[Muraki Ltd.]ORANGE BOOK 2018 새 항목
필터
-
산업용 브러쉬 링 락 11094
Our independently developed stainless steel wire has a long life and excellent safety and grindability.
Axed brush with crimped wire.1 제품을 찾았습니다.
JPY: 6,000
USD: 37.64
-
산업용 브러싱 잠금 11095
Our independently developed stainless steel wire has a long life and excellent safety and grindability.
Axed brush with crimped wire.1 제품을 찾았습니다.
JPY: 5,190
USD: 32.56
-
산업용 브러시 30326
Our uniquely developed high-carbon steel wire has long life, excellent safety, and excellent grindability.
A knot type (twisted wire) brush with a shaft for strong cutting.1 제품을 찾았습니다.
JPY: 7,930
USD: 49.74
-
산업용 브러시 30328
Our uniquely developed high-carbon steel wire has long life, excellent safety, and excellent grindability.
A knot type (twisted wire) brush with a shaft for strong cutting.1 제품을 찾았습니다.
JPY: 7,610
USD: 47.74
-
산업용 브러시 30329
Our uniquely developed high-carbon steel wire has long life, excellent safety, and excellent grindability.
A knot type (twisted wire) brush with a shaft for strong cutting.1 제품을 찾았습니다.
JPY: 7,080
USD: 44.41
-
산업용 브러시 30332
Our uniquely developed high-carbon steel wire has long life, excellent safety, and excellent grindability.
A knot type (twisted wire) brush with a shaft for strong cutting.1 제품을 찾았습니다.
JPY: 8,580
USD: 53.82
-
산업용 브러시 30334
Our uniquely developed high-carbon steel wire has long life, excellent safety, and excellent grindability.
A knot type (twisted wire) brush with a shaft for strong cutting.1 제품을 찾았습니다.
JPY: 7,930
USD: 49.74
-
산업용 브러시 30335
Our uniquely developed high-carbon steel wire has long life, excellent safety, and excellent grindability.
A knot type (twisted wire) brush with a shaft for strong cutting.1 제품을 찾았습니다.
JPY: 7,830
USD: 49.12
-
산업용 브러시 30338
Our uniquely developed high-carbon steel wire has long life, excellent safety, and excellent grindability.
A knot type (twisted wire) brush with a shaft for strong cutting.1 제품을 찾았습니다.
JPY: 11,680
USD: 73.27
-
산업용 브러시 30340
Our uniquely developed high-carbon steel wire has long life, excellent safety, and excellent grindability.
A knot type (twisted wire) brush with a shaft for strong cutting.1 제품을 찾았습니다.
JPY: 9,220
USD: 57.84
-
산업용 브러시 30341
Our uniquely developed high-carbon steel wire has long life, excellent safety, and excellent grindability.
A knot type (twisted wire) brush with a shaft for strong cutting.1 제품을 찾았습니다.
JPY: 9,010
USD: 56.52
-
산업용 브러시 30488
It is made of nylon filament embedded with abrasive grains of silicon carbide.
Since the absorption rate is low, wet polishing can work as well as dry polishing.1 제품을 찾았습니다.
JPY: 5,370
USD: 33.69
-
산업용 브러시 30489
It is made of nylon filament embedded with abrasive grains of silicon carbide.
Since the absorption rate is low, wet polishing can work as well as dry polishing.1 제품을 찾았습니다.
JPY: 5,370
USD: 33.69
-
산업용 브러시 30490
It is made of nylon filament embedded with abrasive grains of silicon carbide.
Since the absorption rate is low, wet polishing can work as well as dry polishing.1 제품을 찾았습니다.
JPY: 5,370
USD: 33.69
-
산업용 브러시 30492
It is made of nylon filament embedded with abrasive grains of silicon carbide.
Since the absorption rate is low, wet polishing can work as well as dry polishing.1 제품을 찾았습니다.
JPY: 5,870
USD: 36.82
-
산업용 브러시 30493
It is made of nylon filament embedded with abrasive grains of silicon carbide.
Since the absorption rate is low, wet polishing can work as well as dry polishing.1 제품을 찾았습니다.
JPY: 5,870
USD: 36.82
-
산업용 브러시 30494
It is made of nylon filament embedded with abrasive grains of silicon carbide.
Since the absorption rate is low, wet polishing can work as well as dry polishing.1 제품을 찾았습니다.
JPY: 5,870
USD: 36.82
-
산업용 브러시 30496
It is made of nylon filament embedded with abrasive grains of silicon carbide.
Since the absorption rate is low, wet polishing can work as well as dry polishing.1 제품을 찾았습니다.
JPY: 6,790
USD: 42.59
-
산업용 브러시 30497
It is made of nylon filament embedded with abrasive grains of silicon carbide.
Since the absorption rate is low, wet polishing can work as well as dry polishing.1 제품을 찾았습니다.
JPY: 6,790
USD: 42.59
-
산업용 브러시 30498
It is made of nylon filament embedded with abrasive grains of silicon carbide.
Since the absorption rate is low, wet polishing can work as well as dry polishing.1 제품을 찾았습니다.
JPY: 6,790
USD: 42.59
-
산업용 브러시 30500
It is made of nylon filament embedded with abrasive grains of silicon carbide.
Since the absorption rate is low, wet polishing can work as well as dry polishing.1 제품을 찾았습니다.
JPY: 8,200
USD: 51.44
-
산업용 브러시 30501
It is made of nylon filament embedded with abrasive grains of silicon carbide.
Since the absorption rate is low, wet polishing can work as well as dry polishing.1 제품을 찾았습니다.
JPY: 8,200
USD: 51.44
-
산업용 브러시 30502
It is made of nylon filament embedded with abrasive grains of silicon carbide.
Since the absorption rate is low, wet polishing can work as well as dry polishing.1 제품을 찾았습니다.
JPY: 8,200
USD: 51.44
-
산업용 브러쉬 크림프 엔드 509100 509100
Our uniquely developed high-carbon steel wire has long life, excellent safety, and excellent grindability.
Axed brush with crimped wire.1 제품을 찾았습니다.
JPY: 5,370
USD: 33.69
-
산업용 브러쉬 크림프 엔드 509101 509101
Our uniquely developed high-carbon steel wire has long life, excellent safety, and excellent grindability.
Axed brush with crimped wire.1 제품을 찾았습니다.
JPY: 2,940
USD: 18.44
-
산업용 브러쉬 크림프 엔드 509111 509111
Our uniquely developed high-carbon steel wire has long life, excellent safety, and excellent grindability.
Axed brush with crimped wire.1 제품을 찾았습니다.
JPY: 3,040
USD: 19.07
-
산업용 브러시 링 잠금 611131 611131
Our uniquely developed high-carbon steel wire has long life, excellent safety, and excellent grindability.
Axed brush with knot (torsion) wire.1 제품을 찾았습니다.
JPY: 3,650
USD: 22.90
-
산업용 브러시 링 잠금 611151 611151
Our uniquely developed high-carbon steel wire has long life, excellent safety, and excellent grindability.
Axed brush with knot (torsion) wire.1 제품을 찾았습니다.
JPY: 3,650
USD: 22.90
-
산업용 브러시 드라이브 아버 75129 75129
Drive Arbor for Tip Replacement Brush
1 제품을 찾았습니다.
JPY: 4,560
USD: 28.60
-
E 시리즈 CB2E107C CB2E107C
With a shank diameter of 8.0 mm, it is rigid and can perform efficient cutting with less freaking.
The life of the blade will be longer.1 제품을 찾았습니다.
JPY: 9,990
USD: 62.67
-
E 시리즈 CB7E104C CB7E104C
With a shank diameter of 8.0 mm, it is rigid and can perform efficient cutting with less freaking.
The life of the blade will be longer.1 제품을 찾았습니다.
JPY: 7,820
USD: 49.05
-
E 시리즈 CB3E107C CB3E107C
With a shank diameter of 8.0 mm, it is rigid and can perform efficient cutting with less freaking.
The life of the blade will be longer.1 제품을 찾았습니다.
JPY: 9,630
USD: 60.41
-
카바이드 바 C 나선 시리즈 CB46C105S CB46C105S
Carbide bar with 6 mm shank diameter.
The amount of cutting is large, and the working time can be reduced.1 제품을 찾았습니다.
JPY: 8,070
USD: 50.62
-
카바이드 바 C 시리즈 CB49C101W CB49C101W
Carbide bar with 6 mm shank diameter.
The most commonly used shape.1 제품을 찾았습니다.
JPY: 4,640
USD: 29.11
-
E 시리즈 CB4E105C CB4E105C
With a shank diameter of 8.0 mm, it is rigid and can perform efficient cutting with less freaking.
The life of the blade will be longer.1 제품을 찾았습니다.
JPY: 7,170
USD: 44.98
-
E 시리즈 CB4E106C CB4E106C
With a shank diameter of 8.0 mm, it is rigid and can perform efficient cutting with less freaking.
The life of the blade will be longer.1 제품을 찾았습니다.
JPY: 9,500
USD: 59.59
-
카바이드 바 C 시리즈 CB5C101C CB5C101C
Carbide bar with 6 mm shank diameter.
The number of blades is smaller and the amount of cutting is larger than the normal cross cut and spiral cut.1 제품을 찾았습니다.
JPY: 3,790
USD: 23.77
-
카바이드 바 C 스파이럴 시리즈 CB7C101SC CB7C101SC
Carbide bar with 6 mm shank diameter.
The number of blades is smaller and the amount of cutting is larger than the normal cross cut and spiral cut.1 제품을 찾았습니다.
JPY: 3,680
USD: 23.08
-
카바이드 바 C 스파이럴 시리즈 CB7C102SC CB7C102SC
Carbide bar with 6 mm shank diameter.
The number of blades is smaller and the amount of cutting is larger than the normal cross cut and spiral cut.1 제품을 찾았습니다.
JPY: 4,820
USD: 30.24
-
MRA 산업용 브러시 마이크로튜브 브러시 MRA09645SC MRA-09645SC
Ideal for removing minute burrs in small diameter holes, foreign matter and finishing the inner surface.
Can also be used as a machining center, drilling machine or hand tool.1 제품을 찾았습니다.
JPY: 2,250
USD: 14.11
