Fukudaseiko

카운터보어(육각형 소켓 헤드 볼트, 적용 가능한 볼트: M3 x 바깥쪽 지름 5.9 x 가이드 지름: 3.2)

Fukudaseiko

긴 생크 카운터보어 (육각형 소켓 헤드 볼트, 적용 가능한 볼트: M3 x 바깥쪽 지름 6.5 x 가이드 지름: 3.2)

Fukudaseiko

카운터보어(Counterbore)(카운터싱크 플랫 스크류, 바깥쪽 지름 7.5x 안내선 지름) 3.2 x 총 길이 38)

Fukudaseiko

3C 밀 (육각형 소켓 헤드 볼트 MC 표면 장착 시트 커터) 10 3C10 3C　3C10

With the machining center, not only the flat part but also the part on the slope or curved surface which is difficult to enter the drill in the past, center rubbing, seat rolling and chamfering can be done in a single process.
Center massage.

Fukudaseiko

3C 밀 (육각형 소켓 헤드 볼트 MC 표면 장착 시트 커터) 12 3C12 3C　3C12

With the machining center, not only the flat part but also the part on the slope or curved surface which is difficult to enter the drill in the past, center rubbing, seat rolling and chamfering can be done in a single process.
Center massage.

Fukudaseiko

3C 밀 (육각형 소켓 헤드 볼트 MC 표면 장착 시트 커터) 14 3C14 3C　3C14

With the machining center, not only the flat part but also the part on the slope or curved surface which is difficult to enter the drill in the past, center rubbing, seat rolling and chamfering can be done in a single process.
Center massage.

Fukudaseiko

3C 밀 (육각형 소켓 헤드 볼트 MC 표면 장착 시트 커터) 16 3C16 3C　3C16

With the machining center, not only the flat part but also the part on the slope or curved surface which is difficult to enter the drill in the past, center rubbing, seat rolling and chamfering can be done in a single process.
Center massage.

Fukudaseiko

3C 밀 (육각형 소켓 헤드 볼트 MC 표면 장착 시트 커터) 3 3C3 3C　3C3

With the machining center, not only the flat part but also the part on the slope or curved surface which is difficult to enter the drill in the past, center rubbing, seat rolling and chamfering can be done in a single process.
Center massage.

Fukudaseiko

3C 밀 (육각형 소켓 헤드 볼트 MC 표면 장착 시트 커터) 4 3C4 3C　3C4

With the machining center, not only the flat part but also the part on the slope or curved surface which is difficult to enter the drill in the past, center rubbing, seat rolling and chamfering can be done in a single process.
Center massage.

Fukudaseiko

3C 밀 (육각형 소켓 헤드 볼트 MC 표면 장착 시트 커터) 5 3C5 3C　3C5

With the machining center, not only the flat part but also the part on the slope or curved surface which is difficult to enter the drill in the past, center rubbing, seat rolling and chamfering can be done in a single process.
Center massage.

Fukudaseiko

3C 밀 (육각형 소켓 헤드 볼트 MC 표면 장착 시트 커터) 6 3C6 3C　3C6

With the machining center, not only the flat part but also the part on the slope or curved surface which is difficult to enter the drill in the past, center rubbing, seat rolling and chamfering can be done in a single process.
Center massage.

Fukudaseiko

3C 밀 (육각형 소켓 헤드 볼트 MC 표면 장착 시트 커터) 8 3C8 3C　3C8

With the machining center, not only the flat part but also the part on the slope or curved surface which is difficult to enter the drill in the past, center rubbing, seat rolling and chamfering can be done in a single process.
Center massage.

Fukudaseiko

카운터보어(테이퍼 생크) 10 CBT10　CBT10

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

카운터보어(테이퍼 생크) 12 CBT12　CBT12

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

카운터보어(테이퍼 생크) 14 CBT14　CBT14

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

카운터보어(테이퍼 생크) 16 CBT16　CBT16

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

카운터보어(테이퍼 생크) 18 CBT18　CBT18

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

카운터보어(테이퍼 생크) 20 CBT20　CBT20

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

카운터보어(테이퍼 생크) 22 CBT22　CBT22

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

카운터보어(테이퍼 생크) 24 CBT24　CBT24

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

카운터보어(테이퍼 생크) 30 CBT30　CBT30

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

카운터보어(테이퍼 생크) 36 CBT36　CBT36

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

카운터보어(테이퍼 생크) 42 CBT42　CBT42

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

카운터보어(테이퍼 생크) 45 CBT45　CBT45

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

카운터보어(테이퍼 생크) 48 CBT48　CBT48

Milling for hexagon socket bolts.
The nominal dimensions are the same as those of the commercially available bolts with holes.

Fukudaseiko

밀어내기 핀 카운터보어 10 EPCB10　EPCB10

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

밀어내기 핀 카운터보어 12 EPCB12　EPCB12

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

밀어내기 핀 카운터보어 14 EPCB14　EPCB14

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

밀어내기 핀 카운터보어 16 EPCB16　EPCB16

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

밀어내기 카운터보어 2 EPCB2용 핀　EPCB2

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

밀어내기 핀 카운터보어 2.5 EPCB2.5　EPCB2.5

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

밀어내기 핀 카운터보어 3 EPCB3　EPCB3

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

밀어내기 핀 카운터보어 3.5 EPCB3.5　EPCB3.5

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

밀어내기 핀 카운터보어 4 EPCB4　EPCB4

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

밀어내기 핀 카운터보어 4.5 EPCB4.5　EPCB4.5

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

밀어내기 핀 카운터보어 5 EPCB5　EPCB5

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

밀어내기 핀 카운터보어 6 EPCB6　EPCB6

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

밀어내기 핀 카운터보어 7 EPCB7　EPCB7

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

밀어내기 핀 카운터보어 8 EPCB8　EPCB8

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.

Fukudaseiko

밀어내기 핀 카운터보어 9 EPCB9　EPCB9

Used for sinking holes in extrusion pins for plastic molds.
For extrusion pins.