54-3655-08 Torque Limiter (2-Shaft Butting Type) TT-□-01 TT-2-01-11-14H-10NM
คุณลักษณะคุณลักษณะ class="init">
54-3655-08 Torque Limiter (2-Shaft Butting Type) TT-□-01 TT-2-01-11-14H-10NM 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
MIKI PULLEY CO.,LTD
54-3655-08 Torque Limiter (2-Shaft Butting Type) TT-□-01 TT-2-01-11-14H-10NM
คุณลักษณะคุณลักษณะ class="init">
54-3655-08 Torque Limiter (2-Shaft Butting Type) TT-□-01 TT-2-01-11-14H-10NM 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
MIKI PULLEY CO.,LTD
54-3655-08 Torque Limiter (2-Shaft Butting Type) TT-□-01 TT-2-01-11-14H-10NM
特徴
- Torque limiter (overload protection device) The overload protection device protects the machine by instantly separating the input and output in case of overload. ・In the event of an overload, the drive key disengages from the slot, separating the input and output to protect the device.
- When the overload is removed, it is automatically connected again with the same torque and the same index position.
- Torque is set by the torque spring built in, so there is no troublesome work such as fine adjustment.
- Because of the power transmission by the drive key, there is no problem in using in oil.
- Unlike friction type, it can cope with adverse environments.
- Torque Tender TT (01) Type ・ It is a 2-shaft butting type that transmits power and protects the machine against overload by inserting 2 shafts from both ends of the torque tender (housing and hub) and fixing both shafts with set screws.
- Since it is a 2-axis butting type, it can also be used as a flexible coupling.
ข้อมูลจําเพาะ
- Shape 2 Axis Butting
- Type: No Signal Pin
- Size: 2
- Spring colour: No colour
- Set torque value (N · m) 10
- B(mm)25
- C(mm)41
- D(mm)55
- E(mm)20
- F(mm)35
- G(mm)11
- H(mm)35
- I(mm)32
- J(mm)5
- L(mm)66
- N(mm)7
- M12-M5
- Housing Hole Diameter A (mm) 11
- Housing Hole Key Groove Standard Old JIS (2 Types)
- Housing Hole Keyway Width W (mm) 4
- Housing Hole Keyway Width W Tolerance 2.5
- Housing Hole Keyway Height T (mm) 12.5
- Hub Hole Diameter K (mm) 14
-
หมายเลขใบสั่งหมายเลขใบสั่งss="init">
54-3655-08 Torque Limiter (2-Shaft Butting Type) TT-□-01 TT-2-01-11-14H-10NM 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
MIKI PULLEY CO.,LTD
54-3655-08 Torque Limiter (2-Shaft Butting Type) TT-□-01 TT-2-01-11-14H-10NM
特徴
- Torque limiter (overload protection device) The overload protection device protects the machine by instantly separating the input and output in case of overload. ・In the event of an overload, the drive key disengages from the slot, separating the input and output to protect the device.
- When the overload is removed, it is automatically connected again with the same torque and the same index position.
- Torque is set by the torque spring built in, so there is no troublesome work such as fine adjustment.
- Because of the power transmission by the drive key, there is no problem in using in oil.
- Unlike friction type, it can cope with adverse environments.
- Torque Tender TT (01) Type ・ It is a 2-shaft butting type that transmits power and protects the machine against overload by inserting 2 shafts from both ends of the torque tender (housing and hub) and fixing both shafts with set screws.
- Since it is a 2-axis butting type, it can also be used as a flexible coupling.
仕様
- Shape 2 Axis Butting
- Type: No Signal Pin
- Size: 2
- Spring colour: No colour
- Set torque value (N · m) 10
- B(mm)25
- C(mm)41
- D(mm)55
- E(mm)20
- F(mm)35
- G(mm)11
- H(mm)35
- I(mm)32
- J(mm)5
- L(mm)66
- N(mm)7
- M12-M5
- Housing Hole Diameter A (mm) 11
- Housing Hole Key Groove Standard Old JIS (2 Types)
- Housing Hole Keyway Width W (mm) 4
- Housing Hole Keyway Width W Tolerance 2.5
- Housing Hole Keyway Height T (mm) 12.5
- Hub Hole Diameter K (mm) 14
-
หมายเลขใบสั่ง
54-3655-08
型番
TT-2-01-11-14H-10NM
ราคามาตรฐาน
JPY: 42,300
USD: 265.34
Excange rate 1USD= 159.42JPY
Valid price in Japan
ปริมาณ
1piece
หุ้นในประเทศญี่ปุ่น
หุ้นซัพพลายเออร์หุ้นซัพพลายเออร์"init">
54-3655-08 Torque Limiter (2-Shaft Butting Type) TT-□-01 TT-2-01-11-14H-10NM 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
MIKI PULLEY CO.,LTD
54-3655-08 Torque Limiter (2-Shaft Butting Type) TT-□-01 TT-2-01-11-14H-10NM
特徴
- Torque limiter (overload protection device) The overload protection device protects the machine by instantly separating the input and output in case of overload. ・In the event of an overload, the drive key disengages from the slot, separating the input and output to protect the device.
- When the overload is removed, it is automatically connected again with the same torque and the same index position.
- Torque is set by the torque spring built in, so there is no troublesome work such as fine adjustment.
- Because of the power transmission by the drive key, there is no problem in using in oil.
- Unlike friction type, it can cope with adverse environments.
- Torque Tender TT (01) Type ・ It is a 2-shaft butting type that transmits power and protects the machine against overload by inserting 2 shafts from both ends of the torque tender (housing and hub) and fixing both shafts with set screws.
- Since it is a 2-axis butting type, it can also be used as a flexible coupling.
仕様
- Shape 2 Axis Butting
- Type: No Signal Pin
- Size: 2
- Spring colour: No colour
- Set torque value (N · m) 10
- B(mm)25
- C(mm)41
- D(mm)55
- E(mm)20
- F(mm)35
- G(mm)11
- H(mm)35
- I(mm)32
- J(mm)5
- L(mm)66
- N(mm)7
- M12-M5
- Housing Hole Diameter A (mm) 11
- Housing Hole Key Groove Standard Old JIS (2 Types)
- Housing Hole Keyway Width W (mm) 4
- Housing Hole Keyway Width W Tolerance 2.5
- Housing Hole Keyway Height T (mm) 12.5
- Hub Hole Diameter K (mm) 14
-
アズワン品番
54-3655-08
型番
TT-2-01-11-14H-10NM
標準価格
JPY: 42,300
USD: 265.34
Excange rate 1USD= 159.42JPY
Valid price in Japan
入り数
1piece
在庫数
サプライヤ在庫
54-3655-08 Torque Limiter (2-Shaft Butting Type) TT-□-01 TT-2-01-11-14H-10NM
คุณลักษณะคุณลักษณะ class="init">
54-3655-08 Torque Limiter (2-Shaft Butting Type) TT-□-01 TT-2-01-11-14H-10NM 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
MIKI PULLEY CO.,LTD
54-3655-08 Torque Limiter (2-Shaft Butting Type) TT-□-01 TT-2-01-11-14H-10NM
特徴
- Torque limiter (overload protection device) The overload protection device protects the machine by instantly separating the input and output in case of overload. ・In the event of an overload, the drive key disengages from the slot, separating the input and output to protect the device.
- When the overload is removed, it is automatically connected again with the same torque and the same index position.
- Torque is set by the torque spring built in, so there is no troublesome work such as fine adjustment.
- Because of the power transmission by the drive key, there is no problem in using in oil.
- Unlike friction type, it can cope with adverse environments.
- Torque Tender TT (01) Type ・ It is a 2-shaft butting type that transmits power and protects the machine against overload by inserting 2 shafts from both ends of the torque tender (housing and hub) and fixing both shafts with set screws.
- Since it is a 2-axis butting type, it can also be used as a flexible coupling.
ข้อมูลจําเพาะ
- Shape 2 Axis Butting
- Type: No Signal Pin
- Size: 2
- Spring colour: No colour
- Set torque value (N · m) 10
- B(mm)25
- C(mm)41
- D(mm)55
- E(mm)20
- F(mm)35
- G(mm)11
- H(mm)35
- I(mm)32
- J(mm)5
- L(mm)66
- N(mm)7
- M12-M5
- Housing Hole Diameter A (mm) 11
- Housing Hole Key Groove Standard Old JIS (2 Types)
- Housing Hole Keyway Width W (mm) 4
- Housing Hole Keyway Width W Tolerance 2.5
- Housing Hole Keyway Height T (mm) 12.5
- Hub Hole Diameter K (mm) 14
-
หมายเลขใบสั่งหมายเลขใบสั่งss="init">
54-3655-08 Torque Limiter (2-Shaft Butting Type) TT-□-01 TT-2-01-11-14H-10NM 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
MIKI PULLEY CO.,LTD
54-3655-08 Torque Limiter (2-Shaft Butting Type) TT-□-01 TT-2-01-11-14H-10NM
特徴
- Torque limiter (overload protection device) The overload protection device protects the machine by instantly separating the input and output in case of overload. ・In the event of an overload, the drive key disengages from the slot, separating the input and output to protect the device.
- When the overload is removed, it is automatically connected again with the same torque and the same index position.
- Torque is set by the torque spring built in, so there is no troublesome work such as fine adjustment.
- Because of the power transmission by the drive key, there is no problem in using in oil.
- Unlike friction type, it can cope with adverse environments.
- Torque Tender TT (01) Type ・ It is a 2-shaft butting type that transmits power and protects the machine against overload by inserting 2 shafts from both ends of the torque tender (housing and hub) and fixing both shafts with set screws.
- Since it is a 2-axis butting type, it can also be used as a flexible coupling.
仕様
- Shape 2 Axis Butting
- Type: No Signal Pin
- Size: 2
- Spring colour: No colour
- Set torque value (N · m) 10
- B(mm)25
- C(mm)41
- D(mm)55
- E(mm)20
- F(mm)35
- G(mm)11
- H(mm)35
- I(mm)32
- J(mm)5
- L(mm)66
- N(mm)7
- M12-M5
- Housing Hole Diameter A (mm) 11
- Housing Hole Key Groove Standard Old JIS (2 Types)
- Housing Hole Keyway Width W (mm) 4
- Housing Hole Keyway Width W Tolerance 2.5
- Housing Hole Keyway Height T (mm) 12.5
- Hub Hole Diameter K (mm) 14
-
หมายเลขใบสั่ง
54-3655-08
型番
TT-2-01-11-14H-10NM
ราคามาตรฐาน
JPY: 42,300
USD: 265.34
Excange rate 1USD= 159.42JPY
Valid price in Japan
ปริมาณ
1piece
หุ้นในประเทศญี่ปุ่น
หุ้นซัพพลายเออร์หุ้นซัพพลายเออร์"init">
54-3655-08 Torque Limiter (2-Shaft Butting Type) TT-□-01 TT-2-01-11-14H-10NM 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
MIKI PULLEY CO.,LTD
54-3655-08 Torque Limiter (2-Shaft Butting Type) TT-□-01 TT-2-01-11-14H-10NM
特徴
- Torque limiter (overload protection device) The overload protection device protects the machine by instantly separating the input and output in case of overload. ・In the event of an overload, the drive key disengages from the slot, separating the input and output to protect the device.
- When the overload is removed, it is automatically connected again with the same torque and the same index position.
- Torque is set by the torque spring built in, so there is no troublesome work such as fine adjustment.
- Because of the power transmission by the drive key, there is no problem in using in oil.
- Unlike friction type, it can cope with adverse environments.
- Torque Tender TT (01) Type ・ It is a 2-shaft butting type that transmits power and protects the machine against overload by inserting 2 shafts from both ends of the torque tender (housing and hub) and fixing both shafts with set screws.
- Since it is a 2-axis butting type, it can also be used as a flexible coupling.
仕様
- Shape 2 Axis Butting
- Type: No Signal Pin
- Size: 2
- Spring colour: No colour
- Set torque value (N · m) 10
- B(mm)25
- C(mm)41
- D(mm)55
- E(mm)20
- F(mm)35
- G(mm)11
- H(mm)35
- I(mm)32
- J(mm)5
- L(mm)66
- N(mm)7
- M12-M5
- Housing Hole Diameter A (mm) 11
- Housing Hole Key Groove Standard Old JIS (2 Types)
- Housing Hole Keyway Width W (mm) 4
- Housing Hole Keyway Width W Tolerance 2.5
- Housing Hole Keyway Height T (mm) 12.5
- Hub Hole Diameter K (mm) 14
-
アズワン品番
54-3655-08
型番
TT-2-01-11-14H-10NM
標準価格
JPY: 42,300
USD: 265.34
Excange rate 1USD= 159.42JPY
Valid price in Japan
入り数
1piece
在庫数
サプライヤ在庫
54-3655-08 Torque Limiter (2-Shaft Butting Type) TT-□-01 TT-2-01-11-14H-10NM
特徴
- Torque limiter (overload protection device) The overload protection device protects the machine by instantly separating the input and output in case of overload. ・In the event of an overload, the drive key disengages from the slot, separating the input and output to protect the device.
- When the overload is removed, it is automatically connected again with the same torque and the same index position.
- Torque is set by the torque spring built in, so there is no troublesome work such as fine adjustment.
- Because of the power transmission by the drive key, there is no problem in using in oil.
- Unlike friction type, it can cope with adverse environments.
- Torque Tender TT (01) Type ・ It is a 2-shaft butting type that transmits power and protects the machine against overload by inserting 2 shafts from both ends of the torque tender (housing and hub) and fixing both shafts with set screws.
- Since it is a 2-axis butting type, it can also be used as a flexible coupling.
ข้อมูลจําเพาะ
- Shape 2 Axis Butting
- Type: No Signal Pin
- Size: 2
- Spring colour: No colour
- Set torque value (N · m) 10
- B(mm)25
- C(mm)41
- D(mm)55
- E(mm)20
- F(mm)35
- G(mm)11
- H(mm)35
- I(mm)32
- J(mm)5
- L(mm)66
- N(mm)7
- M12-M5
- Housing Hole Diameter A (mm) 11
- Housing Hole Key Groove Standard Old JIS (2 Types)
- Housing Hole Keyway Width W (mm) 4
- Housing Hole Keyway Width W Tolerance 2.5
- Housing Hole Keyway Height T (mm) 12.5
- Hub Hole Diameter K (mm) 14
หมายเลขใบสั่งหมายเลขใบสั่งss="init">
54-3655-08 Torque Limiter (2-Shaft Butting Type) TT-□-01 TT-2-01-11-14H-10NM特徴
仕様
| |||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|