68-1887-39-56 Oxygen Analyzer with Built-in High-Precision Sensor with English Calibration Certificate OXY-Lo
คุณลักษณะ
- Uses a fast response sensor to measure residual oxygen concentration in low concentration areas.
- Can measure up to a finer unit (0.01%) than general oxygen meters.
- Lightweight and compact, it fits in the palm of your hand.
- One-touch atmospheric adjustment is possible.
- Monitor sensor output and display life.
- Since it has a built-in sensor, no setup is required, and measurement can be performed immediately after turning on the power.
- Ideal for closed environments (Glove box, desiccator, etc.).
ข้อมูลจําเพาะ
- built-in sensor type
- Detection gas: Oxygen
- Measurement principle: Galvanic battery type
- Measuring range: 0.00~25.00% (Service range: to 35.00% displayed)
- Resolution: 0.01% (0.00 ~ 9.99%), 0.1% (10.0 ~ 30.0%)
- Response speed: Within 5 seconds (90% response) (Atmosphere <20.7%O2>→2.07%O2 * under manufacturer's measurement conditions)
- Accuracy of measurement: ±0.1%O2 (at oxygen concentrations below 10% oxygen)/±0.5%O2 (at oxygen concentrations above 10% oxygen)
- Operating temperature: -10~40°C
- Operating Humidity: 5~85%RH (non-condensing)
- Working barometric pressure: atmospheric pressure (1013 [hPa]) ±10%
- Alarm: None
- Battery life: Approx. 4,400 hours (Reference value, span adjustment frequency, operating temperature, etc.)
- Measured value display: LCD3 digits
- Sensor expected life: Approximately 2 years in air (may vary depending on operating environment)
- Power Supply: AAA Alkaline Batteries x 2 (Included for Testing)
- Exterior Case Material: ABS Resin
- Size: 88 x 35 x 55 mm (excluding protrusions)
- Weight: 125 g
| หมายเลขใบสั่ง | 68-1887-39-56 | |
|---|---|---|
| หมายเลขแบบจําลอง | OXY-Lo | |
| รหัส JAN | 4580809772248 | |
| ราคามาตรฐาน |
JPY: 117,300
USD: 735.79
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| ปริมาณ | 1unit | |
| หุ้นในประเทศญี่ปุ่น |
|
|
| หุ้นซัพพลายเออร์ |
|
|