[WORLDTOOL (Astro Products)]작업 도구, 공급
필터
-
오일 필터 플라이어 2009000003040
This is a plier type oil filter remover.
The plier type makes it easy to apply force, so you can remove the filter which is hard to remove.1 제품을 찾았습니다.
JPY: 1,400
USD: 8.78
-
2PC 호스 제거기 세트 2007000010754
It is useful for removing a hose that has become stuck during the removal of a radiator hose or a rubber intake joint.
The rubber grip is easy to grip.1 제품을 찾았습니다.
JPY: 710
USD: 4.45
-
T 형 spr 링 후크 2007000002001
This hook can be used when pulling muffler springs or side stand springs.
1 제품을 찾았습니다.
JPY: 700
USD: 4.39
-
타이어 레버 손잡이 2002000011664
The R-shaped tip makes it difficult to damage the wheel rim.
We recommend that you use them in pairs.1 제품을 찾았습니다.
JPY: 1,400
USD: 8.78
-
록타입 캘리퍼 피스톤툴 2007000011089
This is a plier used to remove the piston of the disc brake caliper.
With a locking mechanism to keep the piston in a restrained state.1 제품을 찾았습니다.
JPY: 3,290
USD: 20.62
-
브레이크 피스톤 큐브 2007000000526
It is mainly used for turning back the piston of the rear disc brake.
The protrusion coming out of the cube fits and secures into the groove of the piston, making it easy to rotate the piston.1 제품을 찾았습니다.
JPY: 810
USD: 5.08
-
고정 랙 2t 핀, 고무 2PC 2007000004296
A rigid rack that is held when a vehicle is jacked up.
You can adjust the height for each stage and pin it.1 제품을 찾았습니다.
JPY: 4,670
USD: 29.27
-
2PC 로우 플로어 견고한 랙 3t 핀(고무 포함) 2007000010655
Since it is a low floor type, it is suitable when using the lowest jack or when working in a low position.
Also, it has a rubber pad, so it is hard to scratch the surface.1 제품을 찾았습니다.
JPY: 5,900
USD: 36.98
-
시트 크리퍼 2003000002201
A parts tray is attached under the sheet, so you can place parts, screws, tools, etc. removed during work.
The seat creeper is just the right height to sit and work.1 제품을 찾았습니다.
JPY: 4,050
USD: 25.39
-
롤러 시트 2007000005354
It is a castor mobile chair that eases the burden on the lower back.
It also comes with a small tray and can be moved with tools and parts.1 제품을 찾았습니다.
JPY: 5,500
USD: 34.48
-
잭 MZJ01 2007000000687
The jack handle is removable and has a 21 mm HEX shape when removed.
It can also be used on Bic scooters and domestic American bikes.1 제품을 찾았습니다.
JPY: 9,500
USD: 59.55
-
모터싸이클라데스 루비요오드화 차단기 블랙 2007000011263
Bead breaker used for dropping tire beads for motorcycles.
Supports up to 150 mm (6 inch) wide tires and is mainly used for small bike tires.1 제품을 찾았습니다.
JPY: 4,050
USD: 25.39
-
경량 알루미늄 래더 평면 1PC 2007000011171
It is a folding ladder rail made of aluminum that is convenient when loading two-wheeled vehicles.
Since it uses an arch type, it is suitable for vehicles with low vehicle height.1 제품을 찾았습니다.
JPY: 14,110
USD: 88.45
-
자전거 진열대 2003000003673
This is a simple type rear stand for bicycles used with the hub of the rear wheel in between.
The height can be adjusted by opening the unit.1 제품을 찾았습니다.
JPY: 1,520
USD: 9.53
-
포장 랙 상자 선택 2003000002027
Large capacity multipurpose aluminum box.
Just the right size for the back of a light truck.1 제품을 찾았습니다.
JPY: 28,500
USD: 178.65
-
쉴드레이버 세트 2007000000021
Seal screwdriver that can drive oil seals straight in.
The resin attachment makes it difficult to damage the object.1 제품을 찾았습니다.
JPY: 3,700
USD: 23.19
-
11PC 베어링 풀러 세트 2007000010310
Puller set for removing inner type bearing.
It can be used for a wide range of work such as wheel bearings for two-wheelers and bearings for water pumps, as it can accommodate a wide range of diameters from φ8 to φ34 mm.1 제품을 찾았습니다.
JPY: 19,900
USD: 124.74
-
스터드 볼트 제거 및 설치 프로그램 2007000010334
A set of stud bolt installers and removers.
By separating the installer from the remover, the thread can be removed and inserted without crushing.1 제품을 찾았습니다.
JPY: 5,500
USD: 34.48
-
M/C 디스크 브레이크 피스톤 툴 2007000011720
Compact type ideal for pushing back disc brake pistons for small vehicles such as motorcycles.
The plate is equipped with two types, the thin side and the thick side. By using the thick side, the brake piston of the automobile can be used.1 제품을 찾았습니다.
JPY: 7,000
USD: 43.88
-
긴목 폴리 드럼 깔때기 2009000004269
Long nozzle funnel.
Since the nozzle is long, it is suitable for use in deep places.1 제품을 찾았습니다.
JPY: 340
USD: 2.13
-
200mm 오일 폴리 드럼 깔때기 2009000004283
It is a large diameter funnel.
Because of its large diameter, it is suitable for injecting many liquids.1 제품을 찾았습니다.
JPY: 400
USD: 2.51
-
블라인드 베어링 풀러-플라스틱 케이스 2010000000021
Slide hammer type puller for 8~30 mm inner diameter bearings.
It is a type that adheres to the inside, and can be used even in narrow places.1 제품을 찾았습니다.
JPY: 21,900
USD: 137.28
-
볼트 유형 풀러 13 조각 세트 2010000000625
Install the supplied bolt into the service hole of the object and install the puller.
Various bolts of millimeter and inch are included in the set, so it can be used for various vehicles and equipment.1 제품을 찾았습니다.
JPY: 1,900
USD: 11.91
-
지팡이 가는 발톱 2010000000632
Thin-claw type puller.
The nail is a sliding type that moves independently from left to right.1 제품을 찾았습니다.
JPY: 3,490
USD: 21.88
-
타이 로드 엔드 풀러 2007000013526
This is a special tool used to remove tie rod ends and ball joints.
The lifting amount can be adjusted to two levels by changing the position of the pin.1 제품을 찾았습니다.
JPY: 3,500
USD: 21.94
-
도구 상자 2003000007633
It is a portable size tool box for storing and storing tools.
It is a tool box of portable size, but with storage space inside the lid and 3 drawers, it has storage capacity.1 제품을 찾았습니다.
JPY: 8,110
USD: 50.84
-
브레이크 피스톤 툴 2007000012994
This tool pushes back the disc brake piston.
Can be used for single type, parallel type, opposite 2-piston type, etc.1 제품을 찾았습니다.
JPY: 4,200
USD: 26.33
-
소형 베어링 세퍼레이터 세트 2007000013366
This puller is a set of a separator and a nail puller.
Can be used to remove bearings, gears and pulleys.1 제품을 찾았습니다.
JPY: 4,200
USD: 26.33
-
플라스틱 사다리 2007000013625
It is a ladder rail that is used when the height needs to be secured when using a jack.
The slope is gentle and the lift is low, so it can be used for vehicles with low vehicle height.1 제품을 찾았습니다.
JPY: 4,350
USD: 27.27
-
오일 팬 7리터 2009000003743
It is an oil pan with a handle.
Since oil can be discharged from the nozzle, waste oil can be easily disposed of without spilling.1 제품을 찾았습니다.
JPY: 700
USD: 4.39
-
오일 팬 스퀘어 2009000004108
It is an oil pan with a net that is useful when you cut the oil from the oil filter or place the removed drain bolt.
It has a discharge port which is useful for discharging waste oil.1 제품을 찾았습니다.
JPY: 700
USD: 4.39
-
와이어 인젝터 2009000004467
Since the wire can be pressed in two places, the lubricant does not leak easily.
Lubricant can be fed directly into the inner wire by simply inserting the outer wire and injecting the lubricant through the injection port.1 제품을 찾았습니다.
JPY: 800
USD: 5.02
-
에어 타이어 게이지 2001000008476
This is an air tire gauge for filling tires such as cars and motorcycles with air by connecting to an air compressor.
Since it is connected to the valve of the tire with a clip chuck, there is no need to press the chuck against it during filling.1 제품을 찾았습니다.
JPY: 1,600
USD: 10.03
-
-
오일 공구 추출기 2009000004702
This is a manual type extractor that does not require a power source and removes oil from oil level gauge guides and oil filler openings.
Two types of hoses with different outer diameters can be used according to the oil viscosity.1 제품을 찾았습니다.
JPY: 3,500
USD: 21.94
-
픽업 도구 2007000001219
Catch small parts that are out of reach with four fingernails on the tip.
It is flexible and can be folded freely.1 제품을 찾았습니다.
JPY: 440
USD: 2.76
-
고치 2007000003572
A convenient bonnet holder that can be easily fixed by stretching and twisting.
The tip has a non-slip rubber leg to prevent scratches on objects.1 제품을 찾았습니다.
JPY: 1,400
USD: 8.78
-
타이어 밸브 도구 2007000004739
This is a standard tire valve screwdriver.
For beetles.1 제품을 찾았습니다.
JPY: 500
USD: 3.13
-
오일 팬 분리기 2007000005477
This is a special tool for removing oil pans.
Insert the blade into the gap between the engine and the oil pan and hit it from the side with a hammer to cut the gasket.1 제품을 찾았습니다.
JPY: 1,680
USD: 10.53
-
작업 매트 2007000008140
It is a lightweight folding type, and is a mat type sleeper useful for business trip work and DIY car tinkering.
Comes with a head rest to reduce strain on the neck when working.1 제품을 찾았습니다.
JPY: 2,549
USD: 15.98

