คุณลักษณะ

• By the function of the original mechanism "RAPCON," the door can be opened and closed smoothly.
• The door opens as it lowers toward you, and when fully opened, all openings in the cabinet are visible (except for the unit mount).
• The door closes lightly by the force of the spring.
• The door closes slowly at the end by the action of the damper.
• Since it is attached to the upper part of the cabinet base plate, there is less dead space in the height direction than conventional stays, and it does not obstruct when mounting shelves.
• Various industrial equipment.
• *Separately sold interlocking bar is required for 1 set of main body. If you want to secure the strength in the horizontal direction, install two.
• *Open and close manually.
• *Install in a sturdy and rigid cabinet.
• *Cabinets and doors must be constructed with proper dimensions and perpendicularity.
• *Be careful of the specified dimensions and perpendicularity when mounting.
• *The cabinet outside width, door width, door height, and door mass are limited.
• *When mounting on a glass door, ensure that the width of the glass frame is at least 45 mm.
• *Be sure to install the handle (sold separately) at the center of the door width direction. To make the door easier to open, install below the top of the door washer.
• *Do not operate the product by itself, as it will cause the product to revert to its original state.
• *When using screw adhesive, use one that does not damage the resin part.