64-0866-87 เมานท์เตอร์การแปลง HDD 2.5" สําหรับ 2 pc TK-HD252
คุณลักษณะ
- Two 2.5 inch SSDs/HDDs can be installed in one 3.5 inch bay at the same time
- Mounter for fixing 2.5 inch SSDs and HDDs to 3.5 inch bays.
- Secure your 2.5 inch hard drive to your desktop computer.
- Fasten a fast 2.5 inch SSD to your desktop.
- Two 2.5 inch devices of H9.5mm or less can be installed in one 3.5 inch bay.
- Since it is an integrated mounter, it can be easily and firmly fixed compared to products that combine multiple parts.
- Corresponds to bottom hole fixing.
- < Caution > The bay fixing screws are tapping screws and the fixing holes are small diameter. It may not be suitable for cases that are fixed with special screws.
- * The screw positions for fixing the bays are made based on the screw hole positions of the HDD and FDD. However, in a 3.5 inch bay with few screw holes, there is a possibility that only 1 hole position will match.
- * 2.5 inch device with old screw position and (screw hole position used until around 1997) is not supported.
ข้อมูลจําเพาะ
- ขนาด: W 101 x D 122 x H 25 มม.
- ไดรฟ์ที่สนับสนุน: 2.5" HDD, 2.5" SSD
- อุปกรณ์เสริม: 4 สกรูแตะ สกรู 8 มม.
- *ขั้นตอนบนสามารถรองรับอุปกรณ์ที่มีขนาดใหญ่กว่า H 9.5 มม. แต่อาจจะสูงกว่า 3.5 นิ้ว
- *หากคุณติดตั้ง HDD สองตัวซึ่งทําให้เกิดความร้อนสูงโดยไม่มีช่องว่างระหว่างตัว คุณจะต้องใช้มาตรการการกระจายความร้อนอย่างเพียงพอ
- *สําหรับการเชื่อมต่อ parallel ATA (IDE) HDD ให้ใช้ TK-AD 40/TK-AD 40 N/TK-KB 40 NR
- *ฮาร์ดดิสก์ไม่ได้รวมอยู่ในผลิตภัณฑ์นี้
- *ฮาร์ดดิสก์ที่แนบกับผลิตภัณฑ์นี้ไม่ได้รับประกันข้อมูลภายในหรือฮาร์ดดิสก์ไม่ว่าด้วยเหตุผลใดๆ
ขนาดแพ็คเกจ:105×30×160 mm 70 g [เกี่ยวกับขนาดแพ็คเกจ]
| หมายเลขใบสั่ง | 64-0866-87 | |
|---|---|---|
| หมายเลขแบบจําลอง | TK-HD252 | |
| รหัส JAN | 4969887861455 | |
| ราคามาตรฐาน |
JPY: 1,300
USD: 8.09
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| ปริมาณ | 1piece | |
| หุ้นในประเทศญี่ปุ่น |
|
|
| หุ้นซัพพลายเออร์ |
|
|
