Free position (FP): Standard maximum 13.6 mm
• Operating Position (OP): Standard 8~9.6 mm
•