ข้อมูลจําเพาะ

• Power supply voltage: 100~240 VAC (50/60 Hz)
• Allowable voltage variation range: 85~ 110% of rated power supply voltage
• Power Consumption: Approx. 12VA (240 VAC)/Approx. 2.5 W (240 VAC)
• Time specification (number of ranges): 1
• Setting time range (range): 1 s to 99min 59 s
• Input method: with contact: input by opening and short circuit of contact, without contact: input by ON/OFF of open collector transistor
• Output mode: N: Power on delay
• Control Output (Contact Output): 1c, Resistance Load: 250 VAC 3 A (cosφ=1), Minimum Applicable Load: 5 VDC 10 mA (P level, reference value)
• Resetting method: power reset/external reset
• Power reset: Minimum power-open time: 0.5 s
• External reset and gate: Minimum input signal width: 0.02 s, Residual voltage: 2 V or less
• display mode: add (increase from 0 to set value)
• Display method: 7-segment LED 4-digit
• Character height: 10 mm
• Operating Temperature Range: -10~55°C(However, it should not freeze.)
• Storage Temperature Range: – 25~65°C(However, it should not freeze.)
• Operating Humidity Range: 35~85%
• Variation in operating time: Power start: ±0.01%±0.05 s or less (percentage of set value), Reset start: ±0.005%±0.03 s or less (percentage of set value)
• Setting error: Power start: ±0.01%±0.05 s or less (percentage of set value), Reset start: ±0.005%±0.03 s or less (percentage of set value)
• Effect of voltage: Power start: ±0.01%±0.05 s or less (percentage of set value), Reset start: ±0.005%±0.03 s or less (percentage of set value)
• Temperature effect: Power start: ±0.01%±0.05 s or less (percentage of set value), Reset start: ±0.005%±0.03 s or less (percentage of set value)
• Insulation resistance: between conductive part terminal and exposed non-charged metal part: 100 MΩ or more (at 500 VDC), between operation power supply circuit and control output circuit: 100 MΩ or more (at 500 VDC)
• Withstand voltage: between conductive part terminal and exposed non-charged metal part: 2000 VAC 50/60Hz 1min, between operation power supply circuit and control output circuit: 2000 VAC 50/60Hz 1min
• Impulse voltage: 6 kV between operation power terminal, 6 kV between conductive terminal and exposed uncharged metal part
• Noise resistance: Between operation power terminals: ±2 kV, Square wave noise by noise simulator
• Electrostatic Resistance: 8 kV (Malfunction)
• Vibration Resistance: Durability: 10~55 Hz Single Amplitude 0.75 mm 3 Direction 2h Each, Malfunction: 10~55 Hz Single Amplitude 0.5 mm 3 Direction 10min Each
• Shock Resistance: Endurance: 300 m/s**2, 3 times each in 6 directions, Malfunction: 100 m/s**2, 3 times each in 6 directions
• Life: Electrical: 100,000 times or more (250 VAC 3 A resistive load), Mechanical: 10 million times or more
• Mounting method: embedded mounting, surface mounting (shared)
• External connection method: 8-pin socket
• Case Color: Light Gray (Munsell 5Y7/1)
• Applicable Socket: P2CF-08, P2CF-08-E, P3G-08
• Optional Product: Soft Cover: Y92A-48D, Hard Cover: Y92A-48B, Recessed Mounting Adapter: Y92F-30
• Weight: about 110 g
•