คุณลักษณะ

• The molded part of the Schneider Electric Modicon M262 Logic Modicon M262 product is a logic motion controller operating at a rated voltage of 24 V dc. Equipped with automatic reset, reverse polarity protection, and manual short-circuit protection, it also provides short-circuit and overload protection. The communication port protocols are Ethernet IP/Modbus TCP, Serial Link, Modbus RTU, ASCII, HTTP, and HTTPS. Seven remote I/O expansion modules and seven local I/O expansion modules with real-time clock LED Signal Dimensions: 100 mm H x 90 mm D x 125 mm W Maximum Output Frequency: 300 kHz PLC Power Consumption: 82 W Backup Time: 1000 hours (25 ° Product Information - Modicon M262 M262 Logic and Motion Controllers are control systems that provide an all-in-one solution for motion applications and a scalable solution for logic applications with optimized configurations and an open and extensible architecture. The M262 logic and motion controllers are powerful and versatile. Configuration, programming and commissioning of the software is performed with EcoStruxure Machine Expert software version 1.1. Achieve maximum hardware configurations as well as local and remote configurations. Programming Languages - The M262 logic and motion controllers are configured and programmed with EcoStruxure Machine Expert software and support the following IEC 61131-3 programming languages: IL: Instruction List ST: structured text FBD: functional block diagrams SFC: Sequential Function Chart LD: Ladder Diagram You can also use the EcoStruxure Machine Expert software to program the controller using the CFC (Continuous Function Chart) language. Power Supply - The M262 Logic/Motion Controller has a 24 V dc power supply Real Time Clock - The M262 Logic/Motion Controller has an integrated Real Time Clock (RTC) system. System time is maintained by the capacitor when the power is off. If no controller is supplied, the time is maintained for 1,000 hours. Run/Stop - The M262 Logic/Motion Controller can be operated externally in the following ways: Hardware run/stop switch Run/stop operation with a dedicated digital input defined in the software configuration. For more information, see Set up digital input (Modicon M262 Logic and Motion Controllers, see Programming Guide). PLC_W system variable in the EcoStruxure Machine Expert software command relocation table Web Server Memory - Available in 3 memory types, varying sizes of RAM, flash and non-volatile RAM depending on the application Integrated Input/Output Types - Fast Input and Fast Source Output Encoders - Incremental and SSI encoder modes available Removable Storage - The M262 Logic/Motion Controller has an integrated SD card slot. The main uses for SD cards are: Initializing the controller with a new application Updating the firmware of the controller and expansion modules Applying post-configuration files to the controller Recipes, storing files Receiving data log files Embedded communication - The Modicon M262 product features embedded communication and includes Ethernet, USB Mini-B, Serial Line and Sercos communication ports. What is a PLC CPU? A PLC (Programmable Logic Controller) is an industrial digital computer designed to control manufacturing processes and robotic equipment that require reliability control, simple programming, and fault diagnosis. It was originally designed to replace electromechanical relay systems in industrial automation. The CPU (central processing unit) forms part of the PLC system. PLC CPUs are microprocessor-based and function as electronic circuits in industrial computers. Executes instructions from computer programs and performs basic math, logic, control, and input/output operations.