64-1036-45 แรงกดของคลอรีนที่ติดอยู่กับหลอดลม (สกริว/1.0 MPa/ที่เข้ากันได้/0.05-0.35 MPa) GD-26-NE-A-15A
คุณลักษณะ
- There is no need to worry about red water because corrosion resistant material is used for the welding part.
- Has excellent chlorine resistance against tap water and hot water.
- Since the valve structure adopts a pressure balance structure, the secondary side pressure is kept constant without being affected by the primary side pressure.
- Since it has a sealed structure, even if the diaphragm is damaged, it will not flow out.
- Since it can be disassembled from the upper side in one direction for internal inspection, maintenance and inspection are easy.
- The mounting direction of piping can be horizontal or vertical. (However, 125 A and above is only in the horizontal direction.)
ข้อมูลจําเพาะ
- ชนิดค่า Regulator/Safety: ตัวลดความดัน
- ประเภทวาล์วแบบลดความดัน: กระบังลมเชิงเส้น
- อุณหภูมิสูงสุดของไหล (องศา C): 90
- ชนิดการเชื่อมต่อสกรูซัพพลาย: Rc
- ชนิดการเชื่อมต่อสกรูตัวควบคุม: Rc
- รายละเอียดความดันสูงสุดที่ใช้ได้: 1.0 เอ็มพีเอ
- ของเหลวทํางาน: น้ํา
- ความดันที่ใช้ได้สูงสุด [ประเภท] (MPa): 0.11 ถึง 1
- ชนิดการเชื่อมต่อ: การเชื่อมต่อไดอะมิเตอร์เดียวกัน
- ความดันหลัก (MPa): 1.0 หรือน้อยกว่า
| หมายเลขใบสั่ง | 64-1036-45 | |
|---|---|---|
| หมายเลขแบบจําลอง | GD-26-NE-A-15A | |
| ราคามาตรฐาน |
JPY: 68,500
USD: 429.39
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| ปริมาณ | 1piece | |
| หุ้นในประเทศญี่ปุ่น |
|
|
| หุ้นซัพพลายเออร์ |
|
|
