ข้อมูลจําเพาะ

• Detection method: Visible light photoelectric reflection method, contact method (when the contact adapter HT-0502 is installed)
• unit of measurement
• Rotational speed: r/min, r/s
• Circumferential speed: m/min
• Cumulative Count: COUNT
• Period: ms
• Measurement Range (non-contact system, contact system)
• r/min (Lo Range): 6.0~600.0, 6.0~600.0
• r/min (Hi Range): 6~99999, 6~ 20,000
• r/s: 0.10~999.99, 0.10~400.00
• m/min: 0.6~9999.9, 0.6~400.0
• COUNT: 0~99999, 0~99999
• ms: 0.6~9999.9, 2.5~9999.9
• Reflection detection distance: 20~300 mm
• Display: LCD display 5 digits, with backlight (character height/10.2 mm)
• Measurement time: 1 second +1 cycle time (However, in the case of 60r/min or less, about 2 times the period time (Max))
• Refresh time: about 1 second
• Measurement accuracy: Displayed value (*) × (±0.02%) ±1 Count * Displayed values are counted without decimal points.
• (Note)Accuracy of measurement of peripheral speed depends on the rotational speed of the rotor.
• The above measurement accuracy is for non-contact measurement. Also, errors due to camera shake are not included. For contact measurement, contact slip and accuracy are added.
• Peak hold function: maximum value (MAX), minimum value (MIN)
• Memory function: Up to 20 data
• Overrange function: Overrange (ERROR mark) is displayed when the measured value exceeds the displayed range.
• Rotation upper limit warning function: Upper limit warning (↑ mark) is displayed when the rotation speed exceeds the preset upper limit value.
• Peripheral speed calculation function: Calculate peripheral speed from preset diameter value (mm) and measured rotational speed (non-contact type) < For contact type measurement, use peripheral speed ring KS-100/200 >
• Integration function: Integrates and counts the number of pulses of the input signal.
• Period measurement function: Measure the period of the input pulse (However, in the case of 1 second or less, the average value of the input pulse).
• Rotational speed: non-contact (reflecting mark), contact (using KS -300)
• analog output
• Output Voltage: 0~1 V/0 to Full Scale (Full Scale can be set arbitrarily)
• Conversion method: 10bitD/A conversion method
• Linearity: ±1%/full scale
• Output update time: 50 ms+1 cycle time
• Temperature stability: +/- 0.05%/full scale/deg. C (span & 0)
• Setting error: ±0.5%/full scale
• Load resistance: 100 kΩ or more
• pulse output
• Output voltage: Hi+4.5 V or more (when the reflection mark is detected), Lo+0.5 V or less
• Output Logic: Positive Logic
• Load resistance: 100 kΩ or more
• Operating Temperature Range: 0 to +40°C
• Storage Temperature Range: -10 to +50°C
• Power: 4 AAA batteries (1.5 V) or AC adaptor (option PB-7090)
• Battery life: 32 hours or more (backlight off), 8 hours or more (backlight on)
• Low battery indicator: When the battery voltage drops below about 4.5 V, the warning indicator (LOW indicator) is displayed.
• External Dimensions: 66 (W) x 180.5 (H) x 47.5 (D) mm (Body Only), 66 (W) x 237.2 (H) x 57.5 (D) mm (Contact Adapter + Rotating Contact)
• Weight (including batteries): Approx. 220 g (body only), Approx. 282 g (contact adapter + rotary contactor)
• Accessories
• One HT-0502 Contact Adapter
• KS-300 Rotating Contact x 1
• KS-200 Circumferential Speed Ring x 1
• Reflection Mark 1 Sheet (25 12 mm Sq.)
• AA size dry batteries (1.5 V) x 4
• Carrying Case x 1
• Owner's Manual (Function Explanation (Japanese/English), Basic Operation (Japanese/English)) Each x 1
• Options
• PB-7090AC Adapter
• AX-501 output cable with BNC connector (2 m, for both analog and pulse output)
• HT-011 Reflective Mark (10 Sheets 1 Pair)
• HT-0521B stand jig (used in combination with HT-0522 magnet stunt)
• HT-0522 Magnet Stand (to be used in combination with HT-0521B Stunt Jig)
• KS-100 circumferential speed ring (unit for circumferential speed measurement mm/s)
• KS-200 Circumferential Speed Ring (Unit for Measuring Circumferential Speed m/min)
• KS-300 Rotating Contact (Conical Rubber Tip for Rotation Measurement)
• KS-700 Extension Shaft (For KS -300)
• Lo Range: 6.0~600.0r/min (1 decimal place)
• Hi Range: 6~99999r/min
• Analog output: 0~1 V/0~F.S. (F.S. can be optionally set.), 10bitD/A conversion
• Pulse output: Hi/+4.5 V or more, Lo/+0.5 V or less
•