คุณลักษณะ

• FESTO Synchronous Belt Shaft Unit - ELGS-TB-KF-60-1500 ST-M-H1-PLK-AA The molded part of the FESTO ELGS-TB series of products is this ELGS-TB-KF-60-1500 ST-M-H1-PLK-AA Synchronous Belt Shaft Unit. This shaft is Durable and has a precision load-bearing in-slide guide that provides long-term protection for compact stainless steel cover strips. This product is sometimes called a mini slide unit and contains a stepper motor that operates mechanically in a linear manner with a gear belt. This unit is part of the FESTO Simple Motion series, with a wide range of features and a complete solution for easy movement between two mechanical termination positions. The axes are very easy to configure, place and manipulate in your work without the need for software, and are even easier to use. Built-in drive with all necessary electronics Two control options are integrated as standard: Digital I/O and IO-Link Internal guides protect against external influences All parameters can be manually set directly on the drive, simplifying commissioning (no need to be a commissioning expert). End position feedback is similar to conventional feedback Proximity switch integrated as standard Choice of flexible motor mounts Up to 4 side actuators also equipped with end position with integrated user interface Sensing drive pinion effective diameter 24.83 mm Severity level 1 shock resistance tested Compliant with FN 942017-5 and EN60068-2-27 Insulation protection Class B 0 ~ 90% relative humidity Rotor position sensor - Absolute encoder, single rotation working stroke Size 60 with 1600 mm 0.124% toothed belt stretch with 3 mm toothed belt pitch Pre-assembled in horizontal position Equipped with recirculating ball bearing guide Ambient temperature: 0 °C to 50 °C Protection rating IP40 Simplified Motion series features and benefits This simple motion series combines the simplicity of pneumatic with the advantages of electrical automation tasks. This simple motion series offers a range of internal drives and is the ideal solution when looking for an alternative to traditional electric drive systems, which are usually complex and complex, to replace simple movement and positioning tasks. IO-Link and Digital I/O (DIO) are included and no software is required for operation. The design is simply based on "plug and work." Plug and work principle allows easy commissioning, all parameters can be manually adjusted directly to the actuator, no software required Each drive is designed to be easily moved between Offers a complete solution with built-in two end position actuators, motor and servo driver Designed for swivel work and for applications with high loads Cable and hose with hollow shaft for integrated ducting Electrical mini slides Standardized mounting interface for direct connection to EGSL, EGSC and egss Integrated end positioning detection Simplified Motion Series products: No external servo drive or control cabinet required for installationYes to Festo Simplified Motion Series Integrated - The electronics built into the drive are the heart of the Simplified Motion series. Simple - For commissioning, simply set all relevant parameters directly on the drive (Velocity and force, reference end position and cushion, manual operation) Standardized - Electrical connections with M12 plug design (Power supply 4-pin: Power supply for motor, logic 8-pin control signal, sensor signal, power supply for internal electronic equipment) Connected - with enhancements available via IO-Link (Set motion parameters remotely, transfer parameters with copy and backup functions, read function available for advanced process parameters)