คุณลักษณะ

• The heavy-duty type comes with an MS3101A 10SL 2P connector.
• Analog Magnetic Pickup
• These analog output style transducers are available in three sizes: 1/4 inch (standard), 3/8 inch (high power), and 5/8 inch (heavy duty).
• These transducers provide an inexpensive solution whenever you need a simple alternating waveform to accommodate movement through a pole.
• It is a passive device that does not require external power.
• The output voltage is generated in response to variations in the self-induced magnetic field caused by approaching a moving metal part.
• Comes in a sturdy steel case with two securing nuts.
• The output voltage is applied to a load of 100 kΩ with a gap of 0.005 inches at 20 kHz operation.
• This corresponds fairly closely to a pickup 0.13 mm from a large 38 mm diameter gear with 30 teeth rotating at 13000 rpm.
• The output is different under other conditions and is affected by the tooth composition of the large gear.
• In unusual conditions, the following points should be noted when making experimental decisions:
• Use a pickup with a high impedance load and position the pickup close enough to be safe for moving parts. For fairly standard gear-based systems with up to 2.5 mm clearance, use pickups for the fastest large gears