คุณลักษณะ

• Applicable Fuse Tube Size: φ6.4 x 30 mm (φ6.35 x 30 mm)
• Rating: 250 V-7A (50 V MAX.)
• Insulation Resistance: DC500V, 100 MΩ or more
• Voltage Resistance: AC2000V (1 minute)
• Protection Grade: IP66 (1 minute)
• Main Insulation Material: Polycarbonate (UL94 V-2)
• Terminal Metal Fittings: Soldering Terminal (Hand soldering conditions: tip temperature 390±10°C, tip time 5±1 seconds, 2 times)
• Body Color: C (Transparent)
• Connected Wire: 0.75 mm2 or less, Finish Outer Diameter 1.5 mm -2.8 mm (Cut the grommet to match the outer diameter of the wire)
• Relay Type
• Dust and Waterproofing (IP66)
• RoHS Compatible
• ※ Do not open the cap of the fuse holder in the presence of voltage because of the risk of electric shock. *Do not deform the clip, as contact with the fuse may become unstable, causing abnormal heat generation and ignition. *Soldering work should be carried out in such a way that the flux does not adhere to the inside of the clip which is the contact part with the fuse tube. If it sticks, wipe off the flux with alcohol. *Install the fuse tube and insert the fuse clip after the product has cooled sufficiently after soldering. *It cannot be used in water. *Depending on the operating conditions, water may enter. Please check thoroughly before use. *Do not use in places exposed to direct sunlight or outdoors. *Condensation may occur internally due to changes in ambient temperature. Remove condensation or use the product in a place where there is little change in ambient temperature. *Depending on the type of solvent or oil, the product may crack or dissolve. *When you run the wire through the grommet, press the grommet and run it through.