4-7776-01-56 【With calibration certificate in English attached】Small Oxygen Monitor with Auxiliary Power Supply OX-600-AS OX-600-AS
คุณลักษณะ
- A small oxygen monitor that can be used to control oxygen concentration in the atmosphere.
- It comes with an AC adapter for auxiliary power that can operate for approximately 4 hours even in the event of a power failure, and a mounting plate for convenient mounting.
- Since a barometric pressure correction sensor is mounted inside the body, there is no fluctuation of the indicated value due to the influence of atmospheric pressure.
- It is compact and lightweight, but the screen size is large and easy to see.
- The alarm is announced in two stages by the backlight and buzzer sound.
- Complies with JIST82012010 (Oxygen Deficiency Measurement Oxygen Meter).
- Can be used to prevent oxygen deficiency accidents in clean rooms and laboratories.
ข้อมูลจําเพาะ
- Gas to be detected: Oxygen
- Detection principle: Diaphragm galvanic battery type
- Intensity display: LCD digital display (3 digits/7 segments/Green/Orange/Red 3-color backlight)
- Detection range (vol%): 0-25
- Display resolution (vol%): 0.1
- Detection method: Diffusion type
- Alarm Setting Value: 1st19vol% (L)/2nd18vol% (LL) [Standard Setting Value]
- Indication accuracy (under the same conditions): within ±0.7vol%
- Response time (same conditions): 90% response within 30 seconds
- Alarm delay time (under the same conditions): Within 5 seconds after detection of 10~11vol% gas in oxygen deficiency alarm (18vol%L alarm)
- Accuracy of alarm set value: The difference between the alarm set value and the concentration indicated value when the alarm is issued is 0.
- Gas alarm type: 2-step alarm (L-LL)
- Gas alarm display: 1st
- Gas alarm operation: self-holding
- Gas Alarm Contact: Voltage-Free Contact 1a Each/Always Non-Excited (Excited during Alarm)
- Failure alarm/self-diagnosis: system error/sensor connection error
- Failure alarm display: content display, backlight flashing (red), buzzer
- Failure alarm operation: automatic recovery
- Contact Capacity: 125 VAC/1 A
- Transmission Specifications: DC4~20 mA (Non-Insulated, Load Resistance 300 Ω or Less)
- Power Cable: Power Cable with AC Adapter (Approx. 3.6 m)
- Power Supply: 100 VAC ±10%/50/60Hz
- Power consumption: up to 5VA
- Auxiliary power operation time: Approx. 4 hours (25°C, no alarm, no lighting)
- Initial Clear: Approximately 25 seconds
- Operating temperature range: -10~40°C (no sudden change)
- Operating humidity range: 90%RH or less (no condensation)
- Working pressure range: atmospheric pressure (80 kPa to 105 kPa)
- Structure: Wall Mounting Type/Sensor Integrated Type
- Set Contents: Main Unit, Power Cable with AC Adapter, Mounting Plate, Mounting Round Screws and Pan Head Screws (2 pcs Each)
- External Dimensions (mm): Body/Approx. 80 (W) x 120 (H) x 35.5 (D), AC Adapter/Approx. 49.8 (W) x 26.3 (H) x 68.2 (D) (Excluding Protrusions)
- Weight (g): Approx. 200 Body/Approx. 200, AC Adapter/Approx. 82 (Including Cable)
- We only do proofreading. Equipment inspection, sensor and parts replacement are not included.
- Please contact us if you would like to have equipment checked or parts replaced.
| หมายเลขใบสั่ง | 4-7776-01-56 | |
|---|---|---|
| หมายเลขแบบจําลอง | OX-600-AS | |
| รหัส JAN | 4580809879350 | |
| ราคามาตรฐาน |
JPY: 125,500
USD: 787.23
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| ปริมาณ | 1unit | |
| หุ้นในประเทศญี่ปุ่น |
|
|
| หุ้นซัพพลายเออร์ |
|
|



