[Unika Company Limited]ORANGE BOOK 2018 새 항목
필터
-
보드 잠금 투명 팩 B-412(40개) B-412
Since the wall is pressed from both inside and outside, it is firmly fixed to the hollow structural wall.
On the back side of the hollow structural wall, the plate part of the presser bends in two stages, thereby exhibiting more stable strength than conventional products.1 제품을 찾았습니다.
JPY: 1,580
USD: 9.90
-
스틸 스크류 밸류 팩 F-425-SV(1000개) F-425-SV
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.1 제품을 찾았습니다.
JPY: 2,810
USD: 17.61
-
스틸 스크류 밸류 팩 F-432-SV(750개) F-432-SV
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.1 제품을 찾았습니다.
JPY: 2,810
USD: 17.61
-
스틸 스크류 밸류 팩 F-545-SV(300개) F-545-SV
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.1 제품을 찾았습니다.
JPY: 2,810
USD: 17.61
-
스틸 스크류 밸류 팩 F-560-SV(250개) F-560-SV
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.1 제품을 찾았습니다.
JPY: 2,810
USD: 17.61
-
B 드릴 FS-432 (110 피스)가 있는 스테인레스 스틸 나사 FS-432B
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Comes with 1 vibration drill for lower hole.1 제품을 찾았습니다.
JPY: 1,860
USD: 11.66
-
B 드릴 FS-432DN(110개)이 없는 스테인레스 스틸 나사 FS-432DN
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
For mounting various types of piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, interior base materials, etc.1 제품을 찾았습니다.
JPY: 1,510
USD: 9.47
-
B 드릴 FS-438B (85 피스)가 있는 스테인레스 스틸 나사 FS-438B
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Comes with 1 vibration drill for lower hole.1 제품을 찾았습니다.
JPY: 1,860
USD: 11.66
-
B 드릴 FS-438DN(85피스)이 없는 스테인레스 스틸 나사 FS-438DN
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
For mounting various types of piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, interior base materials, etc.1 제품을 찾았습니다.
JPY: 1,510
USD: 9.47
-
B 드릴 FS-545DN(45피스)이 없는 스테인레스 스틸 나사 FS-545DN
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
For mounting various types of piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, interior base materials, etc.1 제품을 찾았습니다.
JPY: 1,510
USD: 9.47
-
HSS 고속 구멍 톱(칼라 제외) 12mm HSS-12TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 제품을 찾았습니다.
JPY: 2,210
USD: 13.85
-
HSS 고속 구멍 톱(칼라 제외) 13mm HSS-13TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 제품을 찾았습니다.
JPY: 2,210
USD: 13.85
-
HSS 고속 구멍 톱(칼라 제외) 14mm HSS-14TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 제품을 찾았습니다.
JPY: 2,210
USD: 13.85
-
HSS 고속 구멍 톱(칼라 제외) 39mm HSS-39TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 제품을 찾았습니다.
JPY: 4,330
USD: 27.14
-
HSS 고속 구멍 톱(칼라 제외) 40mm HSS-40TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 제품을 찾았습니다.
JPY: 4,400
USD: 27.58
-
HSS 고속 구멍 톱(칼라 제외) 41mm HSS-41TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 제품을 찾았습니다.
JPY: 4,400
USD: 27.58
-
HSS 고속 구멍 톱(칼라 제외) 42mm HSS-42TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 제품을 찾았습니다.
JPY: 4,400
USD: 27.58
-
HSS 고속 구멍 톱(칼라 제외) 43mm HSS-43TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 제품을 찾았습니다.
JPY: 4,400
USD: 27.58
-
HSS 고속 구멍 톱(칼라 제외) 44mm HSS-44TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 제품을 찾았습니다.
JPY: 4,400
USD: 27.58
-
HSS 고속 구멍 톱(칼라 제외) 45mm HSS-45TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 제품을 찾았습니다.
JPY: 4,880
USD: 30.59
-
HSS 고속 구멍 톱(칼라 제외) 46mm HSS-46TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 제품을 찾았습니다.
JPY: 4,880
USD: 30.59
-
HSS 고속 구멍 톱(칼라 제외) 47mm HSS-47TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 제품을 찾았습니다.
JPY: 4,880
USD: 30.59
-
HSS 고속 구멍 톱(칼라 제외) 48mm HSS-48TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 제품을 찾았습니다.
JPY: 4,880
USD: 30.59
-
HSS 고속 구멍 톱(칼라 제외) 49mm HSS-49TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 제품을 찾았습니다.
JPY: 4,880
USD: 30.59
-
HSS 고속 구멍 톱(칼라 제외) 50mm HSS-50TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 제품을 찾았습니다.
JPY: 5,700
USD: 35.73
-
HSS 고속 구멍 톱(칼라 제외) 51mm HSS-51TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 제품을 찾았습니다.
JPY: 5,700
USD: 35.73
-
HSS 고속 구멍 톱(칼라 제외) 52mm HSS-52TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 제품을 찾았습니다.
JPY: 5,700
USD: 35.73
-
HSS 고속 구멍 톱(칼라 제외) 53mm HSS-53TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 제품을 찾았습니다.
JPY: 5,700
USD: 35.73
-
HSS 고속 구멍 톱(칼라 제외) 54mm HSS-54TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 제품을 찾았습니다.
JPY: 5,700
USD: 35.73
-
HSS 고속 구멍 톱(칼라 제외) 55mm HSS-55TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 제품을 찾았습니다.
JPY: 6,210
USD: 38.93
-
HSS 고속 구멍 톱(칼라 제외) 56mm HSS-56TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 제품을 찾았습니다.
JPY: 6,210
USD: 38.93
-
HSS 고속 구멍 톱(칼라 제외) 57mm HSS-57TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 제품을 찾았습니다.
JPY: 6,210
USD: 38.93
-
HSS 고속 구멍 톱(칼라 제외) 58mm HSS-58TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 제품을 찾았습니다.
JPY: 6,210
USD: 38.93
-
HSS 고속 구멍 톱(칼라 제외) 59mm HSS-59TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 제품을 찾았습니다.
JPY: 6,210
USD: 38.93
-
HSS 고속 구멍 톱(칼라 제외) 60mm HSS-60TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 제품을 찾았습니다.
JPY: 6,880
USD: 43.13
-
HSS 고속 구멍 톱(칼라 제외) 63mm HSS-63TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 제품을 찾았습니다.
JPY: 6,880
USD: 43.13
-
HSS 고속 구멍 톱(칼라 제외) 65mm HSS-65TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 제품을 찾았습니다.
JPY: 7,430
USD: 46.57
-
META-CORE Max 35 Hole Saw 표준 센터 핀 (IKURA SEIKI) MXCP35-8S
Center pin for Unicameta Core Max.
Work Material: Steel Plate, Shape Steel, Cast Iron Plate, Stainless Steel Plate, etc.1 제품을 찾았습니다.
JPY: 1,650
USD: 10.34
-
META-CORE Max 50 Hole Saw 표준 센터 핀 (IKURA SEIKI) MXCP50-8S
Center pin for Unicameta Core Max.
Work Material: Steel Plate, Shape Steel, Cast Iron Plate, Stainless Steel Plate, etc.1 제품을 찾았습니다.
JPY: 1,650
USD: 10.34
-
스틸 스크루 실버 P-425B-S (200 피스) P-425B-S
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Comes with 1 vibration drill for lower hole.1 제품을 찾았습니다.
JPY: 1,360
USD: 8.53
