Nakamura Mfg. Co., Ltd. (KANON)

데시피타 버니어 캘리퍼 측정 범위: 0-100

Nakamura Mfg. Co., Ltd. (KANON)

Digital Pitagis 100 mm with Calibration Certificate

Nakamura Mfg. Co., Ltd. (KANON)

Digital Pitanogis 100 mm with English Calibration Certificate

Nakamura Mfg. Co., Ltd. (KANON)

디지털 피타 버니어 캘리퍼 최대값, 최소값 유지(측정 범위 포함): 0-150

Nakamura Mfg. Co., Ltd. (KANON)

Maximum/Minimum Hold Digital Pitanogis 150 mm with Calibration Certificate

Nakamura Mfg. Co., Ltd. (KANON)

Maximum/Minimum Hold Digital Pitanogis 150 mm with English Calibration Certificate

Nakamura Mfg. Co., Ltd. (KANON)

[디지털 캘리퍼 측정 범위 설정](위쪽 또는 아래쪽): 0-150

Nakamura Mfg. Co., Ltd. (KANON)

Upper and lower limit setting Digital Caliper 150 mm with Calibration Certificate

Nakamura Mfg. Co., Ltd. (KANON)

Upper and lower limit setting Digital Caliper 150 mm with English Calibration Certificate

Nakamura Mfg. Co., Ltd. (KANON)

피타 버니어 캘리퍼 측정 범위: 0-100

Nakamura Mfg. Co., Ltd. (KANON)

Pitot Caliper with 100 mm with Calibration Certificate

Nakamura Mfg. Co., Ltd. (KANON)

Pita Caliper 100 mm with English Calibration Certificate

Nakamura Mfg. Co., Ltd. (KANON)

디지털 캘리퍼 측정 범위: 0-600

Nakamura Mfg. Co., Ltd. (KANON)

Digital Caliper 600 mm with Calibration Certificate　EMA60J

Standard long digital caliper.
For measuring large objects to be measured. (Inside/Outside)

Nakamura Mfg. Co., Ltd. (KANON)

Digital Caliper 600 mm with English Calibration Certificate　EMA60J

Standard long digital caliper.
For measuring large objects to be measured. (Inside/Outside)

Nakamura Mfg. Co., Ltd. (KANON)

디지털 롱우버니어 캘리퍼 측정 범위: 0-600

Nakamura Mfg. Co., Ltd. (KANON)

양쪽 라운드 노즐 버니어 캘리퍼 측정 범위: 0-200　RA20

You can measure work that cannot be measured by straight jaw.
For measuring the outside of the constricted area and the inside of the bag hole.

Nakamura Mfg. Co., Ltd. (KANON)

직접 판독값 디지털 라운드 홀 피치 버니어 캘리퍼 측정 범위: 15-150(위), 7.5-150(아래)

Nakamura Mfg. Co., Ltd. (KANON)

직접 판독용 디지털 포인트 사이드 버니어 캘리퍼 측정 범위: 20-200　E-ICM20J

Ideal for measuring the inner diameter of grooves in holes.
Direct reading.

Nakamura Mfg. Co., Ltd. (KANON)

버니어 캘리퍼 측정 범위를 사용하여 전화 걸기: 0-200　DMK20J

It is a caliper of rack and pinion system.
It has improved impact resistance and can be used safely.

Nakamura Mfg. Co., Ltd. (KANON)

Dial Caliper 200 mm with Calibration Certificate　DMK20J

It is a caliper of rack and pinion system.
It has improved impact resistance and can be used safely.

Nakamura Mfg. Co., Ltd. (KANON)

Dial Caliper 200 mm with English Calibration Certificate　DMK20J

It is a caliper of rack and pinion system.
It has improved impact resistance and can be used safely.

Nakamura Mfg. Co., Ltd. (KANON)

디지털 높이 계기 측정 범위가 있는 회전 스크라이버: 10-300　EHK30J

Multiple measurements are now possible with a rotating screwdriver.
In addition to height measurement, groove measurement is also available, greatly reducing the measurement time.

Nakamura Mfg. Co., Ltd. (KANON)

높이 계기 유형 3 측정 범위: 0-300

Nakamura Mfg. Co., Ltd. (KANON)

디지털 매우 얇은 구멍 깊이 게이지 20mm 측정 범위: 0-20　E-DP2J

Depth gauge for measuring the depth of ultra-fine holes.
For measuring the depth of ultra-fine holes such as printed circuit boards.

Nakamura Mfg. Co., Ltd. (KANON)

디지털 깊이 게이지 측정 범위: 0-150

Nakamura Mfg. Co., Ltd. (KANON)

칼 마르 유형 깊이 게이지 측정 범위: 0-200　SD20P

It has a wider reference base and can measure depth more stably than a caliper.
Karl Mar type depth gauge with no slight motion feed.

Nakamura Mfg. Co., Ltd. (KANON)

컴팩트 무선 데이터 전송 디지털 캘리퍼스 E-FW　E-FW15

The measured value is easily transmitted by the button operation after the measurement.
The transmitter is built into the caliper body and no cable is required.

Nakamura Mfg. Co., Ltd. (KANON)

Compact Wireless Data Transmission Digital Caliper E-FW with Calibration Certificate　EFW15

The measured value is easily transmitted by the button operation after the measurement.
The transmitter is built into the caliper body and no cable is required.

Nakamura Mfg. Co., Ltd. (KANON)

Compact Wireless Data Transmission Digital Caliper E-FW with English Calibration Certificate

Nakamura Mfg. Co., Ltd. (KANON)

컴팩트 무선 데이터 전송 디지털 캘리퍼스 E-FW　E-FW20

The measured value is easily transmitted by the button operation after the measurement.
The transmitter is built into the caliper body and no cable is required.

Nakamura Mfg. Co., Ltd. (KANON)

Compact Wireless Data Transmission Digital Caliper E-FW with Calibration Certificate　EFW20

The measured value is easily transmitted by the button operation after the measurement.
The transmitter is built into the caliper body and no cable is required.

Nakamura Mfg. Co., Ltd. (KANON)

2523 Ryba Hose Long Jo-Digital Callipers E-LSM R "2523 Ryba"　E-LSM R20J

The length of the outer jaw is 1/2 or more of the maximum measurement length.
The measurement value of "MIN" is retained, and the measurement value can be read as it is even if the outer jaw is widened after the measurement.

Nakamura Mfg. Co., Ltd. (KANON)

2523 Ryba Hose Long Jo-Digital Callipers E-LSM R "2523 Ryba"　E-LSM R30J

The length of the outer jaw is 1/2 or more of the maximum measurement length.
The measurement value of "MIN" is retained, and the measurement value can be read as it is even if the outer jaw is widened after the measurement.

Nakamura Mfg. Co., Ltd. (KANON)

버드 디지털 라운드 홀 피치 버니어 캘리퍼 E-RF　E-RF30J

The pitch of round holes and holes can be measured by direct reading.
Excellent way to read a digital display from a bird's-eye view.

Nakamura Mfg. Co., Ltd. (KANON)

Compact Wireless Data Transmission Digital Caliper E-FW with Calibration Certificate　EFW30

The measured value is easily transmitted by the button operation after the measurement.
The transmitter is built into the caliper body and no cable is required.

Nakamura Mfg. Co., Ltd. (KANON)

Compact Wireless Data Transmission Digital Caliper E-FW with English Calibration Certificate　EFW30

The measured value is easily transmitted by the button operation after the measurement.
The transmitter is built into the caliper body and no cable is required.

Nakamura Mfg. Co., Ltd. (KANON)

［단종］디지털 디지털 블레이드 버니어 캘리퍼 측정 범위: 0-150　E-BL15B

Ideal for measuring outside between grooves in narrow workpieces.
Material is stainless steel (SUS420J2).

Nakamura Mfg. Co., Ltd. (KANON)

［단종］핀 버니어 캘리퍼 맞춤 측정 범위: 0-150

Nakamura Mfg. Co., Ltd. (KANON)

［단종］디지털 어니어 캘리퍼 측정 범위: 0-150