SATO PARTS CO., LTD.

64-5846-64 Connection protection Cover for Fuse Holder F -810 F-810-C

ข้อมูลจําเพาะ

  • Operating temperature (deg. C): -10 to + 80 (including temperature rise at connection)
  • Protection rating: IP 66
  • Operating humidity range: 35 ~ 85% RH (no icing)
  • Heat-resistant temperature (degrees Celsius): (resin) + 125
  • Storage temperature and humidity range: -10 to + 60 degrees C/35 ~ 85% RH (no freezing or condensation)
  • Connectable wire (mm 2): 0.75 or less, finished outer diameter 1.5 mm -2.8 mm
  • *Cut the grommet according to the outside diameter of the wire before use.
  • (Stepped Brommet)
  • Stage1:1.5mm-2.1mm(VSF0.3mm2)
  • Stage2:2.2mm-2.5mm(VSF0.5mm2)
  • Stage3:2.6mm-2.8mm(VSF0.75mm2)
  • Fuse Holder for Relay F -810
  • Protective cover for connecting parts, such as crimped sleeves and crimped terminals * Not for use under the Electrical Appliances and Material Safety Act (PSE). *To avoid the risk of electric shock, do not open the cap with the voltage applied. *It can not be used underwater. *Water may enter the product depending on the operating conditions. Please use after checking thoroughly. *Do not use the product outdoors or in direct sunlight. *Condensation may occur inside due to changes in ambient temperature. Remove condensation or use in a place where the ambient temperature changes little. *Depending on the type of solvent or oil, the product may crack or dissolve, so please be careful. *When you run the wire through the grommet, press down on the grommet.
  •  
หมายเลขใบสั่ง 64-5846-64
หมายเลขแบบจําลอง F-810-C
ราคามาตรฐาน JPY: 1,430 USD: 8.96
Excange rate 1USD= 159.53JPY
Valid price in Japan
ปริมาณ 1piece
หุ้นในประเทศญี่ปุ่น
หุ้นซัพพลายเออร์